Date: Sun, 22 Apr 2001 23:04:44 -0700 From: Randy Bush <randy@psg.com> To: Sean Eric Fagan <sef@kithrup.com> Cc: mobile@freebsd.org Subject: Re: 4.3 and the HP OmniBook 6000 Message-ID: <E14rZSm-000HqP-00@rip.psg.com> References: <200104222335.QAA28358.kithrup.freebsd.mobile@kithrup.com> <200104230600.XAA02402@kithrup.com>
next in thread | previous in thread | raw e-mail | index | archive | help
> Now I'm trying to figure out the PCMCIA slots. They're in polling mode,
> but only sometimes work -- the first card I plugged in (a compact flash
> card) hung the system.
whoops! same story on a dell latitude c600. lockup city with an orinoco
gold 802.11 card that worked fine in a previous box with 4.2-stable. dmesg
appended.
randy
---
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.3-STABLE #0: Sun Apr 22 16:05:46 PDT 2001
root@roam2.psg.com:/usr/obj/usr/src/sys/ROAM
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (847.40-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x686 Stepping = 6
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 268353536 (262064K bytes)
avail memory = 258125824 (252076K bytes)
Preloaded elf kernel "kernel" at 0xc032b000.
Pentium Pro MTRR support enabled
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <ATI model 4c46 graphics accelerator> at 0.0 irq 11
pcic-pci0: <TI PCI-1420 PCI-CardBus Bridge> irq 11 at device 3.0 on pci0
pcic-pci0: TI12XX PCI Config Reg: [ring enable][speaker enable][FUNC pci int + CSC serial isa irq]
pcic-pci1: <TI PCI-1420 PCI-CardBus Bridge> irq 11 at device 3.1 on pci0
pcic-pci1: TI12XX PCI Config Reg: [ring enable][speaker enable][FUNC pci int + CSC serial isa irq]
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0x860-0x86f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xdce0-0xdcff irq 11 at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
chip1: <Intel 82371AB Power management controller> port 0x840-0x84f at device 7.3 on pci0
pci0: <unknown card> (vendor=0x125d, dev=0x1998) at 8.0 irq 5
xl0: <3Com 3c556 Fast Etherlink XL> port 0xd400-0xd4ff mem 0xfbffd800-0xfbffd87f,0xfbffdc00-0xfbffdc7f irq 11 at device 16.0 on pci0
xl0: Ethernet address: 00:01:03:84:67:74
miibus0: <MII bus> on xl0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci0: <unknown card> (vendor=0x10b7, dev=0x1007) at 16.1 irq 11
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
pcic0: <VLSI 82C146> at port 0x3e0 iomem 0xd0000 on isa0
pcic0: Polling mode
pccard0: <PC Card bus -- kludge version> on pcic0
pccard1: <PC Card bus -- kludge version> on pcic0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
IP Filter: v3.4.16 initialized. Default = block all, Logging = enabled
ata1-slave: ata_command: timeout waiting for intr
ata1-slave: identify failed
ad0: 19077MB <IBM-DJSA-220> [38760/16/63] at ata0-master UDMA33
acd0: DVD-ROM <LG DVD-ROM DRN-8080B> at ata1-master using PIO4
Mounting root from ufs:/dev/ad0s3a
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?E14rZSm-000HqP-00>