Date: Mon, 28 Dec 2009 18:57:41 -0600 From: "Ishmael F.E." <sulfurfff@gmail.com> To: Paul B Mahol <onemda@gmail.com> Cc: freebsd-questions@freebsd.org Subject: Re: ?Bandwidth limit to 31kBps for wlan? Message-ID: <ed5c0bbe0912281657i4486a437p43497560bdd17a8b@mail.gmail.com> In-Reply-To: <ed5c0bbe0912281137w4152d0bfjda369a4403cce54@mail.gmail.com> References: <3a142e750912281050o32418f07j62d3f4e80ef3cde@mail.gmail.com> <ed5c0bbe0912281137w4152d0bfjda369a4403cce54@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
My bad, it was the gateway the one limiting the bandwidth : | Tanks anyway Have a nice day 2009/12/28 > 2009/12/28 > >> On 12/28/09 >> >> > Hi list >> > >> > I have this little issue with my wireless card: >> > No matter where I am or what I'm downloading, >> > I just can't download at more than 31kBps ever >> > (only while using BSD). >> > >> > What should I do to be able to download faster? >> > >> > The bandwidth should be ~400kBps >> > >> > I'm using 8.0. >> > >> > /boot/loader.conf: >> > bcmwl5_load="yes" #I'm using the ndis driver >> > . >> > . >> > /etc/rc.conf: >> > netif_enable="YES" >> > synchronous_dhclient="YES" >> > wlans_ndis0="wlan0" >> > ifconfig_wlan0="WPA DHCP" >> > . >> > . >> > pciconf -lv : >> > ndis0@pci0:3:0:0: class=0x028000 card=0x1366103c chip=0x432814e4 >> rev=0x03 >> > hdr=0x00 >> > vendor = 'Broadcom Corporation' >> > device = 'Broadcom 432AGN 802.11a/b/g/draft-n Wi-Fi Solution >> > (BCM4321KFBG)' >> > class = network >> > . >> > . >> > ndis0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu >> 2290 >> > ether 00:1a:73:00:00:00 >> > media: IEEE 802.11 Wireless Ethernet autoselect mode 11g >> > status: associated >> > wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu >> 1500 >> > ether 00:1a:73:00:00:00 >> > inet 192.168.0.00 netmask 0xffffff00 broadcast 192.168.3.255 >> > media: IEEE 802.11 Wireless Ethernet OFDM/54Mbps mode 11g >> > status: associated >> > ssid Q... channel 6 (2437 Mhz 11g) bssid 00:1d:7e:00:00:00 >> > country US authmode WPA privacy OFF powersavemode CAM >> > powersavesleep 100 txpower 0 bmiss 7 mcastrate 6 mgmtrate 6 >> > scanvalid 60 protmode CTS roaming MANUAL bintval 0 >> >> Signal strength? >> What is displayed for ndis0 if you boot with verbose boot option. >> >> -- >> Paul B Mahol >> > > I boot(ed?) in verbose mode (option 5?) but nothing > interesting showed, just something like this: > > dmesg | egrep -ni "ndis|wlan" > 10:Preloaded elf module "/boot/kernel/ndis.ko" at 0xc1b0f31c. > 11:Preloaded elf module "/boot/kernel/if_ndis.ko" at 0xc1b0f3c8. > 103:wlan: <802.11 Link Layer> > 472:ndis0: <Broadcom 4321AG 802.11a/b/g/draft-n Wi-Fi Adapter> mem > 0xb6000000-0xb6003fff,0xd0200000-0xd02fffff at device 0.0 on pci3 > 473:ndis0: Reserved 0x4000 bytes for rid 0x10 type 3 at 0xb6000000 > 474:ndis0: Reserved 0x100000 bytes for rid 0x18 type 3 at 0xd0200000 > 480:ndis0: [MPSAFE] > 481:ndis0: [ITHREAD] > 482:ndis0: NDIS API version: 5.1 > 483:ndis0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps > 484:ndis0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps > 485:ndis0: 11g rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps > 794:wlan0: bpf attached > 795:wlan0: Ethernet address: 00:1a:73:xx:xx:xx > > > -- > [============================] > [En muchos lugares, tomar fotos es visto como] > [una costumbre vil y reprensible ] > [============================] > -- [============================] [En muchos lugares, tomar fotos es visto como] [una costumbre vil y reprensible ] [============================]
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?ed5c0bbe0912281657i4486a437p43497560bdd17a8b>