Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 22 Feb 2013 19:48:18 +0800
From:      Alie Tan <alie@affle.com>
To:        Tim Kientzle <tim@kientzle.com>
Cc:        "freebsd-arm@freebsd.org" <freebsd-arm@freebsd.org>
Subject:   Re: Unable to copy DTB into module directory
Message-ID:  <CANuCnH87A=XH2P%2BBQ=JFHuz0b92k82cO6bsPzFvRPy0qs=OnEw@mail.gmail.com>
In-Reply-To: <FC5D35F7-0057-4EDE-B0EB-36492476D929@kientzle.com>
References:  <CANuCnH_4dxzBfVjxgX2FOtVKYm9BM0ZwdeDvp5-xPX8c5ggzHA@mail.gmail.com> <3A8BA2BC-6707-4309-B6E3-5B15712ED67D@kientzle.com> <FC5D35F7-0057-4EDE-B0EB-36492476D929@kientzle.com>

next in thread | previous in thread | raw e-mail | index | archive | help
On Fri, Feb 22, 2013 at 2:17 PM, Tim Kientzle <tim@kientzle.com> wrote:

>
> On Feb 21, 2013, at 10:07 PM, Tim Kientzle wrote:
>
> > On Feb 21, 2013, at 9:50 PM, Alie Tan wrote:
> >>
> >> I just built RasPi image and keeps getting this message:
> >>
> >> "unable to copy DTB into module directory"
> >>
> >> then the raspi reboot again and again.
> >
> > Try backing out r247045 and see if that fixes
> > it for you.
> >
> > Also try breaking into the U-Boot prompt
> > and entering
>
> Sorry, left out some steps here.  (To clarify, this is a separate
> experiment to be done with an image that includes
> r247045).  The instructions should say:
>
Fyi, Reverting r247045 didn't help my proble :-(

>
>   1) Remove the "fdt addr 0x100" command from loader.rc
>
>   2) Early in boot, break to the U-Boot prompt (hit any key during the
> 3-second countdown)
>
>  3) Enter these two commands to U-Boot
>
>   U-Boot> fdt addr 0x100
>   U-Boot> run bootcmd
>
> This way, U-Boot will identify the FDT and ubldr will
> get it from U-Boot (instead of ubldr accessing it
> directly).
>
> Tim
>
>



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CANuCnH87A=XH2P%2BBQ=JFHuz0b92k82cO6bsPzFvRPy0qs=OnEw>