Date: Tue, 15 Jan 2002 07:47:46 +1100 From: "Greg, Jodie, Ciaran and Heather" <gregjodi@bigpond.net.au> To: freebsd-mobile@FreeBSD.org Subject: CS423x sound on Dell Latitude CPi D266XT stopped working Message-ID: <20020115074746.A24340@localhost.bigpond.net.au>
next in thread | raw e-mail | index | archive | help
G'day everyone,
I've had this laptop for nearly 2.5 years and for at least two years
had sound working AOK with (I believe)
options PNPBIOS
device pcm
in the kernel config. At some point last year I rearranged my disk
partitions and reinstalled FreeBSD then upgraded to 4-stable. I hadn't
kept my kernel file (big mistake!) and adding the above did not bring
back my sound. Looking through archives it appears these lines have
been successful for other users of this model laptop so I don't know what
has happened. I have tried many other variations including specifying
irq's, ports etc the same as windows uses (I triple boot with BeOS and
Win2K). No joy. Can anyone using this laptop tell me whether they had
anything change on them over the last 6 months or so? (It could have been
that long since I used sound in FreeBSD.) Does anyone have any suggestions
to try? I've spent so long at this that I can't think straight anymore.
More details are below. You can see from #17 below that I have tried many
kernel configs, and this is just with my latest checkout of stable,
there were many other tries as well, too numerous too mention here
unless someone wants all the gruesome details.
Thanks,
Greg
4>xxxx@yyy:~$ uname -a
FreeBSD yyyy.anu.edu.au 4.5-PRERELEASE FreeBSD 4.5-PRERELEASE #17: Tue Jan 15
06:48:20 EST 2002 toor@laptop.lane.family:/usr/src/sys/compile/LAPTOP i386
5>xxxx@yyy:~$ dmesg
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.5-PRERELEASE #17: Tue Jan 15 06:48:20 EST 2002
toor@laptop.lane.family:/usr/src/sys/compile/LAPTOP
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (267.27-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x652 Stepping = 2
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PA
T,PSE36,MMX,FXSR>
real memory = 134152192 (131008K bytes)
avail memory = 127107072 (124128K bytes)
Preloaded elf kernel "kernel" at 0xc0376000.
netsmb_dev: loaded
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 5 entries at 0xc00fb8b0
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX host to PCI bridge (AGP disabled)> on motherboard
pci0: <PCI bus> on pcib0
pci0: <NeoMagic MagicGraph 128XD SVGA controller> at 2.0 irq 11
pcic0: <TI PCI-1131 PCI-CardBus Bridge> irq 11 at device 3.0 on pci0
pcic0: PCI Memory allocated: 0x44000000
pcic0: TI113X PCI Config Reg: [ring enable][speaker enable][CSC serial isa irq]
pccard0: <PC Card bus (classic)> on pcic0
pcic1: <TI PCI-1131 PCI-CardBus Bridge> irq 11 at device 3.1 on pci0
pcic1: PCI Memory allocated: 0x44001000
pcic1: TI113X PCI Config Reg: [ring enable][speaker enable][CSC serial isa irq]
pccard1: <PC Card bus (classic)> on pcic1
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0x860-0x86f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <Intel 82371AB/EB (PIIX4) USB controller> at 7.2 irq 11
chip1: <Intel 82371AB Power management controller> port 0x840-0x84f at device 7.
3 on pci0
orm0: <Option ROM> at iomem 0xc0000-0xcbfff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
unknown: <PNP0c01> can't assign resources
unknown: <PNP0000> can't assign resources
unknown: <PNP0303> can't assign resources
unknown: <PNP0f13> can't assign resources
unknown: <PNP0501> can't assign resources
unknown: <PNP0401> can't assign resources
unknown: <CSC0000> can't assign resources
unknown: <PNP0700> can't assign resources
ad0: 6194MB <IBM-DADA-26480> [13424/15/63] at ata0-master UDMA33
acd0: CDROM <TOSHIBA CD-ROM XM-1802B> at ata1-master using PIO4
Mounting root from ufs:/dev/ad0s3a
pccard: card inserted, slot 0
ed1 at port 0x240-0x25f irq 11 flags 0x80010 slot 0 on pccard0
ed1: address 00:80:c8:8e:0a:0c, type Linksys (16 bit)
lxtphy0: <LXT970 10/100 media interface> on miibus0
lxtphy0: 100baseFX, 100baseFX-FDX, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-F
DX, auto
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20020115074746.A24340>