Date: Thu, 19 Dec 2002 04:31:40 GMT From: Hans Huebner <hans@huebner.org> To: FreeBSD-gnats-submit@FreeBSD.org Cc: hans@huebner.org Subject: i386/46371: USB controller cannot be initialized on IBM Netfinity 4000R Message-ID: <200212190431.gBJ4Ve0C000328@enton.huebner.org>
next in thread | raw e-mail | index | archive | help
>Number: 46371 >Category: i386 >Synopsis: USB controller cannot be initialized on IBM Netfinity 4000R >Confidential: no >Severity: serious >Priority: medium >Responsible: freebsd-bugs >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Thu Dec 19 02:20:01 PST 2002 >Closed-Date: >Last-Modified: >Originator: Hans Huebner >Release: FreeBSD 4.7-RELEASE i386 >Organization: >Environment: System: FreeBSD enton.huebner.org 4.7-RELEASE FreeBSD 4.7-RELEASE #0: Wed Oct 9 15:08:34 GMT 2002 root@builder.freebsdmall.com:/usr/obj/usr/src/sys/GENERIC i386 IBM Netfinity 4000R server, Intel GX chipset, one CPU. >Description: The USB controller cannot be initialized as the interrupt mechanism seems to fail (see attached dmesg output) >How-To-Repeat: Install FreeBSD-4.7 on an IBM Netfinity 4000R >Fix: --- dmesg.boot begins here --- Copyright (c) 1992-2002 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.7-RELEASE #0: Wed Oct 9 15:08:34 GMT 2002 root@builder.freebsdmall.com:/usr/obj/usr/src/sys/GENERIC Timecounter "i8254" frequency 1193182 Hz CPU: Pentium III/Pentium III Xeon/Celeron (645.66-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x681 Stepping = 1 Features=0x387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE> real memory = 268435456 (262144K bytes) avail memory = 256036864 (250036K bytes) Preloaded elf kernel "kernel" at 0xc050f000. Pentium Pro MTRR support enabled md0: Malloc disk npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Intel 82443GX host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 pcib2: <Intel 82443GX (440 GX) PCI-PCI (AGP) bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib2 pci1: <Chips & Technologies 69000 SVGA controller> at 0.0 isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 ATA33 controller> port 0xffa0-0xffaf at device 7.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x2000-0x201f at device 7.2 on pci0 pci_cfgintr: can't route an interrupt to 0:7 INTD uhci0: Could not allocate irq device_probe_and_attach: uhci0 attach returned 6 chip1: <Intel 82371AB Power management controller> port 0x440-0x44f at device 7.3 on pci0 fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x2040-0x207f mem 0xfea00000-0xfeafffff,0xfebff000-0xfebfffff irq 9 at device 17.0 on pci0 fxp0: Ethernet address 00:06:29:de:c0:18 inphy0: <i82555 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp1: <Intel Pro 10/100B/100+ Ethernet> port 0x2080-0x20bf mem 0xfe900000-0xfe9fffff,0xfebfe000-0xfebfefff irq 10 at device 18.0 on pci0 fxp1: Ethernet address 00:06:29:de:c0:17 inphy1: <i82555 10/100 media interface> on miibus1 inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto pcib3: <DEC 21152 PCI-PCI bridge> at device 20.0 on pci0 pci2: <PCI bus> on pcib3 pcib1: <Intel 82443GX host to AGP bridge> on motherboard pci3: <PCI bus> on pcib1 fdc0: ready for input in output fdc0: cmd 3 failed at out byte 1 of 3 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x100> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A, console sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/16 bytes threshold plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 ad0: 39083MB <Maxtor 94098U6> [79408/16/63] at ata0-master UDMA33 acd0: CDROM <CRN-8241B> at ata1-master PIO4 Mounting root from ufs:/dev/ad0s1a --- dmesg.boot ends here --- >Release-Note: >Audit-Trail: >Unformatted: To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-bugs" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200212190431.gBJ4Ve0C000328>