Date: Wed, 19 Feb 2003 20:47:24 -0500 (EST) From: Andrew Gallatin <gallatin@cs.duke.edu> To: Dag-Erling Smorgrav <des@ofug.org> Cc: alpha@FreeBSD.ORG, current@FreeBSD.ORG Subject: Re: top-of-tree alpha kernel panics during boot Message-ID: <15956.13228.528898.580885@grasshopper.cs.duke.edu> In-Reply-To: <xzp8ywcvyz3.fsf@flood.ping.uio.no> References: <xzpn0l0v119.fsf@flood.ping.uio.no> <xzpk7fz58r0.fsf@flood.ping.uio.no> <xzpfzqn57pi.fsf@flood.ping.uio.no> <15952.60850.445423.454870@grasshopper.cs.duke.edu> <xzp7kbz571q.fsf@flood.ping.uio.no> <15952.61478.809737.101419@grasshopper.cs.duke.edu> <xzplm0e4sui.fsf@flood.ping.uio.no> <15955.48613.835455.648469@grasshopper.cs.duke.edu> <xzp8ywcvyz3.fsf@flood.ping.uio.no>
next in thread | previous in thread | raw e-mail | index | archive | help
Dag-Erling Smorgrav writes:
> #options CD9660 #kld
Do you preload any/all of the things you've marked as klds?
I've tried to duplicate your crash on my xp1000. I've used your
kernel config file. I've reduced my memory size to 254MB.
I've got roughly similar hardware (w/the exception of the chipset and
cpu). The only thing I've not done is to preload any klds.
I don't doubt there's a problem, but I'm having a hell of a time
finding it :-(
Drew
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #2: Wed Feb 19 20:34:33 EST 2003
gallatin@monet:/usr/tmp/sys/alpha/compile/DES
Preloaded elf kernel "/kernel.test" at 0xfffffc0000762000.
ST6600
COMPAQ Professional Workstation XP1000, 500MHz
8192 byte page size, 1 processor.
CPU: EV6 (21264) major=8 minor=3 extensions=0x303<BWX,FIX,MVI,PRECISE>
OSF PAL rev: 0x1001600020153
real memory = 266338304 (254 MB)
avail memory = 251936768 (240 MB)
tsunami0: <21271 Core Logic chipset>
pcib0: <21271 PCI host bus adapter> on tsunami0
pci0: <PCI bus> on pcib0
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Cypress 82C693 ATA controller> port 0x10000-0x1000f,0x3f4-0x3f7,0x1f0-0x1f7 irq 238 at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: interrupting at ISA irq 14
ata1: at 0x170 irq 15 on atapci0
ata1: interrupting at ISA irq 15
atapci1: <Cypress 82C693 ATA controller> port 0x374-0x377,0x170-0x177 mem 0x1080000-0x108ffff irq 239 at device 7.2 on pci0
atapci1: Busmastering DMA not configured
ohci0: <OHCI (generic) USB controller> mem 0x1090000-0x1090fff irq 234 at device 7.3 on pci0
ohci0: interrupting at ISA irq 10
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (0x1080) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <old, non-VGA display device> at device 13.0 (no driver attached)
pcib1: <21271 PCI host bus adapter> on tsunami0
pci1: <PCI bus> on pcib1
dc0: <Intel 21143 10/100BaseTX> port 0x10000-0x1007f mem 0x1051000-0x10513ff irq 45 at device 3.0 on pci1
dc0: Ethernet address: 00:00:f8:71:ae:00
miibus0: <MII bus> on dc0
dcphy0: <Intel 21143 NWAY media interface> on miibus0
dcphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
dc0: interrupting at TSUNAMI irq 45
isp0: <Qlogic ISP 1020/1040 PCI SCSI Adapter> port 0x1000-0x10ff mem 0x1050000-0x1050fff irq 47 at device 6.0 on pci1
isp0: interrupting at TSUNAMI irq 47
pcib2: <PCI-PCI bridge> at device 8.0 on pci1
pci2: <PCI bus> on pcib2
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd0: interrupting at ISA irq 1
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: interrupting at ISA irq 6
mcclock0: <MC146818A real time clock> at port 0x70-0x71 on isa0
ppc0: <Parallel port> at port 0x3bc-0x3c3 irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
lpt0: <Printer> on ppbus0
lpt0: Polled port
ppi0: <Parallel I/O> on ppbus0
ppc0: interrupting at ISA irq 7
sio0 at port 0x3f8-0x3ff irq 4 on isa0
sio0: type 16550A, console
sio0: interrupting at ISA irq 4
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio1: interrupting at ISA irq 3
sbc0: <ESS ES1888> at port 0x220-0x22f irq 5 drq 1 on isa0
sbc0: interrupting at ISA irq 5
pcm0: <ESS 18xx DSP> on sbc0
Timecounter "i8254" frequency 1193182 Hz
Timecounter "alpha" frequency 500003025 Hz
Timecounters tick every 0.976 msec
ad0: 9787MB <QUANTUM FIREBALL CX10.2A> [19885/16/63] at ata0-slave WDMA2
acd0: CDROM <TOSHIBA CD-ROM XM-6302B> at ata0-master PIO4
Waiting 2 seconds for SCSI devices to settle
da0 at isp0 bus 0 target 0 lun 0
da0: <DEC RZ2CD-KS (C) DEC 0306> Fixed Direct Access SCSI-2 device
da0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled
da0: 4091MB (8380080 512 byte sectors: 255H 63S/T 521C)
da1 at isp0 bus 0 target 1 lun 0
da1: <SEAGATE ST39140W 1498> Fixed Direct Access SCSI-2 device
da1: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled
da1: 8683MB (17783240 512 byte sectors: 255H 63S/T 1106C)
da2 at isp0 bus 0 target 2 lun 0
da2: <DEC RZ2DD-KS (C) DEC 0306> Fixed Direct Access SCSI-2 device
da2: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled
da2: 8678MB (17773524 512 byte sectors: 255H 63S/T 1106C)
Mounting root from ufs:/dev/da1a
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-alpha" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?15956.13228.528898.580885>