Date: Wed, 3 Dec 2003 13:27:21 GMT From: "ted@mail.plymouth.edu" <Ted.Wisniewski@typhoon.plymouth.edu> To: FreeBSD-gnats-submit@FreeBSD.org Subject: kern/59923: High I/O on second or 3rd IDE drive causes crash Message-ID: <200312031327.hB3DRLRA087206@typhoon.plymouth.edu> Resent-Message-ID: <200312031830.hB3IUR2W051195@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 59923 >Category: kern >Synopsis: High I/O on second or 3rd IDE drive causes crash >Confidential: no >Severity: critical >Priority: high >Responsible: freebsd-bugs >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Wed Dec 03 10:30:24 PST 2003 >Closed-Date: >Last-Modified: >Originator: ted@mail.plymouth.edu <Ted Wisniewski> >Release: FreeBSD 5.2-BETA i386 >Organization: Plymouth State University >Environment: System: FreeBSD testmachine.plymouth.edu 5.2-BETA FreeBSD 5.2-BETA #0: Mon Dec 1 12:03:54 GMT 2003 root@testmachine.plymouth.edu:/usr/src/sys/i386/compile/GENERIC i386 >Description: Tested on multiple PC's Dell Gx260 & GX400's When Heavy I/O occurs on the second or third IDE (ATA) drive the following occurs: ad1: TIMEOUT - WRITE_DMA retrying - (2 tries left) ata0 : resetting devices GEOM: destroy disk ad1 dp=0xc2e36860 Fatal trap 12: page fault in kernel mode cpuid=0;apic id=00 fault virtual address = 0xdeadc0ea fault code = supervisor read, page not present instruction pointer = 0x0: 0xc0633839 stack pointer = 0x10: 0xce6a7c14 frame pointer = 0x10: 0xce6a7c34 code segment = base 0x0, limit 0xfffff, type = 0x1b = DPL 0, pres 1, def32 1, gran 1 processor eflags = interrupt enabled, resume, IOPL = 0 current process = 2 (g_event) kernel: type 12 trap, code = 0 stopped at g_slice_access+0x59: movl 0xc(%ecx),%eax Output of "dmesg": Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.2-BETA #0: Wed Dec 3 10:09:49 GMT 2003 root@testmachine.plymouth.edu:/usr/src/sys/i386/compile/GENERIC Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a6a000. Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Pentium(R) 4 CPU 1300MHz (1285.34-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf0a Stepping = 10 Features=0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM> real memory = 267874304 (255 MB) avail memory = 250564608 (238 MB) Pentium Pro MTRR support enabled acpi0: <DELL GX400 > on motherboard pcibios: BIOS version 2.10 Using $PIR table, 9 entries at 0xc00fbbb0 acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 acpi_cpu0: <CPU> on acpi0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib0: slot 31 INTD is routed to irq 11 pcib0: slot 31 INTB is routed to irq 10 pcib0: slot 31 INTC is routed to irq 9 pcib0: slot 31 INTB is routed to irq 10 agp0: <Intel 82850 host to AGP bridge> mem 0xe8000000-0xefffffff at device 0.0 on pci0 pcib1: <PCIBIOS PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci_cfgintr: 1:0 INTA BIOS irq 11 pci1: <display, VGA> at device 0.0 (no driver attached) pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci2: <ACPI PCI bus> on pcib2 pcib2: slot 7 INTA is routed to irq 11 pcib2: slot 10 INTA is routed to irq 11 pcib2: slot 12 INTA is routed to irq 11 fxp0: <Intel 82558 Pro/100 Ethernet> port 0xdce0-0xdcff mem 0xff700000-0xff7fffff,0xf8001000-0xf8001fff irq 11 at device 7.0 on pci2 fxp0: Ethernet address 00:90:27:99:8b:77 miibus0: <MII bus> on fxp0 inphy0: <i82555 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp1: <Intel 82558 Pro/100 Ethernet> port 0xdcc0-0xdcdf mem 0xff600000-0xff6fffff,0xf8000000-0xf8000fff irq 11 at device 10.0 on pci2 fxp1: Ethernet address 00:90:27:46:5e:f9 miibus1: <MII bus> on fxp1 inphy1: <i82555 10/100 media interface> on miibus1 inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xdc00-0xdc7f mem 0xff5ffc00-0xff5ffc7f irq 11 at device 12.0 on pci2 xl0: Ethernet address: 00:06:5b:1c:12:ef miibus2: <MII bus> on xl0 ukphy0: <Generic IEEE 802.3u media interface> on miibus2 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH2 UDMA100 controller> port 0xffa0-0xffaf at device 31.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata0: [MPSAFE] ata1: at 0x170 irq 15 on atapci0 ata1: [MPSAFE] uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0xff80-0xff9f irq 11 at device 31.2 on pci0 usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered pci0: <serial bus, SMBus> at device 31.3 (no driver attached) uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port 0xff60-0xff7f irq 9 at device 31.4 on pci0 usb1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered pci0: <multimedia, audio> at device 31.5 (no driver attached) fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A sio1 port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A ppc0 port 0x778-0x77f,0x378-0x37f irq 7 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface orm0: <Option ROM> at iomem 0xc0000-0xcbfff on isa0 pmtimer0 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounter "TSC" frequency 1285338612 Hz quality 800 Timecounters tick every 10.000 msec ata0-master: DMA limited to UDMA33, non-ATA66 cable or device ata0-slave: DMA limited to UDMA33, non-ATA66 cable or device GEOM: create disk ad0 dp=0xc2e36a60 ad0: 4112MB <WDC AC14300R> [8912/15/63] at ata0-master UDMA33 GEOM: create disk ad1 dp=0xc2e36860 ad1: 114473MB <WDC WD1200JB-00EVA0> [232581/16/63] at ata0-slave UDMA33 acd0: CDROM <SAMSUNG CD-ROM SC-148C> at ata1-master PIO4 Mounting root from ufs:/dev/ad0s1a WARNING: / was not properly dismounted WARNING: /tmp was not properly dismounted WARNING: /usr was not properly dismounted /usr: superblock summary recomputed WARNING: /var was not properly dismounted /var: mount pending error: blocks 4 files 1 >How-To-Repeat: cd /mnt-point-of-second-drive dd if=/dev/zero bs=2048 of=filename.dta >Fix: None known of, other than not to use a second drive. >Release-Note: >Audit-Trail: >Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200312031327.hB3DRLRA087206>