Date: Mon, 14 May 2001 13:54:50 -0400 From: "Tony" <tony@tntpro.com> To: "Matt Hetherington" <matt@flowtrading.com>, "'freebsd-questions@freebsd.org'" <freebsd-questions@FreeBSD.ORG> Subject: Re: Problem Installing 2nd LinkSys LNE100TX NIC on FreeBSD 4.3-RELEASE Message-ID: <002f01c0dc9e$f9dede10$0a00a8c0@TONY> References: <18CB832B51FCD311815900D0B73E90A611258E@beethoven.flowtrading.com>
next in thread | previous in thread | raw e-mail | index | archive | help
I dont know your level of knowledge so I'm going to start basic... have you checked your dmesg to see if it see's the second card? have you modified your /etc/rc.conf to show a dc1 and dc0? just a couple of things to get you started. Tony ----- Original Message ----- From: "Matt Hetherington" <matt@flowtrading.com> To: "'freebsd-questions@freebsd.org'" <freebsd-questions@FreeBSD.ORG> Sent: Monday, May 14, 2001 1:04 PM Subject: Problem Installing 2nd LinkSys LNE100TX NIC on FreeBSD 4.3-RELEASE > I just installed FreeBSD 4.3-RELEASE via FTP. My intention is to build a > router/firewall, but cannot get the 2nd NIC to be recognized by FreeBSD. > > I am running on Intel platform with 2 LinkSys LNE100TX 10/100 PCI NICs. > After (and during) the installation, the 1st of the two LinkSys NICs is > recognized as dc0 and functions properly, but the 2nd NIC is never > initialized. Since the LinkSys NICs are PCI, I assumed both would be > "automatically" recognized. Since they were not, I am searching for the > steps necessary to get both LinkSys NICs working. > > Can anyone point me to a doc that describes how to configure 2 LinkSys > LNE100TX cards to run on the same machine under FreeBSD? Or, can someone > provide confirmation that this configuration is not supported under FreeBSD? > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?002f01c0dc9e$f9dede10$0a00a8c0>