Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 27 Jun 2014 15:20:34 +0000 (UTC)
From:      John Baldwin <jhb@FreeBSD.org>
To:        src-committers@freebsd.org, svn-src-all@freebsd.org, svn-src-head@freebsd.org
Subject:   svn commit: r267959 - in head/usr.sbin: bhyve bhyveload
Message-ID:  <201406271520.s5RFKYUt037094@svn.freebsd.org>

next in thread | raw e-mail | index | archive | help
Author: jhb
Date: Fri Jun 27 15:20:34 2014
New Revision: 267959
URL: http://svnweb.freebsd.org/changeset/base/267959

Log:
  Sort command flags in usage output and the manpages.

Modified:
  head/usr.sbin/bhyve/bhyve.8
  head/usr.sbin/bhyve/bhyverun.c
  head/usr.sbin/bhyveload/bhyveload.8
  head/usr.sbin/bhyveload/bhyveload.c

Modified: head/usr.sbin/bhyve/bhyve.8
==============================================================================
--- head/usr.sbin/bhyve/bhyve.8	Fri Jun 27 14:42:13 2014	(r267958)
+++ head/usr.sbin/bhyve/bhyve.8	Fri Jun 27 15:20:34 2014	(r267959)
@@ -35,10 +35,10 @@
 .Op Fl abehwxACHPWY
 .Op Fl c Ar numcpus
 .Op Fl g Ar gdbport
+.Op Fl l Ar lpcdev Ns Op , Ns Ar conf
 .Op Fl m Ar size Ns Op Ar K|k|M|m|G|g|T|t
 .Op Fl p Ar vcpu:hostcpu
 .Op Fl s Ar slot,emulation Ns Op , Ns Ar conf
-.Op Fl l Ar lpcdev Ns Op , Ns Ar conf
 .Op Fl U Ar uuid
 .Ar vmname
 .Sh DESCRIPTION
@@ -78,9 +78,11 @@ Number of guest virtual CPUs.
 The default is 1 and the maximum is 16.
 .It Fl C
 Include guest memory in core file.
-.It Fl H
-Yield the virtual CPU thread when a HLT instruction is detected.
-If this option is not specified, virtual CPUs will use 100% of a host CPU.
+.It Fl e
+Force
+.Nm
+to exit when a guest issues an access to an I/O port that is not emulated.
+This is intended for debug purposes.
 .It Fl g Ar gdbport
 For
 .Fx
@@ -89,6 +91,26 @@ kernels compiled with
 allow a remote kernel kgdb to be relayed to the guest kernel gdb stub
 via a local IPv4 address and this port.
 This option will be deprecated in a future version.
+.It Fl h
+Print help message and exit.
+.It Fl H
+Yield the virtual CPU thread when a HLT instruction is detected.
+If this option is not specified, virtual CPUs will use 100% of a host CPU.
+.It Fl l Ar lpcdev Ns Op , Ns Ar conf
+Allow devices behind the LPC PCI-ISA bridge to be configured.
+The only supported devices are the TTY-class devices,
+.Li com1
+and
+.Li com2 .
+.It Fl m Ar size Ns Op Ar K|k|M|m|G|g|T|t
+Guest physical memory size in bytes.
+This must be the same size that was given to
+.Xr bhyveload 8 .
+.Pp
+The size argument may be suffixed with one of K, M, G or T (either upper
+or lower case) to indicate a multiple of kilobytes, megabytes, gigabytes,
+or terabytes.
+If no suffix is given, the value is assumed to be in megabytes.
 .It Fl p Ar vcpu:hostcpu
 Pin guest's virtual CPU
 .Em vcpu
@@ -96,9 +118,6 @@ to
 .Em hostcpu .
 .It Fl P
 Force the guest virtual CPU to exit when a PAUSE instruction is detected.
-.It Fl W
-Force virtio PCI device emulations to use MSI interrupts instead of MSI-X
-interrupts.
 .It Fl s Ar slot,emulation Ns Op , Ns Ar conf
 Configure a virtual PCI slot and function.
 .Pp
@@ -219,26 +238,6 @@ The host device must have been reserved 
 loader variable as described in
 .Xr vmm 4 .
 .El
-.It Fl l Ar lpcdev Ns Op , Ns Ar conf
-Allow devices behind the LPC PCI-ISA bridge to be configured.
-The only supported devices are the TTY-class devices,
-.Li com1
-and
-.Li com2 .
-.It Fl m Ar size Ns Op Ar K|k|M|m|G|g|T|t
-Guest physical memory size in bytes.
-This must be the same size that was given to
-.Xr bhyveload 8 .
-.Pp
-The size argument may be suffixed with one of K, M, G or T (either upper
-or lower case) to indicate a multiple of kilobytes, megabytes, gigabytes,
-or terabytes.
-If no suffix is given, the value is assumed to be in megabytes.
-.It Fl e
-Force
-.Nm
-to exit when a guest issues an access to an I/O port that is not emulated.
-This is intended for debug purposes.
 .It Fl U Ar uuid
 Set the universally unique identifier
 .Pq UUID
@@ -247,12 +246,13 @@ By default a UUID is generated from the 
 .Ar vmname .
 .It Fl w
 Ignore accesses to unimplemented Model Specific Registers (MSRs). This is intended for debug purposes.
+.It Fl W
+Force virtio PCI device emulations to use MSI interrupts instead of MSI-X
+interrupts.
 .It Fl x
 The guest's local APIC is configured in x2APIC mode.
 .It Fl Y
 Disable MPtable generation.
-.It Fl h
-Print help message and exit.
 .It Ar vmname
 Alphanumeric name of the guest.
 This should be the same as that created by

Modified: head/usr.sbin/bhyve/bhyverun.c
==============================================================================
--- head/usr.sbin/bhyve/bhyverun.c	Fri Jun 27 14:42:13 2014	(r267958)
+++ head/usr.sbin/bhyve/bhyverun.c	Fri Jun 27 15:20:34 2014	(r267959)
@@ -129,26 +129,26 @@ usage(int code)
 {
 
         fprintf(stderr,
-                "Usage: %s [-abehwxACHPWY] [-g <gdb port>] [-s <pci>] [-c vcpus]\n"
-		"       %*s [-p vcpu:hostcpu] [-m mem] [-l <lpc>] [-U uuid] <vm>\n"
+                "Usage: %s [-abehwxACHPWY] [-c vcpus] [-g <gdb port>] [-l <lpc>]\n"
+		"       %*s [-m mem] [-p vcpu:hostcpu] [-s <pci>] [-U uuid] <vm>\n"
 		"       -a: local apic is in xAPIC mode (deprecated)\n"
 		"       -A: create ACPI tables\n"
-		"       -g: gdb port\n"
 		"       -c: # cpus (default 1)\n"
 		"       -C: include guest memory in core file\n"
-		"       -p: pin 'vcpu' to 'hostcpu'\n"
-		"       -H: vmexit from the guest on hlt\n"
-		"       -P: vmexit from the guest on pause\n"
-		"       -W: force virtio to use single-vector MSI\n"
 		"       -e: exit on unhandled I/O access\n"
+		"       -g: gdb port\n"
 		"       -h: help\n"
-		"       -s: <slot,driver,configinfo> PCI slot config\n"
+		"       -H: vmexit from the guest on hlt\n"
 		"       -l: LPC device configuration\n"
 		"       -m: memory size in MB\n"
+		"       -p: pin 'vcpu' to 'hostcpu'\n"
+		"       -P: vmexit from the guest on pause\n"
+		"       -s: <slot,driver,configinfo> PCI slot config\n"
+		"       -U: uuid\n"
 		"       -w: ignore unimplemented MSRs\n"
+		"       -W: force virtio to use single-vector MSI\n"
 		"       -x: local apic is in x2APIC mode\n"
-		"       -Y: disable MPtable generation\n"
-		"       -U: uuid\n",
+		"       -Y: disable MPtable generation\n",
 		progname, (int)strlen(progname), "");
 
 	exit(code);

Modified: head/usr.sbin/bhyveload/bhyveload.8
==============================================================================
--- head/usr.sbin/bhyveload/bhyveload.8	Fri Jun 27 14:42:13 2014	(r267958)
+++ head/usr.sbin/bhyveload/bhyveload.8	Fri Jun 27 15:20:34 2014	(r267959)
@@ -35,11 +35,11 @@
 guest inside a bhyve virtual machine
 .Sh SYNOPSIS
 .Nm
-.Op Fl m Ar mem-size
+.Op Fl c Ar cons-dev
 .Op Fl d Ar disk-path
-.Op Fl h Ar host-path
 .Op Fl e Ar name=value
-.Op Fl c Ar cons-dev
+.Op Fl h Ar host-path
+.Op Fl m Ar mem-size
 .Ar vmname
 .Sh DESCRIPTION
 .Nm
@@ -62,6 +62,32 @@ and will be created if it does not alrea
 .Sh OPTIONS
 The following options are available:
 .Bl -tag -width indent
+.It Fl c Ar cons-dev
+.Ar cons-dev
+is a
+.Xr tty 4
+device to use for
+.Nm
+terminal I/O.
+.Pp
+The text string "stdio" is also accepted and selects the use of
+unbuffered standard I/O. This is the default value.
+.It Fl d Ar disk-path
+The
+.Ar disk-path
+is the pathname of the guest's boot disk image.
+.It Fl e Ar name=value
+Set the FreeBSD loader environment variable
+.Ar name
+to
+.Ar value .
+.Pp
+The option may be used more than once to set more than one environment
+variable.
+.It Fl h Ar host-path
+The
+.Ar host-path
+is the directory at the top of the guest's boot filesystem.
 .It Fl m Ar mem-size Xo
 .Sm off
 .Op Cm K | k | M | m | G | g | T | t
@@ -85,32 +111,6 @@ respectively.
 The default value of
 .Ar mem-size
 is 256M.
-.It Fl d Ar disk-path
-The
-.Ar disk-path
-is the pathname of the guest's boot disk image.
-.It Fl h Ar host-path
-The
-.Ar host-path
-is the directory at the top of the guest's boot filesystem.
-.It Fl e Ar name=value
-Set the FreeBSD loader environment variable
-.Ar name
-to
-.Ar value .
-.Pp
-The option may be used more than once to set more than one environment
-variable.
-.It Fl c Ar cons-dev
-.Ar cons-dev
-is a
-.Xr tty 4
-device to use for
-.Nm
-terminal I/O.
-.Pp
-The text string "stdio" is also accepted and selects the use of
-unbuffered standard I/O. This is the default value.
 .El
 .Sh EXAMPLES
 To create a virtual machine named

Modified: head/usr.sbin/bhyveload/bhyveload.c
==============================================================================
--- head/usr.sbin/bhyveload/bhyveload.c	Fri Jun 27 14:42:13 2014	(r267958)
+++ head/usr.sbin/bhyveload/bhyveload.c	Fri Jun 27 15:20:34 2014	(r267959)
@@ -629,8 +629,8 @@ usage(void)
 {
 
 	fprintf(stderr,
-	    "usage: %s [-m mem-size] [-d <disk-path>] [-h <host-path>]\n"
-	    "       %*s [-e <name=value>] [-c <console-device>] <vmname>\n",
+	    "usage: %s [-c <console-device>] [-d <disk-path>] [-e <name=value>]\n"
+	    "       %*s [-h <host-path>] [-m mem-size] <vmname>\n",
 	    progname,
 	    (int)strlen(progname), "");
 	exit(1);



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201406271520.s5RFKYUt037094>