Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 19 Jan 2011 09:51:41 -0500
From:      Steve Polyack <korvus@comcast.net>
To:        Jeremy Chadwick <freebsd@jdc.parodius.com>
Cc:        freebsd-stable <freebsd-stable@FreeBSD.org>, User Questions <freebsd-questions@freebsd.org>, freebsd-hardware@freebsd.org
Subject:   Re: Keyboard repeat issues with Dell Optiplex 980s
Message-ID:  <4D36FA7D.1030503@comcast.net>
In-Reply-To: <4D36EB91.1050406@comcast.net>
References:  <4D3608BD.7010604@comcast.net> <20110118225617.GA16727@icarus.home.lan> <4D36EB91.1050406@comcast.net>

next in thread | previous in thread | raw e-mail | index | archive | help
On 01/19/11 08:48, Steve Polyack wrote:
> On 1/18/2011 5:56 PM, Jeremy Chadwick wrote:
>> On Tue, Jan 18, 2011 at 04:40:13PM -0500, Steve Polyack wrote:
>>> We've recently upgraded a few desktop workstations from Dell
>>> Optiplex 960s to Optiplex 980s.  We were running FreeBSD
>>> 8.1-RELEASE.  The migration was performed by simply swapping the
>>> drives into the new systems.  Immediately after switching people
>>> over, they all began to report bizarre keyboard issues - things like
>>> infinite key repeats (letters, numbers, "enter") for keys they did
>>> not hold down.  The key repeats continue indefinitely until another
>>> key is pressed.  Occasionally, even mouse input will trigger similar
>>> infinite keyboard input repetition.  In addition to the repeat
>>> issue, sometimes physical key-presses are not registered by FreeBSD,
>>> leading to typos and angry developers.
>>>
>>> We've tried doing fresh installs of FreeBSD 8.2-RC2 on two of these
>>> systems, and the issue persists.  Because of the observed behavior,
>>> I'm thinking that this is due to new hardware in the 980s which
>>> isn't timing or handling interrupts correctly under the FreeBSD
>>> kernel.
>>>
>>> Looking at a 'pciconf -lvb' from each system, I noticed that the 980
>>> has two USB controllers which probe under ehci(4), while the 960
>>> (which does not exhibit this problem), enumerates six uhci(4)
>>> controllers and two ehci(4) controllers.  To cut to the chase here,
>>> the 960 users' keyboards probe under a USB1.0 uhci(4), while the
>>> 980s only have ehci(4) devices to attach to.
>>>
>>> So, I guess what I'm asking is - has anyone else seen any keyboard
>>> repeat or other USB craziness with ehci(4) ports or otherwise Intel
>>> PCH controllers?    Any fellow Optiplex 980 users?  I'd be more than
>>> happy to provide pciconf or other output if requested.
>> Try adding the following to /boot/loader.conf then reboot and see if
>> the "excessive repeat" behaviour changes:
>>
>> hint.kbdmux.0.disabled="1"
>>
>> It would also help if you would state exactly what brand/model of
>> keyboard is used.  Yes, believe it or not, it matters.  dmesg output
>> would be helpful in this case.
>>
> The keyboard is also a Dell model - model KB1421, or listed as "Dell 
> QuiteKey Keyboard" under dmesg.  The same keyboard does not exhibit 
> the strange behavior when used with the older model of tower (Optiplex 
> 960).
>
>  I'll reboot today with the loader.conf hint you provided.  I'll let 
> you guys know if it helps.  Thanks!
>

The problem still exists with the kbdmux.0.disabled hint.  It definitely 
took effect, as there is no longer a /dev/kbdmux0, and dmesg lists the 
refusal to register the kbdmux module.  Any other ideas?  We've tried 
playing with the hw.usb.ehci.lostinrbug and hw.usb.ehci.no_hs sysctls, 
but they don't make a difference either.

Looking at the ehci(4) man page, this sticks out at me:
BUGS
      The driver is not finished and is quite buggy.

      There is currently no support for isochronous transfers.






Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4D36FA7D.1030503>