Date: Wed, 9 Jan 2008 08:50:13 +0200 From: "Eimar Koort" <eimar.koort@gmail.com> To: freebsd-hardware@freebsd.org Cc: Alexandr Rybalko <ray@dlink.ua> Subject: Re: ZTE MG478 usbmodem Message-ID: <109c90a0801082250r70fc1c43l4bcf27840ab45faf@mail.gmail.com> In-Reply-To: <20080108110918.6fdd9f3b.ray@dlink.ua> References: <109c90a0801061055s3c028b06j488d9bdb3419d2f6@mail.gmail.com> <200801062342.59891.hselasky@c2i.net> <109c90a0801062205s6d12e608y59095d703d6eec1c@mail.gmail.com> <20080108110918.6fdd9f3b.ray@dlink.ua>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi, >> > > >> > Maybe you need to add the VID/PID to "/sys/dev/usb/umodem.c". > >> > > >> > vendor=0x19d2 product=0xfffe > >> > > >> > --HPS > >> > > > You also need append string like this: > > { USB_VENDOR_MOTOROLA2, USB_PRODUCT_MOTOROLA2_A41XV32X, ANY, > { UQ_ASSUME_CM_OVER_DATA }}, > > but with your VID/PID to usb_quirks struct in file usb_quirks.c > and then recompile kernel, because usb_quirks.c compiling with usb > device and usb device by default in kernel. > No luck at all. What i did: added two lines to /usr/src/sys/usb/usbdevs vendor ZTE 0x19d2 ZTE product ZTE MG478 0xfffe ZTE CDMA2000 Added to /usr/src/sys/usb/usb_quircs.c { USB_VENDOR_ZTE, USB_PRODUCT_ZTE_MG478, ANY { UQ_ASSUME_CM_OVER_DATA }}, In kernel config added following: device umodem device ucom New kernel and after connecting device: uhub0: device problem (SET_ADDR_FAILED), disabling port 1 ugen0: ZTE, Incorporated ZTE CDMA Tech, rev 1.10/0.00, addr 2 laptop# usbdevs -v Controller /dev/usb0: addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x0000), rev 1.00 port 1 addr 2: full speed, self powered, config 1, ZTE CDMA Tech(0xfffe), ZTE, Incorporated(0x19d2), rev 0.00 port 2 powered Any ideas? -- Eimar Koort ( eimar.koort@gmail.com )
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?109c90a0801082250r70fc1c43l4bcf27840ab45faf>