Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 27 Jun 2008 16:40:03 -0700
From:      "Kip Macy" <kip.macy@gmail.com>
To:        martes@mgwigglesworth.com
Cc:        freebsd-hackers@freebsd.org
Subject:   Re: Problems with ieee80211 dependencies...
Message-ID:  <b1fa29170806271640n73404ades8befee5da4cb0e21@mail.gmail.com>
In-Reply-To: <1214609369.15425.19.camel@devstation>
References:  <1214609369.15425.19.camel@devstation>

next in thread | previous in thread | raw e-mail | index | archive | help
Nothing jumps out at me, can you send the output of the build failure?

-Kip

On Fri, Jun 27, 2008 at 4:29 PM, Martes Wigglesworth
<martes@mgwigglesworth.com> wrote:
> I am having a hard time compiling a new kernel when I remove the
> wireless aspects of the config file.  I have removed all options/devices
> that seem to still require ieee80211 however, I still find that the
> network section of the compile do not work. I.E. that is where the
> compile stops, and indicates that an unknown reference to ieee80211
> functions...
>
> What in the GENERIC config file requires ieee80211? I have included my
> config file below:
>
> cpu             I686_CPU
> ident           DATASERVER
>
> # To statically compile in device wiring instead of /boot/device.hints
> #hints          "GENERIC.hints"         # Default places to look for
> devices.
>
> makeoptions     DEBUG=-g                # Build kernel with gdb(1)
>
> options         SCHED_ULE               # ULE scheduler
> options         PREEMPTION              # Enable kernel thread
> preemption
> options         INET                    # InterNETworking
> options         INET6                   # IPv6 communications protocols
> options         SCTP                    # Stream Control Transmission
> options         FFS                     # Berkeley Fast Filesystem
> options         SOFTUPDATES             # Enable FFS soft updates
> options         UFS_ACL                 # Support for access control
> options         UFS_DIRHASH             # Improve performance on big
> options         UFS_GJOURNAL            #
> options         MD_ROOT                 # MD is a potential root device
> options         PROCFS                  # Process filesystem
> options         PSEUDOFS                # Pseudo-filesystem framework
> options         GEOM_PART_GPT           # GUID Partition Tables.
> options         GEOM_LABEL              # Provides labelization
> options         COMPAT_43TTY
> options         SCSI_DELAY=5000
> options         KTRACE                  # ktrace(1) support
> options         STACK                   # stack(9) support
> options         SYSVSHM                 # SYSV-style shared memory
> options         SYSVMSG                 # SYSV-style message queues
> options         SYSVSEM                 # SYSV-style semaphores
> options         _KPOSIX_PRIORITY_SCHEDULING
> options         KBD_INSTALL_CDEV        # install a CDEV entry in /dev
> options         ADAPTIVE_GIANT          # Giant mutex is adaptive.
> options         STOP_NMI
> options         AUDIT                   # Security event auditing
>
> # To make an SMP kernel, the next two lines are needed
>
> # CPU frequency control
> device          cpufreq
>
> # Bus support.
> device          eisa
> device          pci
>
> # Floppy drives
> device          fdc
>
> # ATA and ATAPI devices
> device          ata
> device          atadisk         # ATA disk drives
> device          ataraid         # ATA RAID drives
> device          atapicam        # ATAPI emulation?
> device          atapicd         # ATAPI CDROM drives
> device          atapifd         # ATAPI floppy drives
> device          atapist         # ATAPI tape drives
> options         ATA_STATIC_ID   # Static device numbering
>
> # SCSI Controllers
> device          ahb             # EISA AHA1742 family
> device          ahc             # AHA2940 and onboard AIC7xxx devices
> options         AHC_REG_PRETTY_PRINT    # Print register bitfields in
> debug
>                                        # output.  Adds ~128k to driver.
> device          ahd
> options         AHD_REG_PRETTY_PRINT
>                                        # output.  Adds ~215k to driver.
> device          amd             # AMD 53C974 (Tekram DC-390(T))
> device          hptiop          # Highpoint RocketRaid 3xxx series
> device          isp             # Qlogic family
> #device         ispfw
> device          mpt             # LSI-Logic MPT-Fusion
> #device         ncr             # NCR/Symbios Logic
> device          sym             # NCR/Symbios Logic
> device          trm             # Tekram DC395U/UW/F DC315U adapters
>
> device          adv             # Advansys SCSI adapters
> device          adw             # Advansys wide SCSI adapters
> device          aha             # Adaptec 154x SCSI adapters
> device          aic             # Adaptec 15[012]x SCSI adapters
> device          bt              # Buslogic/Mylex MultiMaster SCSI
> adapters
>
> device          ncv             # NCR 53C500
> device          nsp             # Workbit Ninja SCSI-3
> device          stg             # TMC 18C30/18C50
>
> # SCSI peripherals
> device          scbus           # SCSI bus (required for SCSI)
> device          ch              # SCSI media changers
> device          da              # Direct Access (disks)
> device          sa              # Sequential Access (tape etc)
> device          cd              # CD
> device          pass            # Passthrough device (direct SCSI
> access)
> device          ses             # SCSI Environmental Services
>
> # RAID controllers interfaced to the SCSI subsystem
>
> # RAID controllers
>
> # atkbdc0 controls both the keyboard and the PS/2 mouse
> device          atkbdc          # AT keyboard controller
> device          atkbd           # AT keyboard
> device          psm             # PS/2 mouse
>
> device          kbdmux          # keyboard multiplexer
>
> device          vga             # VGA video card driver
>
>
> # syscons is the default console driver, resembling an SCO console
> device          sc
>
> device          agp             # support several AGP chipsets
>
> # Add suspend/resume support for the i8254.
> device          pmtimer
>
> # PCCARD (PCMCIA) support
> # PCMCIA and cardbus bridge support
>
> # Serial (COM) ports
> device          sio             # 8250, 16[45]50 based serial ports
> device          uart            # Generic UART driver
>
> # Parallel port
> device          ppc
> device          ppbus           # Parallel port bus (required)
> device          lpt             # Printer
> device          plip            # TCP/IP over parallel
> device          ppi             # Parallel port interface device
> #device         vpo             # Requires scbus and da
>
> # If you've got a "dumb" serial or parallel PCI card that is
> # supported by the puc(4) glue driver, uncomment the following
> # line to enable it (connects to sio, uart and/or ppc drivers):
> #device         puc
>
> # PCI Ethernet NICs.
>
> # PCI Ethernet NICs that use the common MII bus controller code.
> device          miibus          # MII bus support
> device          dc              # DEC/Intel 21143 and various workalikes
> device          fxp             # Intel EtherExpress PRO/100B
> device          xl              # 3Com 3c90x
>
> # 'device ed' requires 'device miibus'
>
> # Wireless NIC cards
>
> # Pseudo devices.
> device          loop            # Network loopback
> device          sl              # Kernel SLIP
> device          ppp             # Kernel PPP
> device          tun             # Packet tunnel.
> device          pty             # Pseudo-ttys (telnet etc)
> device          md              # Memory "disks"
> device          gif             # IPv6 and IPv4 tunneling
> device          faith           # IPv6-to-IPv4 relaying (translation)
> device          firmware        # firmware assist module
>
> # The `bpf' device enables the Berkeley Packet Filter.
> # Be aware of the administrative consequences of enabling this!
> # Note that 'bpf' is required for DHCP.
> device          bpf             # Berkeley packet filter
>
> # USB support
> device          uhci            # UHCI PCI->USB interface
> device          ohci            # OHCI PCI->USB interface
> device          ehci            # EHCI PCI->USB interface (USB 2.0)
> device          usb             # USB Bus (required)
> #device         udbp            # USB Double Bulk Pipe devices
> device          ugen            # Generic
> device          uhid            # "Human Interface Devices"
> device          ukbd            # Keyboard
> device          ulpt            # Printer
> device          umass           # Disks/Mass storage - Requires scbus
> and da
> device          ums             # Mouse
> device          urio            # Diamond Rio 500 MP3 player
> device          uscanner        # Scanners
> # USB Serial devices
> device          ucom            # Generic com ttys
> device          uark            # Technologies ARK3116 based serial
> device          ubsa            # Belkin F5U103 and compatible serial
> device          ubser           # BWCT console serial adapters
> device          uftdi           # For FTDI usb serial adapters
> device          uipaq           # Some WinCE based devices
> device          uplcom          # Prolific PL-2303 serial adapters
> device          uslcom          # SI Labs CP2101/CP2102 serial adapters
> device          uvisor          # Visor and Palm devices
> device          uvscom          # USB serial support for DDI pocket's
> PHS
> # USB Ethernet, requires miibus
>
> #--------------------------Firewall-Options---------------------------------#
> options         IPFIREWALL
> options         IPFIREWALL_DEFAULT_TO_ACCEPT
> options         IPFIREWALL_VERBOSE
> options         DUMMYNET
>
>
>
> _______________________________________________
> freebsd-hackers@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-hackers
> To unsubscribe, send any mail to "freebsd-hackers-unsubscribe@freebsd.org"
>



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?b1fa29170806271640n73404ades8befee5da4cb0e21>