Date: 18 Mar 2001 22:33:38 +0100 From: Dag-Erling Smorgrav <des@ofug.org> To: current@FreeBSD.ORG Cc: jhb@FreeBSD.ORG, jake@FreeBSD.ORG Subject: Re: Interesting backtrace... Message-ID: <xzpofuyiwy5.fsf@flood.ping.uio.no> In-Reply-To: Dag-Erling Smorgrav's message of "18 Mar 2001 16:41:03 %2B0100" References: <xzpwv9nf5kg.fsf@flood.ping.uio.no>
next in thread | previous in thread | raw e-mail | index | archive | help
Verbose boot log as requested.
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #63: Sun Mar 18 22:21:49 CET 2001
des@des.thinksec.com:/usr/src/sys/compile/DES
Calibrating clock(s) ... TSC clock: 350796186 Hz, i8254 clock: 1193186 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: AMD-K6(tm) 3D processor (350.80-MHz 586-class CPU)
Origin = "AuthenticAMD" Id = 0x58c Stepping = 12
Features=0x8021bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX>
AMD Features=0x80000800<SYSCALL,3DNow!>
Data TLB: 128 entries, 2-way associative
Instruction TLB: 64 entries, 1-way associative
L1 data cache: 32 kbytes, 32 bytes/line, 2 lines/tag, 2-way associative
L1 instruction cache: 32 kbytes, 32 bytes/line, 2 lines/tag, 2-way associative
Write Allocate Enable Limit: 192M bytes
Write Allocate 15-16M bytes: Enable
real memory = 201310208 (196592K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009ffff, 651264 bytes (159 pages)
0x003e7000 - 0x0bfbbfff, 196956160 bytes (48085 pages)
avail memory = 191610880 (187120K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00f9b80
bios32: Entry = 0xf0530 (c00f0530) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0x560
pnpbios: Found PnP BIOS data at 0xc00fcfb0
pnpbios: Entry = f0000:cfe0 Rev = 1.0
pnpbios: OEM ID cd041
Other BIOS signatures found:
Preloaded elf kernel "kernel" at 0xc03c1000.
null: <null device, zero device>
random: <entropy source>
mem: <memory & I/O>
K6-family MTRR support enabled (2 registers)
VESA: information block
56 45 53 41 00 02 a5 72 00 c0 01 00 00 00 22 00
00 01 80 00 03 01 ba 72 00 c0 c1 72 00 c0 ca 72
00 c0 00 01 01 01 02 01 03 01 05 01 07 01 08 01
09 01 0a 01 0b 01 0c 01 10 01 11 01 12 01 13 01
VESA: 25 mode(s) found
VESA: v2.0, 8192k memory, flags:0x1, mode table:0xc033fd82 (1000022)
VESA: Matrox Graphics Inc.
VESA: Matrox MGA-G200 00
Using $PIR table, 8 entries at 0xc00f0b40
apm0: <APM BIOS> on motherboard
apm0: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
i586_bzero() bandwidth = -1980152482 bytes/sec
bzero() bandwidth = 129299198 bytes/sec
pcib0: <AcerLabs M1541 (Aladdin-V) PCI host bridge> at pcibus 0 on motherboard
pci0: physical bus=0
map[10]: type 1, range 32, base e0000000, size 26, enabled
found-> vendor=0x10b9, dev=0x1541, revid=0x04
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
found-> vendor=0x10b9, dev=0x5243, revid=0x04
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
found-> vendor=0x10b9, dev=0x7101, revid=0x00
bus=0, slot=3, func=0
class=06-80-00, hdrtype=0x00, mfdev=0
found-> vendor=0x10b9, dev=0x1533, revid=0xc3
bus=0, slot=7, func=0
class=06-01-00, hdrtype=0x00, mfdev=0
map[10]: type 4, range 32, base 0000d800, size 6, enabled
found-> vendor=0x10b7, dev=0x9001, revid=0x00
bus=0, slot=11, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
intpin=a, irq=12
map[20]: type 4, range 32, base 0000d400, size 4, enabled
found-> vendor=0x10b9, dev=0x5229, revid=0xc1
bus=0, slot=15, func=0
class=01-01-8a, hdrtype=0x00, mfdev=0
intpin=a, irq=0
pci0: <PCI bus> on pcib0
agp0: <Ali M1541 host to AGP bridge> mem 0xe0000000-0xe3ffffff at device 0.0 on pci0
agp0: allocating GATT for aperture of size 64M
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xe000-0xdfff
pcib1: memory decode 0xdf000000-0xdfffffff
pcib1: prefetched decode 0xe6f00000-0xe7ffffff
pci1: physical bus=1
map[10]: type 3, range 32, base e7000000, size 24, enabled
map[14]: type 1, range 32, base df800000, size 14, enabled
map[18]: type 1, range 32, base df000000, size 23, enabled
found-> vendor=0x102b, dev=0x0521, revid=0x01
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
intpin=a, irq=11
powerspec 1 supports D0 D3 current D0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at 0.0 (no driver attached)
pci0: <bridge, PCI-unknown> at 3.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
xl0: <3Com 3c900-COMBO Etherlink XL> port 0xd800-0xd83f irq 12 at device 11.0 on pci0
xl0: Ethernet address: 00:60:08:cf:a8:e4
xl0: media options word: e138
xl0: found 10baseT
xl0: found AUI
xl0: found BNC
xl0: selecting 10baseT transceiver, half duplex
bpf: xl0 attached
atapci0: <AcerLabs Aladdin ATA33 controller> port 0xd400-0xd40f irq 0 at device 15.0 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xd400
ata0: mask=03 ostat0=50 ostat2=00
ata0-master: ATAPI probe 00 00
ata0-slave: ATAPI probe 00 00
ata0: mask=03 stat0=50 stat1=00
ata0-master: ATA probe 01 a5
ata0: devices=01
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xd408
ata1: mask=03 ostat0=50 ostat2=00
ata1-master: ATAPI probe 00 00
ata1-slave: ATAPI probe 14 eb
ata1: mask=03 stat0=50 stat1=00
ata1-master: ATA probe 01 a5
ata1: devices=09
ata1: at 0x170 irq 15 on atapci0
Trying Read_Port at 203
CTL0043: start dependant
CTL0043: adding irq mask 0x20
CTL0043: adding dma mask 0x2
CTL0043: adding dma mask 0x8
CTL0043: adding io range 0x220-0x22f, size=0x10, align=0x1
CTL0043: adding io range 0x330-0x331, size=0x2, align=0x1
CTL0043: adding io range 0x388-0x38b, size=0x4, align=0x1
CTL0043: start dependant
CTL0043: adding irq mask 0x6a0
CTL0043: adding dma mask 0xb
CTL0043: adding dma mask 0xb
CTL0043: adding io range 0x220-0x28f, size=0x10, align=0x20
CTL0043: adding io range 0x300-0x331, size=0x2, align=0x30
CTL0043: adding io range 0x388-0x38b, size=0x4, align=0x1
CTL0043: start dependant
CTL0043: adding irq mask 0x6a0
CTL0043: adding dma mask 0xb
CTL0043: adding dma mask 0xb
CTL0043: adding io range 0x220-0x28f, size=0x10, align=0x20
CTL0043: adding io range 0x300-0x331, size=0x2, align=0x30
CTL0043: start dependant
CTL0043: adding irq mask 0x6a0
CTL0043: adding dma mask 0xb
CTL0043: adding dma mask 0xb
CTL0043: adding io range 0x220-0x28f, size=0x10, align=0x20
CTL0043: start dependant
CTL0043: adding irq mask 0x6a0
CTL0043: adding dma mask 0xb
CTL0043: adding io range 0x220-0x28f, size=0x10, align=0x20
CTL0043: adding io range 0x300-0x331, size=0x2, align=0x10
CTL0043: adding io range 0x388-0x397, size=0x4, align=0x4
CTL0043: start dependant
CTL0043: adding irq mask 0x6a0
CTL0043: adding dma mask 0xb
CTL0043: adding io range 0x220-0x28f, size=0x10, align=0x20
CTL0043: end dependant
CTL7005: start dependant
CTL7005: adding io range 0x201-0x201, size=0x1, align=0x1
CTL7005: start dependant
CTL7005: adding io range 0x200-0x20f, size=0x1, align=0x1
CTL7005: end dependant
pnpbios: 14 devices, largest 114 bytes
PNP0401: adding dma mask 0x8
PNP0401: adding irq mask 0x80
PNP0401: adding io range 0x378-0x37f, size=0x8, align=0
PNP0401: adding io range 0x778-0x77f, size=0x8, align=0
PNP0401: end config
pnpbios: handle 1 device ID PNP0401 (0104d041)
PNP0501: adding irq mask 0x10
PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0
PNP0501: end config
pnpbios: handle 2 device ID PNP0501 (0105d041)
PNP0501: adding irq mask 0x8
PNP0501: adding io range 0x2f8-0x2ff, size=0x8, align=0
PNP0501: end config
pnpbios: handle 3 device ID PNP0501 (0105d041)
PNP0700: adding irq mask 0x40
PNP0700: adding dma mask 0x4
PNP0700: adding io range 0x3f2-0x3f5, size=0x4, align=0
PNP0700: end config
pnpbios: handle 6 device ID PNP0700 (0007d041)
PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000
PNP0c01: adding fixed memory32 range 0x100000-0xbffffff, size=0xbf00000
PNP0c01: adding fixed memory32 range 0xe8000-0xeffff, size=0x8000
PNP0c01: adding fixed memory32 range 0xf0000-0xf3fff, size=0x4000
PNP0c01: adding fixed memory32 range 0xf4000-0xf7fff, size=0x4000
PNP0c01: adding fixed memory32 range 0xf8000-0xfbfff, size=0x4000
PNP0c01: adding fixed memory32 range 0xfc000-0xfffff, size=0x4000
PNP0c01: adding fixed memory32 range 0xfffe0000-0xffffffff, size=0x20000
PNP0c01: end config
pnpbios: handle 8 device ID PNP0c01 (010cd041)
PNP0000: adding irq mask 0x4
PNP0000: adding io range 0x20-0x21, size=0x2, align=0
PNP0000: adding io range 0xa0-0xa1, size=0x2, align=0
PNP0000: adding io range 0x4d0-0x4d1, size=0x2, align=0
PNP0000: end config
pnpbios: handle 9 device ID PNP0000 (0000d041)
PNP0100: adding irq mask 0x1
PNP0100: adding io range 0x40-0x43, size=0x4, align=0
PNP0100: end config
pnpbios: handle 10 device ID PNP0100 (0001d041)
PNP0b00: adding irq mask 0x100
PNP0b00: adding io range 0x70-0x71, size=0x2, align=0
PNP0b00: end config
pnpbios: handle 11 device ID PNP0b00 (000bd041)
PNP0303: adding irq mask 0x2
PNP0303: adding io range 0x60-0x60, size=0x1, align=0
PNP0303: adding io range 0x64-0x64, size=0x1, align=0
PNP0303: end config
pnpbios: handle 12 device ID PNP0303 (0303d041)
PNP0c04: adding irq mask 0x2000
PNP0c04: adding io range 0xf0-0xf0, size=0x1, align=0
PNP0c04: end config
pnpbios: handle 13 device ID PNP0c04 (040cd041)
PNP0200: adding dma mask 0x10
PNP0200: adding io range 0-0xf, size=0x10, align=0
PNP0200: adding io range 0x80-0x90, size=0x11, align=0
PNP0200: adding io range 0x94-0x9f, size=0xc, align=0
PNP0200: adding io range 0xc0-0xde, size=0x1f, align=0
PNP0200: end config
pnpbios: handle 14 device ID PNP0200 (0002d041)
PNP0800: adding io range 0x61-0x61, size=0x1, align=0x1
PNP0800: end config
pnpbios: handle 15 device ID PNP0800 (0008d041)
PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0
PNP0a03: end config
pnpbios: handle 16 device ID PNP0a03 (030ad041)
PNP0c02: adding io range 0x290-0x297, size=0x8, align=0
PNP0c02: adding io range 0x40b-0x40b, size=0x1, align=0
PNP0c02: adding io range 0x480-0x49f, size=0x20, align=0
PNP0c02: adding io range 0x4d6-0x4d6, size=0x1, align=0
PNP0c02: adding io range 0xec00-0xec3f, size=0x40, align=0
PNP0c02: adding io range 0xe800-0xe83f, size=0x40, align=0
PNP0c02: end config
pnpbios: handle 17 device ID PNP0c02 (020cd041)
sc-: sc0 already exists, using sc1 instead
vga-: vga0 already exists, using vga1 instead
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
ed0 at port 0x280-0x29f iomem 0xd8000 irq 5 on isa0
bpf: ed0 attached
ed0: address 00:20:18:64:9b:b6, type NE2000 (16 bit)
atkbd: the current kbd controller command byte 0067
atkbd: keyboard ID 0x41ab (2)
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: irq maps: 0x403 0x413 0x403 0x403
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x700ff
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc1: no video adapter is found.
sc1: <System console> failed to probe on isa0
vga1: <Generic ISA VGA> failed to probe on isa0
isa_probe_children: probing PnP devices
sbc0: <Creative ViBRA16X> at port 0x220-0x22f,0x300-0x301,0x388-0x38b irq 7 drq 0,1 on isa0
sbc0: setting card to irq 7, drq 0, 1
pcm0: <SB16 DSP 4.16 (ViBRA16X)> on sbc0
pcm: setmap 44e000, 1000; 0xcef02000 -> 44e000
pcm: setmap 44f000, 1000; 0xcef03000 -> 44f000
unknown: <Game> failed to probe at port 0x201 on isa0
unknown: <PNP0401> can't assign resources
unknown: <PNP0401> at port 0x378-0x37f,0x778-0x77f irq 7 on isa0
unknown: <PNP0501> can't assign resources
unknown: <PNP0501> at port 0x3f8-0x3ff on isa0
sio1: irq maps: 0x403 0x40b 0x403 0x403
sio1: <16550A-compatible COM port> at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
fdc0: <NEC 72065B or clone> at port 0x3f2-0x3f5,0x3f7 irq 6 drq 2 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 irq 1 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
psm0: current command byte:0067
psm0: failed to reset the aux device.
unknown: <PNP0800> failed to probe at port 0x61 on isa0
unknown: <PNP0c02> can't assign resources
unknown: <PNP0c02> at port 0x290-0x297 on isa0
BIOS Geometries:
0:03fffe3f 0..1023=1024 cylinders, 0..254=255 heads, 1..63=63 sectors
1:03fffe3f 0..1023=1024 cylinders, 0..254=255 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
bpf: lo0 attached
IP packet filtering initialized, divert disabled, rule-based forwarding disabled, default to deny, unlimited logging
Linux ELF exec handler installed
ad0: success setting UDMA2 on Aladdin chip
Creating DISK ad0
ad0: <IBM-DTTA-371010/T77OA73A> ATA-4 disk at ata0-master
ad0: 9641MB (19746720 sectors), 19590 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA33
ad0: piomode=4 dmamode=2 udmamode=2 cblid=0
ad0: 9641MB <IBM-DTTA-371010> [19590/16/63] at ata0-master UDMA33
ad1: DMA limited to UDMA33, non-ATA66 compliant cable
ad1: success setting UDMA2 on Aladdin chip
Creating DISK ad1
ad1: <FUJITSU MPD3091AH/DH-05-09> ATA-4 disk at ata1-master
ad1: 8711MB (17840696 sectors), 17699 C, 16 H, 63 S, 512 B
ad1: 16 secs/int, 1 depth queue, UDMA33
ad1: piomode=4 dmamode=2 udmamode=4 cblid=0
ad1: 8711MB <FUJITSU MPD3091AH> [17699/16/63] at ata1-master UDMA33
ata1-slave: piomode=3 dmamode=1 udmamode=-1 dmaflag=1
ata1-slave: timeout waiting for command=ef s=00 e=00
ata1-slave: failed setting PIO3 on generic chip
ata1-slave: using PIO mode set by BIOS
acd0: <Pioneer CD-ROM ATAPI Model DR-A10X 0100/E1.00A> CDROM drive at ata1 as slave
acd0: read 1722KB/s (1722KB/s), 128KB buffer, BIOSPIO
acd0: Reads: CD-R, CD-DA stream, packet
acd0: Writes:
acd0: Audio:play, 256 volume levels
acd0: Mechanism:ejectable trayacd0: Medium:no/blank disc inside, unlocked
Mounting root from ufs:/dev/ad0a
ad0s1: type 0xa5, start 0, end = 19746719, size 19746720 : OK
start_init: trying /sbin/init
ad1s1: type 0xa5, start 0, end = 17840695, size 17840696 : OK
DES
--
Dag-Erling Smorgrav - des@ofug.org
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?xzpofuyiwy5.fsf>