Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 02 Feb 2004 14:40:24 +0200
From:      "Extech" <extech@dod.co.za>
To:        "Peter Risdon" <peter@circlesquared.com>
Cc:        freebsd-questions@freebsd.org
Subject:   Re: Rockwell Modem
Message-ID:  <200402021440240580.013D66EC@smtp.tridan.co.za>
In-Reply-To: <401E3F87.8080500@circlesquared.com>
References:  <200402021353570082.0112DE42@smtp.tridan.co.za> <401E3F87.8080500@circlesquared.com>

next in thread | previous in thread | raw e-mail | index | archive | help
Here is my plroblem in short.......

I'm using a external Rockwell 56K modem on Freebsd 5.1. When starting up,=
 the modem is quiried by freebsd (the DT light comes on just before the=
 Login prompt is displayed), if I do a ps -aux it seems if the modem is up 

ns3# ps -aux
root 476 0.0 1.4 1232 832 ?? I 11:26AM 0:00.03 /usr/libexec/getty std.9600=
 ttyd0

but when I run cu -lttyd0 the connection just hangs

ns3# cu -lttyd0
Connected

At this point I cannot do any thing and have to cancel cu out of a=
 different session.

I also have the following messages in /var/log/message

Feb 2 11:25:52 ns3 kernel: unknown: <PNP0303> can't assign resources (port)
Feb 2 11:25:52 ns3 kernel: unknown: <PNP0501> can't assign resources (port)
Feb 2 11:25:52 ns3 kernel: unknown: <PNP0700> can't assign resources (port)
Feb 2 11:25:52 ns3 kernel: unknown: <PNP0401> can't assign resources (port)
Feb 2 11:25:52 ns3 kernel: unknown: <PNP0501> can't assign resources (port)

I'm trying to setup the modem to use as a fax modem with Hylafax.

Regards
Extech


*********** REPLY SEPARATOR  ***********

On 2004/02/02 at 12:16 Peter Risdon wrote:

>Extech wrote:
>
>>Hi All
>>
>>Can anyone please help me with instruction or point me to doc's on how to
>install a pnp external Rockwell 56K modem in FreeBSD 5.1
>>  
>>
>Are you having a specific problem? If so, please say what it is. If not, 
>the FreeBSD handbook is your best bet. But in short, you'll need to plug 
>it in to a suitable port, then edit /etc/ppp/ppp.conf to suit your=
 details.
>
>PWR.





Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200402021440240580.013D66EC>