Date: Mon, 20 Apr 2015 09:42:41 +0200 From: Matthias Apitz <guru@unixarea.de> To: Mohammad BadieZadegan <mbzadegan@gmail.com> Cc: freebsd-wireless@freebsd.org Subject: Re: Broadcom BCM4318 Message-ID: <20150420074241.GA3000@c720-r276659> In-Reply-To: <CADMcpTY3hkTfP2zJ0vb-QZo5Qof1mDFsWfuTb60xcjiEC%2BXfOw@mail.gmail.com> References: <CADMcpTY3hkTfP2zJ0vb-QZo5Qof1mDFsWfuTb60xcjiEC%2BXfOw@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
El día Monday, April 20, 2015 a las 12:04:43PM +0430, Mohammad BadieZadegan escribió: > Dear Felix Friedlander, > Thanks for following my issue. > I copied and reinstall your new bwn-kmod-firmware (0.2.0). > I think that my state is better than but still I do not get any IP. > PS: My WiFi LED turned on but it has not get any IP address. > > ************** My dmesg *********** > siba_bwn0: <Broadcom BCM4318 802.11b/g Wireless> mem 0xd0204000-0xd0205fff > irq 20 at device 2.0 on pci5 > bwn0 on siba_bwn0 > bwn0: WLAN (chipid 0x4318 rev 9) PHY (analog 3 type 2 rev 7) RADIO (manuf > 0x17f ver 0x2050 rev 8) > bwn0: DMA (32 bits) > bwn0: firmware version (rev 666 patch 2 date 0xb217 time 0x9e7) > bwn0: warn: firmware state (0) > bwn0: warn: firmware state (0) > bwn0: warn: firmware state (0) > bwn0: warn: firmware state (0) > > ************** My ifconfig ************ > bwn0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 2290 > ether 00:14:a5:63:39:e5 > nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> > media: IEEE 802.11 Wireless Ethernet autoselect mode 11g > status: associated > wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 > ether 00:14:a5:63:39:e5 > nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> > media: IEEE 802.11 Wireless Ethernet autoselect (autoselect) > status: no carrier > ssid "" channel 4 (2427 MHz 11g) > country US authmode WPA2/802.11i privacy ON deftxkey UNDEF txpower 30 > bmiss 7 scanvalid 60 bgscan bgscanintvl 300 bgscanidle 250 roam:rssi 7 > roam:rate 5 protmode CTS wme roaming MANUAL > ********************************************** The interface wlan0 is not associated with any AP (and so it can not get any IP addr). Do you run wpa_supplicant(8) daemon with a correct configuration matching your air radio APs? Btw: Please, do not top post and trim your replies. matthias -- Matthias Apitz, guru@unixarea.de, http://www.unixarea.de/ +49-170-4527211 +49-176-38902045 "Wenn der Mensch von den Umständen gebildet wird, so muß man die Umstände menschlich bilden." "Si el hombre es formado por las circunstancias entonces es necesario formar humanamente las circunstancias", Karl Marx in Die heilige Familie / La sagrada familia (MEW 2, 138)
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20150420074241.GA3000>