Date: Wed, 25 Dec 2002 16:21:48 +0100 (CET) From: "Gernot A. Weber" <gernot@quantumnet.de> To: "Sergey A. Osokin" <osa@freebsd.org.ru> Cc: current@freebsd.org Subject: Re: RC2 very unstable on my box Message-ID: <20021225161607.B12465@homer.quantumnet.de> In-Reply-To: <20021225092405.GA21537@freebsd.org.ru> References: <20021225094001.D900@homer.quantumnet.de> <20021225092405.GA21537@freebsd.org.ru>
next in thread | previous in thread | raw e-mail | index | archive | help
> Second idea is tell, if it possible, more information about your
> hardware/kernel-config/dmesg output...
Hardware:
Asus P2B-DS
Dual PIII-450
512MB RAM
NVIDIA TNT2 Chipset
Do you need anything else?
Ok, I did a diff between GENERIC and my own kernel:
su-2.05b# diff GENERIC HOMER
19c19
< # $FreeBSD: src/sys/i386/conf/GENERIC,v 1.369.2.1 2002/12/18 08:11:24
scottl Exp $
---
> # $FreeBSD: src/sys/i386/conf/GENERIC,v 1.369 2002/10/19 16:54:07
rwatson Exp $
25c25
< ident GENERIC
---
> ident KOPERNIKUS
59a60
> options VESA
61,66c62,69
< # Debugging for use in -current
< #options DDB #Enable the kernel debugger
< #options INVARIANTS #Enable calls of extra sanity
checking
< options INVARIANT_SUPPORT #Extra sanity checks of internal
structures, required by INVARIANTS
< #options WITNESS #Enable checks to detect deadlocks
and cycles
< #options WITNESS_SKIPSPIN #Don't run witness on spinlocks
for speed
---
> #
> # DP2-specific Options:
> #
> # Disable certain VM optimizations as they currently cause memory
corruption
> # on newer Pentium4 and Athlon systems.
> #
> options DISABLE_PSE
> options DISABLE_PG_G
69,70c72,73
< #options SMP # Symmetric MultiProcessor Kernel
< #options APIC_IO # Symmetric (APIC) I/O
---
> options SMP # Symmetric MultiProcessor Kernel
> options APIC_IO # Symmetric (APIC) I/O
124,130c127,133
< device aac # Adaptec FSA RAID
< device aacp # SCSI passthrough for aac
(requires CAM)
< device amr # AMI MegaRAID
< device ida # Compaq Smart RAID
< device mlx # Mylex DAC960 family
< device pst # Promise Supertrak SX6000
< device twe # 3ware ATA RAID
---
> #device aac # Adaptec FSA RAID
> #device aacp # SCSI passthrough for aac
(requires CAM)
> #device amr # AMI MegaRAID
> #device ida # Compaq Smart RAID
> #device mlx # Mylex DAC960 family
> #device pst # Promise Supertrak SX6000
> #device twe # 3ware ATA RAID
161c164
< device cbb # cardbus (yenta) bridge
---
> #device cbb # cardbus (yenta) bridge
163,164c166,167
< device pccard # PC Card (16-bit) bus
< device cardbus # CardBus (32-bit) bus
---
> #device pccard # PC Card (16-bit) bus
> #device cardbus # CardBus (32-bit) bus
187c190
< device dc # DEC/Intel 21143 and various
workalikes
---
> #device dc # DEC/Intel 21143 and various
workalikes
189,198c192,201
< device pcn # AMD Am79C97x PCI 10/100
(precedence over 'lnc')
< device rl # RealTek 8129/8139
< device sf # Adaptec AIC-6915 (``Starfire'')
< device sis # Silicon Integrated Systems SiS
900/SiS 7016
< device ste # Sundance ST201 (D-Link
DFE-550TX)
< device tl # Texas Instruments ThunderLAN
< device tx # SMC EtherPower II (83c170
``EPIC'')
< device vr # VIA Rhine, Rhine II
< device wb # Winbond W89C840F
< device xl # 3Com 3c90x (``Boomerang'',
``Cyclone'')
---
> #device pcn # AMD Am79C97x PCI 10/100
(precedence over 'lnc')
> #device rl # RealTek 8129/8139
> #device sf # Adaptec AIC-6915 (``Starfire'')
> #device sis # Silicon Integrated Systems SiS
900/SiS 7016
> #device ste # Sundance ST201 (D-Link
DFE-550TX)
> #device tl # Texas Instruments ThunderLAN
> #device tx # SMC EtherPower II (83c170
``EPIC'')
> #device vr # VIA Rhine, Rhine II
> #device wb # Winbond W89C840F
> #device xl # 3Com 3c90x (``Boomerang'',
``Cyclone'')
201c204
< device cs # Crystal Semiconductor CS89x0 NIC
---
> #device cs # Crystal Semiconductor CS89x0 NIC
203,209c206,212
< device ed # NE[12]000, SMC Ultra, 3c503,
DS8390 cards
< device ex # Intel EtherExpress Pro/10 and
Pro/10+
< device ep # Etherlink III based cards
< device fe # Fujitsu MB8696x based cards
< device lnc # NE2100, NE32-VL Lance Ethernet
cards
< device sn # SMC's 9000 series of ethernet
chips
< device xe # Xircom pccard ethernet
---
> #device ed # NE[12]000, SMC Ultra, 3c503,
DS8390 cards
> #device ex # Intel EtherExpress Pro/10 and
Pro/10+
> #device ep # Etherlink III based cards
> #device fe # Fujitsu MB8696x based cards
> #device lnc # NE2100, NE32-VL Lance Ethernet
cards
> #device sn # SMC's 9000 series of ethernet
chips
> #device xe # Xircom pccard ethernet
215,217c218,220
< device an # Aironet 4500/4800 802.11
wireless NICs.
< device awi # BayStack 660 and others
< device wi # WaveLAN/Intersil/Symbol 802.11
wireless NICs.
---
> #device an # Aironet 4500/4800 802.11
wireless NICs.
> #device awi # BayStack 660 and others
> #device wi # WaveLAN/Intersil/Symbol 802.11
wireless NICs.
231a235,247
> # Firewall
>
> options IPFIREWALL
> options IPFIREWALL_VERBOSE
> options IPDIVERT
> options IPV6FIREWALL
> options IPV6FIREWALL_VERBOSE
>
> options NETGRAPH
> options NETGRAPH_ETHER
> options NETGRAPH_SOCKET
> options NETGRAPH_PPPOE
>
250,252c266,268
< device aue # ADMtek USB ethernet
< device cue # CATC USB ethernet
< device kue # Kawasaki LSI USB ethernet
---
> #device aue # ADMtek USB ethernet
> #device cue # CATC USB ethernet
> #device kue # Kawasaki LSI USB ethernet
dmesg output:
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-RC #1: Tue Dec 24 16:10:12 CET 2002
gernot@homer.quantumnet.de:/usr/obj/usr/src/sys/HOMER
Preloaded elf kernel "/boot/kernel/kernel" at 0xc078f000.
Preloaded elf module "/boot/kernel/splash_bmp.ko" at 0xc078f0a8.
Preloaded splash_image_data "/boot/splash.bmp" at 0xc078f158.
Preloaded elf module "/boot/kernel/linux.ko" at 0xc078f1a8.
Preloaded elf module "/boot/kernel/nvidia.ko" at 0xc078f254.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc078f300.
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (451.03-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x673 Stepping = 3
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 536858624 (511 MB)
avail memory = 513421312 (489 MB)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
IOAPIC #0 intpin 16 -> irq 11
IOAPIC #0 intpin 17 -> irq 10
IOAPIC #0 intpin 18 -> irq 12
IOAPIC #0 intpin 19 -> irq 9
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): apic id: 1, version: 0x00040011, at 0xfee00000
cpu1 (AP): apic id: 0, version: 0x00040011, at 0xfee00000
io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000
Initializing GEOMetry subsystem
Pentium Pro MTRR support enabled
VESA: v3.0, 4096k memory, flags:0x1, mode table:0xc0516d82 (1000022)
VESA: NVidia
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <ASUS P2B-DS > on motherboard
ACPI-0625: *** Info: GPE Block0 defined as GPE0 to GPE15
Using $PIR table, 7 entries at 0xc00f0d20
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-safe" frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_cpu1: <CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem
0xe4000000-0xe7ffffff at device 0.0 on pci0
pcib1: <PCIBIOS PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
nvidia0: <RIVA TNT2> mem 0xe2000000-0xe3ffffff,0xe0000000-0xe0ffffff irq
11 at device 0.0 on pci1
isab0: <PCI-ISA bridge> at device 4.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xd800-0xd80f at device 4.1
on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xd400-0xd41f irq 9
at device 4.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1: Atmel Standard USB Hub, class 9/0, rev 1.10/3.00, addr 2
uhub1: 4 ports with 4 removable, self powered
ums0: Cypress Sem PS2/USB Browser Combo Mouse, rev 1.00/0.10, addr 3,
iclass 3/1
ums0: 5 buttons and Z dir.
ulpt0: Canon S450, rev 1.10/1.02, addr 4, iclass 7/1
ulpt0: using bi-directional mode
ulpt1: HewLett Packard HP LaserJet 1200, rev 1.10/1.00, addr 5, iclass 7/1
ulpt1: using bi-directional mode
Timecounter "PIIX" frequency 3579545 Hz
pci0: <bridge, PCI-unknown> at device 4.3 (no driver attached)
ahc0: <Adaptec aic7890/91 Ultra2 SCSI adapter> port 0xd000-0xd0ff mem
0xdf800000-0xdf800fff irq 9 at device 6.0 on pci0
aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs
pci0: <mass storage, SCSI> at device 9.0 (no driver attached)
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xb400-0xb43f mem
0xde000000-0xde01ffff,0xde800000-0xde800fff irq 12 at device 10.0 on pci0
fxp0: Ethernet address 00:02:b3:1a:c7:21
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1: <Intel Pro 10/100B/100+ Ethernet> port 0xb000-0xb03f mem
0xdd000000-0xdd01ffff,0xdd800000-0xdd800fff irq 10 at device 11.0 on pci0
fxp1: Ethernet address 00:02:b3:1a:93:ea
inphy1: <i82555 10/100 media interface> on miibus1
inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port
0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
orm0: <Option ROMs> at iomem
0xd8000-0xd97ff,0xd4000-0xd57ff,0xcc000-0xd17ff,0xc0000-0xc97ff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
ipfw2 initialized, divert enabled, rule-based forwarding enabled, default
to deny, logging unlimited
IPv6 packet filtering initialized, unlimited logging
ad0: 39266MB <IBM-DTLA-305040> [79780/16/63] at ata0-master UDMA33
ad2: 19464MB <SAMSUNG SV2044D> [39546/16/63] at ata1-master UDMA33
Waiting 15 seconds for SCSI devices to settle
SMP: AP CPU #1 Launched!
da0 at ahc0 bus 0 target 0 lun 0
da0: <IBM DDYS-T09170N S80D> Fixed Direct Access SCSI-3 device
da0: 40.000MB/s transfers (20.000MHz, offset 63, 16bit), Tagged Queueing
Enabled
da0: 8748MB (17916240 512 byte sectors: 255H 63S/T 1115C)
da1 at ahc0 bus 0 target 1 lun 0
da1: <HP 9.10GB C 68-D84D D84D> Fixed Direct Access SCSI-2 device
da1: 40.000MB/s transfers (20.000MHz, offset 63, 16bit), Tagged Queueing
Enabled
da1: 8678MB (17773524 512 byte sectors: 255H 63S/T 1106C)
cd0 at ahc0 bus 0 target 3 lun 0
cd0: <PLEXTOR CD-ROM PX-32TS 1.03> Removable CD-ROM SCSI-2 device
cd0: 20.000MB/s transfers (20.000MHz, offset 15)
cd0: Attempt to query device size failed: NOT READY, Medium not present
cd1 at ahc0 bus 0 target 4 lun 0
cd1: <TEAC CD-R55S 1.0R> Removable CD-ROM SCSI-2 device
cd1: 10.000MB/s transfers (10.000MHz, offset 15)
cd1: Attempt to query device size failed: NOT READY, Medium not present
da2 at ahc0 bus 0 target 2 lun 0
da2: <IBM DDRS-39130W S97B> Fixed Direct Access SCSI-2 device
da2: 40.000MB/s transfers (20.000MHz, offset 15, 16bit), Tagged Queueing
Enabled
da2: 8715MB (17850000 512 byte sectors: 255H 63S/T 1111C)
Mounting root from ufs:/dev/ad2s1a
WARNING: / was not properly dismounted
WARNING: /home was not properly dismounted
WARNING: /tmp was not properly dismounted
WARNING: /usr was not properly dismounted
/usr: mount pending error: blocks 4 files 1
WARNING: /var was not properly dismounted
WARNING: /usr/local/multimedia was not properly dismounted
fxp0: promiscuous mode enabled
sbc0: <Creative ViBRA16C> at port 0x388-0x38b,0x330-0x331,0x220-0x22f irq
5 drq 5,1 on isa0
pcm0: <SB16 DSP 4.13> on sbc0
all.log shows nothing related to a crash. It just stops after a fetchmail
process and next line is the dmesg output...
Do you need anything else?
Merry Christmas,
Gernot
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20021225161607.B12465>