Date: 13 Feb 2006 10:35:12 -0500 From: Lowell Gilbert <freebsd-questions-local@be-well.ilk.org> To: Thiago Esteves <thiago_est@yahoo.com.br> Cc: freebsd-questions@freebsd.org Subject: Re: "#:Failed to force tx and rx idle state" Message-ID: <44ek27l1an.fsf@be-well.ilk.org> In-Reply-To: <20060212175318.30618.qmail@web30005.mail.mud.yahoo.com> References: <20060212175318.30618.qmail@web30005.mail.mud.yahoo.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Thiago Esteves <thiago_est@yahoo.com.br> writes: > --- Lowell Gilbert > <freebsd-questions-local@be-well.ilk.org> escreveu: > > Thiago Esteves <thiago_est@yahoo.com.br> writes: > > > > > Hi, I've had troubles with a ethernet adapter > > ...."dc".... It send the mensage ::: > > > > > > => dc0: Failed to force tx and rx idle > > state <= > > > > > > ::: What's it? > > > > It tried and failed to reset the MAC controller. > > What other symptoms are you seeing? > > > > I started the DHCP client but It doesn't obtain a IP > address. I tried to configure the IP address manually > but It daesn't function... I've never seen that from a dc(4) card except for a time where it turned out that the hardware had failed. There are a number of entries in the BUGS section of the dc manual; check those out and try to determine if they affect you. Also, try setting the media type and options explicitly to match whatever the card is connected to, and see if you can establish link.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?44ek27l1an.fsf>