Skip site navigation (1)Skip section navigation (2)
Date:      12 Aug 2003 18:37:37 +1000
From:      Mark Sergeant <msergeant@snsonline.net>
To:        freebsd-current@freebsd.org
Subject:   Problem with dhclient & wi0 on resume.
Message-ID:  <1060677457.1191.4.camel@xyzzy.wireless.snsonline.net>

next in thread | raw e-mail | index | archive | help
I've got a toshiba portege 4000 with inbuilt wi0 wireless card. On
resume dhclient kicks off straight away which then breaks as the card
isn't loaded as yet. Is there anyway to specify a sleep value for
dhclient on resume from suspend ? I'm running current from today, I
should note I'm also seeing a bunch of wi0 bad_alloc messages as well
with this card. It gets quite annoying to have to restart dhclient
everytime I resume.

The dmesg info is ...

wi0: detached
ata0: resetting devices ..
done
ata1: resetting devices ..
done
wakeup from sleeping state (slept 00:00:08)
wi0: <TOSHIBA Wireless LAN Card> at port 0x100-0x13f irq 11 function 0
config 1 on pccard0
wi0: 802.11 address: 00:02:2d:24:ec:d6
wi0: using Lucent Embedded WaveLAN/IEEE
wi0: Lucent Firmware: Station (6.14.1)
wi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
wi0: bad alloc 62b != 100, cur 0 nxt 0
wi0: bad alloc 451 != 100, cur 0 nxt 0
wi0: bad alloc 345 != 100, cur 0 nxt 0
wi0: bad alloc 298 != 100, cur 0 nxt 0

the log from /var/log/messages is...

Aug 12 18:27:13 xyzzy kernel: wi0: detached
Aug 12 18:27:13 xyzzy kernel: ata0: resetting devices ..
Aug 12 18:27:13 xyzzy kernel: done
Aug 12 18:27:13 xyzzy kernel: ata1: resetting devices ..
Aug 12 18:27:13 xyzzy kernel: done
Aug 12 18:27:13 xyzzy kernel: wakeup from sleeping state (slept
00:00:08)
Aug 12 18:27:13 xyzzy dhclient: send_packet: No route to host
Aug 12 18:27:13 xyzzy dhclient: receive_packet failed on wi0: No route
to host
Aug 12 18:27:15 xyzzy kernel: wi0: <TOSHIBA Wireless LAN Card> at port
0x100-0x13f irq 11 function 0 config 1 on pccard0
Aug 12 18:27:15 xyzzy kernel: wi0: 802.11 address: 00:02:2d:24:ec:d6
Aug 12 18:27:15 xyzzy kernel: wi0: using Lucent Embedded WaveLAN/IEEE
Aug 12 18:27:15 xyzzy kernel: wi0: Lucent Firmware: Station (6.14.1)
Aug 12 18:27:15 xyzzy kernel: wi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps


Cheers,

-- 
Mark Sergeant <msergeant@snsonline.net>
SNSOnline Technical Services



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1060677457.1191.4.camel>