Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 6 Dec 2014 15:49:33 +0000
From:      Ulrich Grey <usenet@ulrich-grey.de>
To:        Luiz Otavio O Souza <lists.br@gmail.com>
Cc:        "freebsd-arm@freebsd.org" <freebsd-arm@freebsd.org>
Subject:   Re: Booting Beagle Board Black fails.
Message-ID:  <20141206154933.b3b2c699c0db491117b5d287@ulrich-grey.de>
In-Reply-To: <CAB=2f8xhfTqdg8m0p%2BW3a%2B55tpJkstTByd_fY8mE4Enun1iXZA@mail.gmail.com>
References:  <20141204180208.7f1f05ca30e779e1a859abda@ulrich-grey.de> <CAFHCsPXRU0dwwsYNt54JJt4RwymkARsimziL8T7xfqp6TyK1Yg@mail.gmail.com> <20141205171355.6a18710d8dbd7af9c8fa02bf@ulrich-grey.de> <CAB=2f8xhfTqdg8m0p%2BW3a%2B55tpJkstTByd_fY8mE4Enun1iXZA@mail.gmail.com>

next in thread | previous in thread | raw e-mail | index | archive | help
I have applied the patch (I had to use the -l option).
Now the BBB is booting successfully (r275482).

Regards

Ulrich
-----------------------------------------------
On Sat, 6 Dec 2014 10:41:47 -0200
Luiz Otavio O Souza <lists.br@gmail.com> wrote:

> On 5 December 2014 at 15:13, Ulrich Grey wrote:
> > I tried it with current, revision 275482:
> > #
> > FreeBSD/armv6 U-Boot loader, Revision 1.2
> > (root@noname.privat, Thu Dec  4 23:55:39 CET 2014)
> >
> [...]
> > musbotg0: <TI AM33xx integrated USB OTG controller> mem 0x47400000-0x47400fff,0x
> > 47401000-0x474012ff,0x47401300-0x474013ff,0x47401400-0x474017ff,0x47401800-0x474
> > 01aff,0x47401b00-0x47401bff,0x47401c00-0x47401fff irq 17,18,19 on simplebus0
> > musbotg0: TI AM335X USBSS v0.0.13
> > Fatal kernel mode data abort: 'External Non-Linefetch Abort (S)'
> > trapframe: 0xc0816d08
> > FSR=00001008, FAR=ffa00010, spsr=40000193
> > r0 =00000000, r1 =ffa00000, r2 =00000010, r3 =c054bd10
> > r4 =c29b1e80, r5 =c2ad4000, r6 =c2ad63d0, r7 =c2ad63ec
> > r8 =c0680a30, r9 =c0709680, r10=00000020, r11=c0816d98
> > r12=c054bd28, ssp=c0816d58, slr=c056b484, pc =c054bd10
> 
> Ulrich,
> 
> Could you try this: http://pastebin.com/k69CFxyy
> 
> For some reason (only happens with USB) we have to wait a bit to read
> from controller registers after issuing a reset and this doesn't
> affect everyone only a few people have seen this here and there.
> 
> HTH,
> Luiz



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20141206154933.b3b2c699c0db491117b5d287>