Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 04 May 2010 21:01:39 +0200
From:      Pav Lucistnik <pav@FreeBSD.org>
To:        x11@FreeBSD.org
Subject:   [Fwd: xf86-input-elographics-1.2.3_3 failed on amd64 7]
Message-ID:  <1272999699.66046.66.camel@hood.oook.cz>

next in thread | raw e-mail | index | archive | help

--=-hlbVMuTbhEiE0QwdVXR8
Content-Type: text/plain; charset="ISO-8859-2"
Content-Transfer-Encoding: quoted-printable

-------- P=F8eposlan=E1 zpr=E1va --------
> Od: User Ports-amd64 <ports-amd64@FreeBSD.org>
> Komu: cvs@oook.cz, linimon@FreeBSD.org, itetcu@FreeBSD.org
> P=F8edm=ECt: xf86-input-elographics-1.2.3_3 failed on amd64 7
> Datum: Tue, 4 May 2010 01:14:59 GMT
>=20
> You can also find this build log at
>=20
>   http://pointyhat.FreeBSD.org/errorlogs/amd64-errorlogs/a.7.201005012203=
13/xf86-input-elographics-1.2.3_3.log
>=20
> building xf86-input-elographics-1.2.3_3 on gohan11.freebsd.org
> in directory /x/pkgbuild/7/20100501220313/chroot/2163
> building for: 7.2-STABLE amd64
> maintained by: x11@FreeBSD.org
> port directory: /usr/ports/x11-drivers/xf86-input-elographics
> Makefile ident: $FreeBSD: ports/x11-drivers/xf86-input-elographics/Makefi=
le,v 1.6 2010/02/07 15:25:23 rnoland Exp $
> build started at Tue May  4 01:13:21 UTC 2010
> FETCH_DEPENDS=3D
> PATCH_DEPENDS=3D
> EXTRACT_DEPENDS=3D
> BUILD_DEPENDS=3Dbison-2.4.1,1.tbz consolekit-0.4.1_2.tbz damageproto-1.2.=
0.tbz dbus-1.2.16_1.tbz dbus-glib-0.84.tbz dmidecode-2.10.tbz dri-7.4.4,2.t=
bz dri2proto-2.2.tbz eggdbus-0.6.tbz expat-2.0.1_1.tbz fixesproto-4.1.1.tbz=
 fontsproto-2.1.0.tbz freetype2-2.3.11.tbz gamin-0.1.10_3.tbz gettext-0.17_=
1.tbz gio-fam-backend-2.22.4.tbz glib-2.22.4.tbz gnome_subr-1.0.tbz gobject=
-introspection-0.6.7.tbz hal-0.5.13_14.tbz inputproto-2.0.tbz kbproto-1.0.4=
.tbz libGL-7.4.4.tbz libICE-1.0.6,1.tbz libSM-1.1.1,1.tbz libX11-1.3.3,1.tb=
z libXau-1.0.5.tbz libXaw-1.0.7,1.tbz libXdamage-1.1.2.tbz libXdmcp-1.0.3.t=
bz libXext-1.1.1,1.tbz libXfixes-4.0.4.tbz libXfont-1.4.0,1.tbz libXi-1.3,1=
.tbz libXinerama-1.1,1.tbz libXmu-1.0.5,1.tbz libXp-1.0.0,1.tbz libXpm-3.5.=
7.tbz libXt-1.0.7.tbz libXxf86misc-1.0.2.tbz libXxf86vm-1.1.0.tbz libdrm-2.=
4.12.tbz libffi-3.0.9.tbz libfontenc-1.0.5.tbz libiconv-1.13.1_1.tbz libpci=
access-0.11.0.tbz libpthread-stubs-0.3_3.tbz libvolume_id-0.81.1.tbz libxcb=
-1.5.tbz libxkbfile
>  -1.0.6.tbz libxkbui-1.0.2_1.tbz libxml2-2.7.6_2.tbz m4-1.4.14,1.tbz pcii=
ds-20091229.tbz pcre-8.02.tbz perl-5.10.1.tbz pixman-0.16.6.tbz pkg-config-=
0.23_1.tbz policykit-0.9_6.tbz polkit-0.96_1.tbz printproto-1.0.4.tbz pytho=
n26-2.6.4.tbz randrproto-1.3.1.tbz xextproto-7.1.1.tbz xf86miscproto-0.9.3.=
tbz xf86vidmodeproto-2.3.tbz xineramaproto-1.2.tbz xkeyboard-config-1.8.tbz=
 xorg-server-1.7.5,1.tbz xproto-7.0.16.tbz
> RUN_DEPENDS=3Dbison-2.4.1,1.tbz consolekit-0.4.1_2.tbz damageproto-1.2.0.=
tbz dbus-1.2.16_1.tbz dbus-glib-0.84.tbz dmidecode-2.10.tbz dri-7.4.4,2.tbz=
 dri2proto-2.2.tbz eggdbus-0.6.tbz expat-2.0.1_1.tbz fixesproto-4.1.1.tbz f=
ontsproto-2.1.0.tbz freetype2-2.3.11.tbz gamin-0.1.10_3.tbz gettext-0.17_1.=
tbz gio-fam-backend-2.22.4.tbz glib-2.22.4.tbz gnome_subr-1.0.tbz gobject-i=
ntrospection-0.6.7.tbz hal-0.5.13_14.tbz inputproto-2.0.tbz kbproto-1.0.4.t=
bz libGL-7.4.4.tbz libICE-1.0.6,1.tbz libSM-1.1.1,1.tbz libX11-1.3.3,1.tbz =
libXau-1.0.5.tbz libXaw-1.0.7,1.tbz libXdamage-1.1.2.tbz libXdmcp-1.0.3.tbz=
 libXext-1.1.1,1.tbz libXfixes-4.0.4.tbz libXfont-1.4.0,1.tbz libXi-1.3,1.t=
bz libXinerama-1.1,1.tbz libXmu-1.0.5,1.tbz libXp-1.0.0,1.tbz libXpm-3.5.7.=
tbz libXt-1.0.7.tbz libXxf86misc-1.0.2.tbz libXxf86vm-1.1.0.tbz libdrm-2.4.=
12.tbz libffi-3.0.9.tbz libfontenc-1.0.5.tbz libiconv-1.13.1_1.tbz libpciac=
cess-0.11.0.tbz libpthread-stubs-0.3_3.tbz libvolume_id-0.81.1.tbz libxcb-1=
.5.tbz libxkbfile-1
>  .0.6.tbz libxkbui-1.0.2_1.tbz libxml2-2.7.6_2.tbz m4-1.4.14,1.tbz pciids=
-20091229.tbz pcre-8.02.tbz perl-5.10.1.tbz pixman-0.16.6.tbz pkg-config-0.=
23_1.tbz policykit-0.9_6.tbz polkit-0.96_1.tbz printproto-1.0.4.tbz python2=
6-2.6.4.tbz xextproto-7.1.1.tbz xf86miscproto-0.9.3.tbz xf86vidmodeproto-2.=
3.tbz xineramaproto-1.2.tbz xkeyboard-config-1.8.tbz xorg-server-1.7.5,1.tb=
z xproto-7.0.16.tbz
> prefixes: LOCALBASE=3Dusr/local
> add_pkg
> =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
> =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D<phase 1: mak=
e checksum>=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
> =3D> xf86-input-elographics-1.2.3.tar.bz2 doesn't seem to exist in /tmp/d=
istfiles/xorg/driver.
> =3D> Attempting to fetch from ftp://ftp-master.freebsd.org/pub/FreeBSD/po=
rts/distfiles/xorg/driver/.
> xf86-input-elographics-1.2.3.tar.bz2                   245 kB  427 kBps
> =3D> MD5 Checksum OK for xorg/driver/xf86-input-elographics-1.2.3.tar.bz2=
.
> =3D> SHA256 Checksum OK for xorg/driver/xf86-input-elographics-1.2.3.tar.=
bz2.
> =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
> =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D<phase 2: mak=
e extract>=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
> add_pkg
> =3D=3D=3D>  Extracting for xf86-input-elographics-1.2.3_3
> =3D> MD5 Checksum OK for xorg/driver/xf86-input-elographics-1.2.3.tar.bz2=
.
> =3D> SHA256 Checksum OK for xorg/driver/xf86-input-elographics-1.2.3.tar.=
bz2.
> =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
> =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D<phase 3: mak=
e patch>=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
> add_pkg
> =3D=3D=3D>  Patching for xf86-input-elographics-1.2.3_3
> =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
> =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D<phase 4: mak=
e build>=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
> add_pkg bison-2.4.1,1.tbz consolekit-0.4.1_2.tbz damageproto-1.2.0.tbz db=
us-1.2.16_1.tbz dbus-glib-0.84.tbz dmidecode-2.10.tbz dri-7.4.4,2.tbz dri2p=
roto-2.2.tbz eggdbus-0.6.tbz expat-2.0.1_1.tbz fixesproto-4.1.1.tbz fontspr=
oto-2.1.0.tbz freetype2-2.3.11.tbz gamin-0.1.10_3.tbz gettext-0.17_1.tbz gi=
o-fam-backend-2.22.4.tbz glib-2.22.4.tbz gnome_subr-1.0.tbz gobject-introsp=
ection-0.6.7.tbz hal-0.5.13_14.tbz inputproto-2.0.tbz kbproto-1.0.4.tbz lib=
GL-7.4.4.tbz libICE-1.0.6,1.tbz libSM-1.1.1,1.tbz libX11-1.3.3,1.tbz libXau=
-1.0.5.tbz libXaw-1.0.7,1.tbz libXdamage-1.1.2.tbz libXdmcp-1.0.3.tbz libXe=
xt-1.1.1,1.tbz libXfixes-4.0.4.tbz libXfont-1.4.0,1.tbz libXi-1.3,1.tbz lib=
Xinerama-1.1,1.tbz libXmu-1.0.5,1.tbz libXp-1.0.0,1.tbz libXpm-3.5.7.tbz li=
bXt-1.0.7.tbz libXxf86misc-1.0.2.tbz libXxf86vm-1.1.0.tbz libdrm-2.4.12.tbz=
 libffi-3.0.9.tbz libfontenc-1.0.5.tbz libiconv-1.13.1_1.tbz libpciaccess-0=
.11.0.tbz libpthread-stubs-0.3_3.tbz libvolume_id-0.81.1.tbz libxcb-1.5.tbz=
 libxkbfile-1.0.6
>  .tbz libxkbui-1.0.2_1.tbz libxml2-2.7.6_2.tbz m4-1.4.14,1.tbz pciids-200=
91229.tbz pcre-8.02.tbz perl-5.10.1.tbz pixman-0.16.6.tbz pkg-config-0.23_1=
.tbz policykit-0.9_6.tbz polkit-0.96_1.tbz printproto-1.0.4.tbz python26-2.=
6.4.tbz randrproto-1.3.1.tbz xextproto-7.1.1.tbz xf86miscproto-0.9.3.tbz xf=
86vidmodeproto-2.3.tbz xineramaproto-1.2.tbz xkeyboard-config-1.8.tbz xorg-=
server-1.7.5,1.tbz xproto-7.0.16.tbz
> adding dependencies
> pkg_add bison-2.4.1,1.tbz
> pkg_add consolekit-0.4.1_2.tbz
>=20
> =3D=3D=3D=3D
> Note that some of the standard modules are provided as separate
> ports since they require extra dependencies:
>=20
> bsddb           databases/py-bsddb
> gdbm            databases/py-gdbm
> sqlite3		databases/py-sqlite3
> tkinter         x11-toolkits/py-tkinter
>=20
> Install them as needed.
> =3D=3D=3D=3D
>=20
> Removing stale symlinks from /usr/bin...
>     Skipping /usr/bin/perl
>     Skipping /usr/bin/perl5
> Done.
> Creating various symlinks in /usr/bin...
>     Symlinking /usr/local/bin/perl5.10.1 to /usr/bin/perl
>     Symlinking /usr/local/bin/perl5.10.1 to /usr/bin/perl5
> Done.
> Cleaning up /etc/make.conf... Done.
> Spamming /etc/make.conf... Done.
> Cleaning up /etc/manpath.config... Done.
> Spamming /etc/manpath.config... Done.
>=20
>=20
> *****************************************************************
> Although libxcb can yield dramatic improvements in speed,
> memory footprint, and responsiveness, and will probably
> become the default Xlib for X.org/freedesktop.org, it is
> still experimental software.  Some broken callers will abort()
> on locking assertion failures.  As a temporary workaround, set
> LIBXCB_ALLOW_SLOPPY_LOCK in your environment to skip the abort().
> This may result in noisy stacktrace printing.
> *****************************************************************
>=20
>=20
> =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D
>=20
> Gamin will only provide realtime notification of changes for at most n fi=
les,
> where n is the minimum value between (kern.maxfiles * 0.7) and
> (kern.maxfilesperproc - 200). Beyond that limit, files will be polled.
>=20
> If you often open several large folders with Nautilus, you might want to
> increase the kern.maxfiles tunable (you do not need to set
> kern.maxfilesperproc, since it is computed at boot time from kern.maxfile=
s).
>=20
> For a typical desktop, add the following line to /boot/loader.conf, then
> reboot the system:
>=20
>     kern.maxfiles=3D"25000"
>=20
> The behavior of gamin can be controlled via the various gaminrc files.
> See http://www.gnome.org/~veillard/gamin/config.html on how to create
> these files.  In particular, if you find gam_server is taking up too much
> CPU time polling for changes, something like the following may help
> in one of the gaminrc files:
>=20
> # reduce polling frequency to once per 10 seconds
> # for UFS file systems in order to lower CPU load
> fsset ufs poll 10
>=20
> =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D
>=20
> pkg_add damageproto-1.2.0.tbz
> pkg_add dbus-1.2.16_1.tbz
> skipping dbus-1.2.16_1, already added
> pkg_add dbus-glib-0.84.tbz
> skipping dbus-glib-0.84, already added
> pkg_add dmidecode-2.10.tbz
> pkg_add dri-7.4.4,2.tbz
> pkg_add dri2proto-2.2.tbz
> pkg_add eggdbus-0.6.tbz
> skipping eggdbus-0.6, already added
> pkg_add expat-2.0.1_1.tbz
> skipping expat-2.0.1_1, already added
> pkg_add fixesproto-4.1.1.tbz
> skipping fixesproto-4.1.1, already added
> pkg_add fontsproto-2.1.0.tbz
> pkg_add freetype2-2.3.11.tbz
> pkg_add gamin-0.1.10_3.tbz
> skipping gamin-0.1.10_3, already added
> pkg_add gettext-0.17_1.tbz
> skipping gettext-0.17_1, already added
> pkg_add gio-fam-backend-2.22.4.tbz
> skipping gio-fam-backend-2.22.4, already added
> pkg_add glib-2.22.4.tbz
> skipping glib-2.22.4, already added
> pkg_add gnome_subr-1.0.tbz
> skipping gnome_subr-1.0, already added
> pkg_add gobject-introspection-0.6.7.tbz
> skipping gobject-introspection-0.6.7, already added
> pkg_add hal-0.5.13_14.tbz
> pkg_add inputproto-2.0.tbz
> pkg_add kbproto-1.0.4.tbz
> skipping kbproto-1.0.4, already added
> pkg_add libGL-7.4.4.tbz
> pkg_add libICE-1.0.6,1.tbz
> pkg_add libSM-1.1.1,1.tbz
> pkg_add libX11-1.3.3,1.tbz
> skipping libX11-1.3.3,1, already added
> pkg_add libXau-1.0.5.tbz
> skipping libXau-1.0.5, already added
> pkg_add libXaw-1.0.7,1.tbz
> pkg_add libXdamage-1.1.2.tbz
> skipping libXdamage-1.1.2, already added
> pkg_add libXdmcp-1.0.3.tbz
> skipping libXdmcp-1.0.3, already added
> pkg_add libXext-1.1.1,1.tbz
> skipping libXext-1.1.1,1, already added
> pkg_add libXfixes-4.0.4.tbz
> skipping libXfixes-4.0.4, already added
> pkg_add libXfont-1.4.0,1.tbz
> pkg_add libXi-1.3,1.tbz
> pkg_add libXinerama-1.1,1.tbz
> pkg_add libXmu-1.0.5,1.tbz
> skipping libXmu-1.0.5,1, already added
> pkg_add libXp-1.0.0,1.tbz
> skipping libXp-1.0.0,1, already added
> pkg_add libXpm-3.5.7.tbz
> skipping libXpm-3.5.7, already added
> pkg_add libXt-1.0.7.tbz
> skipping libXt-1.0.7, already added
> pkg_add libXxf86misc-1.0.2.tbz
> pkg_add libXxf86vm-1.1.0.tbz
> skipping libXxf86vm-1.1.0, already added
> pkg_add libdrm-2.4.12.tbz
> skipping libdrm-2.4.12, already added
> pkg_add libffi-3.0.9.tbz
> skipping libffi-3.0.9, already added
> pkg_add libfontenc-1.0.5.tbz
> skipping libfontenc-1.0.5, already added
> pkg_add libiconv-1.13.1_1.tbz
> skipping libiconv-1.13.1_1, already added
> pkg_add libpciaccess-0.11.0.tbz
> pkg_add libpthread-stubs-0.3_3.tbz
> skipping libpthread-stubs-0.3_3, already added
> pkg_add libvolume_id-0.81.1.tbz
> skipping libvolume_id-0.81.1, already added
> pkg_add libxcb-1.5.tbz
> skipping libxcb-1.5, already added
> pkg_add libxkbfile-1.0.6.tbz
> pkg_add libxkbui-1.0.2_1.tbz
> pkg_add libxml2-2.7.6_2.tbz
> skipping libxml2-2.7.6_2, already added
> pkg_add m4-1.4.14,1.tbz
> skipping m4-1.4.14,1, already added
> pkg_add pciids-20091229.tbz
> skipping pciids-20091229, already added
> pkg_add pcre-8.02.tbz
> skipping pcre-8.02, already added
> pkg_add perl-5.10.1.tbz
> skipping perl-5.10.1, already added
> pkg_add pixman-0.16.6.tbz
> pkg_add pkg-config-0.23_1.tbz
> skipping pkg-config-0.23_1, already added
> pkg_add policykit-0.9_6.tbz
> skipping policykit-0.9_6, already added
> pkg_add polkit-0.96_1.tbz
> skipping polkit-0.96_1, already added
> pkg_add printproto-1.0.4.tbz
> skipping printproto-1.0.4, already added
> pkg_add python26-2.6.4.tbz
> skipping python26-2.6.4, already added
> pkg_add randrproto-1.3.1.tbz
> pkg_add xextproto-7.1.1.tbz
> skipping xextproto-7.1.1, already added
> pkg_add xf86miscproto-0.9.3.tbz
> skipping xf86miscproto-0.9.3, already added
> pkg_add xf86vidmodeproto-2.3.tbz
> skipping xf86vidmodeproto-2.3, already added
> pkg_add xineramaproto-1.2.tbz
> skipping xineramaproto-1.2, already added
> pkg_add xkeyboard-config-1.8.tbz
> pkg_add xorg-server-1.7.5,1.tbz
> pkg_add xproto-7.0.16.tbz
> skipping xproto-7.0.16, already added
> =3D=3D=3D>   xf86-input-elographics-1.2.3_3 depends on file: /usr/local/l=
ibdata/pkgconfig/randrproto.pc - found
> =3D=3D=3D>   xf86-input-elographics-1.2.3_3 depends on file: /usr/local/l=
ibdata/pkgconfig/inputproto.pc - found
> =3D=3D=3D>   xf86-input-elographics-1.2.3_3 depends on file: /usr/local/l=
ibdata/pkgconfig/xorg-server.pc - found
> =3D=3D=3D>   xf86-input-elographics-1.2.3_3 depends on file: /usr/local/l=
ibdata/pkgconfig/xproto.pc - found
> =3D=3D=3D>   xf86-input-elographics-1.2.3_3 depends on file: /usr/local/l=
ibdata/pkgconfig/xi.pc - found
> =3D=3D=3D>   xf86-input-elographics-1.2.3_3 depends on executable: pkg-co=
nfig - found
> =3D=3D=3D>  Configuring for xf86-input-elographics-1.2.3_3
> checking for a BSD-compatible install... /usr/bin/install -c -o root -g w=
heel
> checking whether build environment is sane... yes
> checking for a thread-safe mkdir -p... ./install-sh -c -d
> checking for gawk... no
> checking for mawk... no
> checking for nawk... nawk
> checking whether make sets $(MAKE)... yes
> checking whether to enable maintainer-specific portions of Makefiles... n=
o
> checking build system type... amd64-portbld-freebsd7.2
> checking host system type... amd64-portbld-freebsd7.2
> checking for style of include used by make... GNU
> checking for gcc... cc
> checking for C compiler default output file name... a.out
> checking whether the C compiler works... yes
> checking whether we are cross compiling... no
> checking for suffix of executables...=20
> checking for suffix of object files... o
> checking whether we are using the GNU C compiler... yes
> checking whether cc accepts -g... yes
> checking for cc option to accept ISO C89... none needed
> checking dependency style of cc... gcc3
> checking for a sed that does not truncate output... /usr/bin/sed
> checking for grep that handles long lines and -e... /usr/bin/grep
> checking for egrep... /usr/bin/grep -E
> checking for ld used by cc... /usr/bin/ld
> checking if the linker (/usr/bin/ld) is GNU ld... yes
> checking for /usr/bin/ld option to reload object files... -r
> checking for BSD-compatible nm... /usr/bin/nm -B
> checking whether ln -s works... yes
> checking how to recognize dependent libraries... pass_all
> checking how to run the C preprocessor... cc -E
> checking for ANSI C header files... yes
> checking for sys/types.h... yes
> checking for sys/stat.h... yes
> checking for stdlib.h... yes
> checking for string.h... yes
> checking for memory.h... yes
> checking for strings.h... yes
> checking for inttypes.h... yes
> checking for stdint.h... yes
> checking for unistd.h... yes
> checking dlfcn.h usability... yes
> checking dlfcn.h presence... yes
> checking for dlfcn.h... yes
> checking whether we are using the GNU C++ compiler... yes
> checking whether c++ accepts -g... yes
> checking dependency style of c++... gcc3
> checking how to run the C++ preprocessor... c++ -E
> checking for g77... no
> checking for xlf... no
> checking for f77... no
> checking for frt... no
> checking for pgf77... no
> checking for cf77... no
> checking for fort77... no
> checking for fl32... no
> checking for af77... no
> checking for xlf90... no
> checking for f90... no
> checking for pgf90... no
> checking for pghpf... no
> checking for epcf90... no
> checking for gfortran... no
> checking for g95... no
> checking for xlf95... no
> checking for f95... no
> checking for fort... no
> checking for ifort... no
> checking for ifc... no
> checking for efc... no
> checking for pgf95... no
> checking for lf95... no
> checking for ftn... no
> checking whether we are using the GNU Fortran 77 compiler... no
> checking whether  accepts -g... no
> checking the maximum length of command line arguments... (cached) 262144
> checking command to parse /usr/bin/nm -B output from cc object... ok
> checking for objdir... .libs
> checking for ar... ar
> checking for ranlib... ranlib
> checking for strip... strip
> checking if cc supports -fno-rtti -fno-exceptions... no
> checking for cc option to produce PIC... -fPIC
> checking if cc PIC flag -fPIC works... yes
> checking if cc static flag -static works... yes
> checking if cc supports -c -o file.o... yes
> checking whether the cc linker (/usr/bin/ld) supports shared libraries...=
 yes
> checking whether -lc should be explicitly linked in... no
> checking dynamic linker characteristics... freebsd7.2 ld.so
> checking how to hardcode library paths into programs... immediate
> checking whether stripping libraries is possible... yes
> checking if libtool supports shared libraries... yes
> checking whether to build shared libraries... yes
> checking whether to build static libraries... no
> configure: creating libtool
> appending configuration tag "CXX" to libtool
> checking for ld used by c++... /usr/bin/ld
> checking if the linker (/usr/bin/ld) is GNU ld... yes
> checking whether the c++ linker (/usr/bin/ld) supports shared libraries..=
. yes
> checking for c++ option to produce PIC... -fPIC
> checking if c++ PIC flag -fPIC works... yes
> checking if c++ static flag -static works... yes
> checking if c++ supports -c -o file.o... yes
> checking whether the c++ linker (/usr/bin/ld) supports shared libraries..=
. yes
> checking dynamic linker characteristics... freebsd7.2 ld.so
> (cached) (cached) checking how to hardcode library paths into programs...=
 immediate
> appending configuration tag "F77" to libtool
> checking for gcc... (cached) cc
> checking whether we are using the GNU C compiler... (cached) yes
> checking whether cc accepts -g... (cached) yes
> checking for cc option to accept ISO C89... (cached) none needed
> checking dependency style of cc... (cached) gcc3
> checking if RANDR is defined... yes
> checking if XINPUT is defined... no
> checking for pkg-config... /usr/local/bin/pkg-config
> checking pkg-config is at least version 0.9.0... yes
> checking for XORG... yes
> checking for ANSI C header files... (cached) yes
> configure: creating ./config.status
> config.status: creating Makefile
> config.status: creating src/Makefile
> config.status: creating man/Makefile
> config.status: creating config.h
> config.status: executing depfiles commands
> =3D=3D=3D>  Building for xf86-input-elographics-1.2.3_3
> make  all-recursive
> Making all in src
> /bin/sh ../libtool --tag=3DCC    --mode=3Dcompile cc -DHAVE_CONFIG_H -I. =
-I..      -O2 -fno-strict-aliasing -pipe -I/usr/local/include/xorg -I/usr/l=
ocal/include/pixman-1 -I/usr/local/include    -I../src -MT xf86Elo.lo -MD -=
MP -MF .deps/xf86Elo.Tpo -c -o xf86Elo.lo xf86Elo.c
> mkdir .libs
>  cc -DHAVE_CONFIG_H -I. -I.. -O2 -fno-strict-aliasing -pipe -I/usr/local/=
include/xorg -I/usr/local/include/pixman-1 -I/usr/local/include -I../src -M=
T xf86Elo.lo -MD -MP -MF .deps/xf86Elo.Tpo -c xf86Elo.c  -fPIC -DPIC -o .li=
bs/xf86Elo.o
> xf86Elo.c: In function 'xf86EloControl':
> xf86Elo.c:800: warning: passing argument 3 of 'InitButtonClassDeviceStruc=
t' from incompatible pointer type
> xf86Elo.c:800: error: too few arguments to function 'InitButtonClassDevic=
eStruct'
> xf86Elo.c:824: warning: passing argument 3 of 'InitValuatorClassDeviceStr=
uct' makes pointer from integer without a cast
> xf86Elo.c:824: error: too few arguments to function 'InitValuatorClassDev=
iceStruct'
> xf86Elo.c:833: error: too few arguments to function 'InitValuatorAxisStru=
ct'
> xf86Elo.c:837: error: too few arguments to function 'InitValuatorAxisStru=
ct'
> *** Error code 1
>=20
> Stop in /work/a/ports/x11-drivers/xf86-input-elographics/work/xf86-input-=
elographics-1.2.3/src.
> *** Error code 1
>=20
> Stop in /work/a/ports/x11-drivers/xf86-input-elographics/work/xf86-input-=
elographics-1.2.3.
> *** Error code 1
>=20
> Stop in /work/a/ports/x11-drivers/xf86-input-elographics/work/xf86-input-=
elographics-1.2.3.
> *** Error code 1
>=20
> Stop in /a/ports/x11-drivers/xf86-input-elographics.
> =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
> build of /usr/ports/x11-drivers/xf86-input-elographics ended at Tue May  =
4 01:14:57 UTC 2010
>=20

--=20
Pav Lucistnik <pav@oook.cz>
              <pav@FreeBSD.org>
In the computer industry, there are three kinds of lies: lies, damn
lies, and benchmarks.

--=-hlbVMuTbhEiE0QwdVXR8
Content-Type: application/pgp-signature; name="signature.asc"
Content-Description: Toto je =?UTF-8?Q?digit=C3=A1ln=C4=9B?=
	=?ISO-8859-1?Q?_podepsan=E1?= =?UTF-8?Q?_=C4=8D=C3=A1st?=
	=?ISO-8859-1?Q?_zpr=E1vy?=

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (FreeBSD)

iEYEABECAAYFAkvgbxIACgkQntdYP8FOsoLKqwCfcr1QLmgK67z4XsGqacl4ElMa
M9kAnRvYoDjFO70PfEjMDp3XX1Z/1XcW
=ucDc
-----END PGP SIGNATURE-----

--=-hlbVMuTbhEiE0QwdVXR8--




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1272999699.66046.66.camel>