Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 8 Sep 1999 08:51:45 +0100 (BST)
From:      Doug Rabson <dfr@nlsystems.com>
To:        Randy Bush <randy@psg.com>
Cc:        FreeBSD Current <freebsd-current@freebsd.org>
Subject:   Re: PNP problems
Message-ID:  <Pine.BSF.4.10.9909080851001.2081-100000@salmon.nlsystems.com>
In-Reply-To: <m11OSBU-0008G4C@rip.psg.com>

next in thread | previous in thread | raw e-mail | index | archive | help
On Tue, 7 Sep 1999, Randy Bush wrote:

> >> I built and installed a new world today. My last make world
> >> was some months ago.
> >> It seems that the boot loader has changed. Now, my AWE64
> >> soundcard is not detected anymore.
> >> My kernel.config looks like this
> >> pnp 1 0 os enable port0 0x220 port1 0x330 port2 0x388 irq0 5 drq0 1 drq1 5
> >> pnp 1 2 os enable port0 0x620 port1 0xa20 port2 0xe20
> >> This syntax no longer seems to be supported, instead, the following commands
> >> may be used:
> >> What can I do in order to reenable my soundcard?
> > 
> > Please try using the new pcm driver if you are not already. You should be
> > able to do this by having these lines in your kernel config:
> > 	controller pnp0
> > 	device pcm0
> > Note that you must not have an old-style non-pnp declaration (i.e. device
> > pcm0 at isa? ...) since that currently confuses the pnp system.
> 
> i am in a similar position.  so i did as you say.
> 
>     controller  pnp0                    # PnP support for ISA
>     ...
>     # pcm: Luigi's sound driver
>     #device             pcm0 at isa? port ? irq 5 drq 1 flags 0x0
>     device              pcm0
> 
> now, although pcm0 shows up in dmesg, i get
> 
>     % xmix
>     Error opening mixer device /dev/mixer: Device not configured
> 
> and similar whinging.  xmix worked before the change.

Was the card recognised as pcm1 before? You probably need to go to /dev
and type:

	sh MAKEDEV snd0

--
Doug Rabson				Mail:  dfr@nlsystems.com
Nonlinear Systems Ltd.			Phone: +44 181 442 9037




To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.10.9909080851001.2081-100000>