Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 4 Dec 2000 18:22:43 +0100
From:      Gunnar Flygt <gunnar@pluto.sr.se>
To:        "Sean O'Connell" <sean@stat.Duke.EDU>
Cc:        freebsd-mobile@freebsd.org
Subject:   Re: Toshiba Tecra 8100
Message-ID:  <20001204182243.A69989@sr.se>
In-Reply-To: <20001204120607.I21251@stat.Duke.EDU>; from sean@stat.Duke.EDU on Mon, Dec 04, 2000 at 12:06:07PM -0500
References:  <20001204172327.A68711@sr.se> <20001204113421.E21251@stat.Duke.EDU> <20001204174025.A69093@sr.se> <20001204114630.H21251@stat.Duke.EDU> <20001204175628.A69425@sr.se> <20001204120607.I21251@stat.Duke.EDU>

next in thread | previous in thread | raw e-mail | index | archive | help
On Mon, Dec 04, 2000 at 12:06:07PM -0500, Sean O'Connell wrote:
> Gunnar Flygt stated:
> : > 
> : > This could also be an irq conflict.  What if you break into the
> : > userconfig option and change the pcic0 irq from 10 to 0 .. to
> : > put the pcic in polling mode.  A lot of the problems with sysinstall
> : > and pccard irq issues have been helped out since 4.1 was released.
> : 
> : OK! I've been installing 4.1-R on a lot of laptops, since this code was
> : SO much better than the old one on pre4, so I thought it would run like
> : a charm :) I use to set it to 0xd4000 for memory and IRQ 11. Has worked
> : with a buncg of different laptops, old Toshiba, IBM 770E, Dell Latitude
> : and others, but not so this time. Maybe I just have to get all the parts
> : of 4.2-RELEASE, and give it a try.

Did a quick one with the 4.2-floppies, but with no luck.
> 
> You might also want to look in the BIOS on this puppy.  Things to look
> for would be:
> 
> PNP OS = YES                ===> set to NO

Hmmm, forgot this one. I'll try again tomorrow.

> Supported OS = Win9x/Win2k  ===> set to Other
> 
> I think Toshiba has an option either from within Windoze or the BIOS
> to put the pcic in so-called "legacy mode" .. I think this is what we
> need with FreeBSD until NEWCARD makes its debut :)

OK! I'll check out.
> 
> : > You could try installing 4.2-R using
> : > 
> : > ftp://ftp.se.freebsd.org/pub/FreeBSD/releases/i386/4.2-RELEASE/
> : 
> : Sorry, I'm behind a firewall, but I'll try the floppies to see if the
> : card is properly detected. Thanks for the help so far.
> 
> Hmmm... sysinstall ought to work with passive ftp.

Yeah, but it's quite messy to get outside of our firewall. I'll try
though, if the card initializes. :)
> 
> S
> -- 
> 1--------01---------01--------01--------01--------01--------01--------0
> Sean O'Connell                                       sean@stat.Duke.EDU

-- 
                           __o
regards, Gunnar       ---_ \<,_
email: flygt@sr.se ---- (_)/ (_)

                                o      _     _         _
                        _o     /\_   _ \\o  (_)\__/o  (_)
                      _< \_   _>(_) (_)/<_    \_| \   _|/' \/
                     (_)>(_) (_)        (_)   (_)    (_)'  _\o_



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20001204182243.A69989>