Date: Thu, 06 Mar 2008 23:40:26 -0500 From: "Brian A. Seklecki (Mobile)" <bseklecki@collaborativefusion.com> To: freebsd-hardware@freebsd.org Cc: linux-poweredge <linux-poweredge@dell.com> Subject: Re: PowerEdge 860 (RELENG_6_3 AMD64 + SMP + DRAC4) Message-ID: <1204864827.3759.5.camel@new-host> In-Reply-To: <1199900526.5046.132.camel@soundwave.ws.pitbpa0.priv.collaborativefusion.com> References: <1199900526.5046.132.camel@soundwave.ws.pitbpa0.priv.collaborativefusion.com>
next in thread | previous in thread | raw e-mail | index | archive | help
The SMP on kernel fails to load on AMD64 6.3 SMP kernel on the PowerEdge 860. 6.2/i386 SMP was solid on the 850. The GENERIC kernel on 6.3 doesn't exhibit these errors, so it could be a threading/locking issue. http://digitalfreaks.org/~lavalamp/63_amd64_SMPkern_drac4_errors.jpg http://digitalfreaks.org/~lavalamp/63_amd64_SMPkern_drac4_errors_0.jpg ~BAS On Wed, 2008-01-09 at 12:42 -0500, Brian A. Seklecki wrote: > [Sorry if this is a resend to some -- I do not see that it made it > through the first time --- possibly spam filtered due to a DNS problem > with my personal domain.] > > -- > > Hi all: > > There are scattered reports in late 2006 / early 2007 of success using > the PE 860 w/ the SAS RAID, but not w/o the RAID (normally paired with a > non-Xeon). > > Would anyone be willing to share some dmesg(8) output? W/ or w/o the > RAID PERC SAS5iR mfi(4)? RELENG_6 or RELENG_7? Post your dmesg(8) to > dmesgd at NYCBUG? > > Here's an 850 w/o RAID: > http://www.nycbug.org/?NAV=dmesgd;f_dmesg=;f_bsd=;f_nick=;f_descr=poweredge;dmesgid=1724#1724 > > I'm curious how far the 860 is from the 850? > > Presumably they replaced with bge(4) with bce(4) (They offer both add on > "BC NetXtreme II 5708 1-Port" as well as "NetXtreme 5721") and also > replaced ICH7 with ICH8 or ICH9, but I'd like to check with other > satisfied customers. > > An OpenBSD dmesg(8) suggests "Intel 82801GB IDE" > http://archives.neohapsis.com/archives/openbsd/2007-02/0571.html > ...But that's in a model with a SAS5iR installed where the optical disk > is attache. > > The IDE controller may be different with no RAID. > > The lower-end 850 w/ the Core2 or genuine P4 non-Xeon is essentially > desktop-class hardware, so I don't imagine anything too exotic. > > TIA, > ~BAS IMPORTANT: This message contains confidential information and is intended only for the individual named. If the reader of this message is not an intended recipient (or the individual responsible for the delivery of this message to an intended recipient), please be advised that any re-use, dissemination, distribution or copying of this message is prohibited. Please notify the sender immediately by e-mail if you have received this e-mail by mistake and delete this e-mail from your system.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1204864827.3759.5.camel>