Date: Sat, 07 Jan 2012 20:11:49 -0800 From: Dennis Glatting <freebsd@pki2.com> To: freebsd-questions@freebsd.org Subject: RELENG_9 and mps driver (LSI 9211-8i) Message-ID: <1325995909.53760.11.camel@btw.pki2.com>
next in thread | raw e-mail | index | archive | help
I have three LSI 9211-8i boards in my system: two flashed to T and one R. The Ts appear to work fine but the operating system doesn't see the RAID1 volume on R, but neither did RELENG_8. I am writing to ask how well R is supported, if at all. Or, since this my first case of using R under LSI+FreeBSD, perhaps there is common mistakes I may be making -- the array is stable. The boards (mps1 is the board with the RAID1 array): mps0: <LSI SAS2008> port 0xde00-0xdeff mem 0xfd9fc000-0xfd9fffff,0xfd980000-0xfd9bffff irq 19 at device 0.0 on pci1 mps0: Firmware: 12.00.00.00 mps0: IOCCapabilities: 1285c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,HostDisc> mps1: <LSI SAS2008> port 0x9e00-0x9eff mem 0xfdefc000-0xfdefffff,0xfde80000-0xfdebffff irq 19 at device 0.0 on pci5 mps1: Firmware: 12.00.00.00 mps1: IOCCapabilities: 185c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,IR> mps2: <LSI SAS2008> port 0x8e00-0x8eff mem 0xfdcfc000-0xfdcfffff,0xfdc80000-0xfdcbffff irq 16 at device 0.0 on pci6 mps2: Firmware: 12.00.00.00 mps2: IOCCapabilities: 1285c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,HostDisc> bd3# uname -a FreeBSD bd3 9.0-STABLE FreeBSD 9.0-STABLE #0: Sat Jan 7 16:09:10 PST 2012 root@bd3:/sys/amd64/compile/BULLDOZER amd64 (i.e., the OS was csup against RELENG_9 and build today). Other data: bd3# dmesg Copyright (c) 1992-2012 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 9.0-STABLE #0: Sat Jan 7 16:09:10 PST 2012 root@bd3:/sys/amd64/compile/BULLDOZER amd64 CPU: AMD FX(tm)-8150 Eight-Core Processor (4017.99-MHz K8-class CPU) Origin = "AuthenticAMD" Id = 0x600f12 Family = 15 Model = 1 Stepping = 2 Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,C MOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> Features2=0x1698220b<SSE3,PCLMULQDQ,MON,SSSE3,CX16,SSE4.1,SSE4.2,POPCNT,AESNI, XSAVE,AVX> AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> AMD Features2=0x1c9bfff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,I BS,XOP,SKINIT,WDT,LWP,FMA4,NodeId,Topology,<b23>,<b24>> TSC: P-state invariant, performance statistics real memory = 17179869184 (16384 MB) avail memory = 16508002304 (15743 MB) Event timer "LAPIC" quality 400 ACPI APIC Table: <GBT GBTUACPI> FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs FreeBSD/SMP: 1 package(s) x 8 core(s) cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 2 cpu3 (AP): APIC ID: 3 cpu4 (AP): APIC ID: 4 cpu5 (AP): APIC ID: 5 cpu6 (AP): APIC ID: 6 cpu7 (AP): APIC ID: 7 ioapic0: Changing APIC ID to 8 ioapic0 <Version 2.1> irqs 0-23 on motherboard kbd1 at kbdmux0 acpi0: <GBT GBTUACPI> on motherboard acpi0: Power Button (fixed) acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, cfca0000 (3) failed Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 cpu2: <ACPI CPU> on acpi0 cpu3: <ACPI CPU> on acpi0 cpu4: <ACPI CPU> on acpi0 cpu5: <ACPI CPU> on acpi0 cpu6: <ACPI CPU> on acpi0 cpu7: <ACPI CPU> on acpi0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: <base peripheral> at device 0.2 (no driver attached) pcib1: <ACPI PCI-PCI bridge> irq 19 at device 3.0 on pci0 pci1: <ACPI PCI bus> on pcib1 mps0: <LSI SAS2008> port 0xde00-0xdeff mem 0xfd9fc000-0xfd9fffff,0xfd980000-0xfd 9bffff irq 19 at device 0.0 on pci1 mps0: Firmware: 12.00.00.00 mps0: IOCCapabilities: 1285c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,Even tReplay,HostDisc> pcib2: <ACPI PCI-PCI bridge> irq 16 at device 4.0 on pci0 pci2: <ACPI PCI bus> on pcib2 em0: <Intel(R) PRO/1000 Network Connection 7.2.3> port 0xcf00-0xcf1f mem 0xfd7c0 000-0xfd7dffff,0xfd700000-0xfd77ffff,0xfd7fc000-0xfd7fffff irq 16 at device 0.0 on pci2 em0: Using MSIX interrupts with 3 vectors em0: Ethernet address: 00:1b:21:c6:d2:a0 pcib3: <ACPI PCI-PCI bridge> irq 17 at device 9.0 on pci0 pci3: <ACPI PCI bus> on pcib3 xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfd5f8000-0xfd5fffff irq 17 at d evice 0.0 on pci3 xhci0: 64 byte context size. usbus0 on xhci0 pcib4: <ACPI PCI-PCI bridge> irq 18 at device 10.0 on pci0 pci4: <ACPI PCI bus> on pcib4 ahci0: <Marvell 88SE9172 AHCI SATA controller> port 0xaf00-0xaf07,0xae00-0xae03, 0xad00-0xad07,0xac00-0xac03,0xab00-0xab0f mem 0xfcbff000-0xfcbff1ff irq 18 at de vice 0.0 on pci4 ahci0: AHCI v1.00 with 2 6Gbps ports, Port Multiplier supported with FBS ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 pcib5: <ACPI PCI-PCI bridge> irq 19 at device 11.0 on pci0 pci5: <ACPI PCI bus> on pcib5 mps1: <LSI SAS2008> port 0x9e00-0x9eff mem 0xfdefc000-0xfdefffff,0xfde80000-0xfd ebffff irq 19 at device 0.0 on pci5 mps1: Firmware: 12.00.00.00 mps1: IOCCapabilities: 185c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,IR> pcib6: <ACPI PCI-PCI bridge> irq 16 at device 12.0 on pci0 pci6: <ACPI PCI bus> on pcib6 mps2: <LSI SAS2008> port 0x8e00-0x8eff mem 0xfdcfc000-0xfdcfffff,0xfdc80000-0xfd cbffff irq 16 at device 0.0 on pci6 mps2: Firmware: 12.00.00.00 mps2: IOCCapabilities: 1285c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,Even tReplay,HostDisc> pcib7: <ACPI PCI-PCI bridge> irq 17 at device 13.0 on pci0 pci7: <ACPI PCI bus> on pcib7 vgapci0: <VGA-compatible display> port 0xee00-0xeeff mem 0xd0000000-0xdfffffff,0 xfdac0000-0xfdadffff irq 17 at device 0.0 on pci7 hdac0: <ATI (Unknown) High Definition Audio Controller> mem 0xfdafc000-0xfdaffff f irq 18 at device 0.1 on pci7 ahci1: <ATI IXP700 AHCI SATA controller> port 0xff00-0xff07,0xfe00-0xfe03,0xfd00 -0xfd07,0xfc00-0xfc03,0xfb00-0xfb0f mem 0xfdfff000-0xfdfff3ff irq 19 at device 1 7.0 on pci0 ahci1: AHCI v1.20 with 4 6Gbps ports, Port Multiplier supported ahcich2: <AHCI channel> at channel 0 on ahci1 ahcich3: <AHCI channel> at channel 1 on ahci1 ahcich4: <AHCI channel> at channel 2 on ahci1 ahcich5: <AHCI channel> at channel 3 on ahci1 ohci0: <OHCI (generic) USB controller> mem 0xfdffe000-0xfdffefff irq 18 at devic e 18.0 on pci0 usbus1: <OHCI (generic) USB controller> on ohci0 ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfdffd000-0xfdffd0ff irq 17 at d evice 18.2 on pci0 usbus2: EHCI version 1.0 usbus2: <EHCI (generic) USB 2.0 controller> on ehci0 ohci1: <OHCI (generic) USB controller> mem 0xfdffc000-0xfdffcfff irq 18 at devic e 19.0 on pci0 usbus3: <OHCI (generic) USB controller> on ohci1 ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfdffb000-0xfdffb0ff irq 17 at d evice 19.2 on pci0 usbus4: EHCI version 1.0 usbus4: <EHCI (generic) USB 2.0 controller> on ehci1 pci0: <serial bus, SMBus> at device 20.0 (no driver attached) atapci0: <ATI IXP700/800 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177, 0x376,0xfa00-0xfa0f at device 20.1 on pci0 ata0: <ATA channel> at channel 0 on atapci0 ata1: <ATA channel> at channel 1 on atapci0 isab0: <PCI-ISA bridge> at device 20.3 on pci0 isa0: <ISA bus> on isab0 pcib8: <ACPI PCI-PCI bridge> at device 20.4 on pci0 pci8: <ACPI PCI bus> on pcib8 ohci2: <OHCI (generic) USB controller> mem 0xfdffa000-0xfdffafff irq 18 at devic e 20.5 on pci0 usbus5: <OHCI (generic) USB controller> on ohci2 pcib9: <ACPI PCI-PCI bridge> at device 21.0 on pci0 pci9: <ACPI PCI bus> on pcib9 re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F PCIe Gigabit Ethernet> port 0x6e00-0x6ef f mem 0xfd0ff000-0xfd0fffff,0xfd0f8000-0xfd0fbfff irq 17 at device 0.0 on pci9 re0: Using 1 MSI-X message re0: Chip rev. 0x2c800000 re0: MAC rev. 0x00000000 miibus0: <MII bus> on re0 rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0 rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX , 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX- master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow re0: Ethernet address: 50:e5:49:45:55:8e pcib10: <ACPI PCI-PCI bridge> at device 21.1 on pci0 pci10: <ACPI PCI bus> on pcib10 xhci1: <XHCI (generic) USB 3.0 controller> mem 0xfcff8000-0xfcffffff irq 17 at d evice 0.0 on pci10 xhci1: 64 byte context size. usbus6 on xhci1 pcib11: <ACPI PCI-PCI bridge> at device 21.2 on pci0 pci11: <ACPI PCI bus> on pcib11 ahci2: <Marvell 88SE9172 AHCI SATA controller> port 0x3f00-0x3f07,0x3e00-0x3e03, 0x3d00-0x3d07,0x3c00-0x3c03,0x3b00-0x3b0f mem 0xfcdff000-0xfcdff1ff irq 17 at de vice 0.0 on pci11 ahci2: AHCI v1.00 with 2 6Gbps ports, Port Multiplier supported with FBS ahcich6: <AHCI channel> at channel 0 on ahci2 ahcich7: <AHCI channel> at channel 1 on ahci2 ohci3: <OHCI (generic) USB controller> mem 0xfdff9000-0xfdff9fff irq 18 at devic e 22.0 on pci0 usbus7: <OHCI (generic) USB controller> on ohci3 ehci2: <EHCI (generic) USB 2.0 controller> mem 0xfdff8000-0xfdff80ff irq 17 at d evice 22.2 on pci0 usbus8: EHCI version 1.0 usbus8: <EHCI (generic) USB 2.0 controller> on ehci2 attimer0: <AT timer> port 0x40-0x43 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 atrtc0: <AT realtime clock> port 0x70-0x73 on acpi0 Event timer "RTC" frequency 32768 Hz quality 0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xd5000-0xdafff,0xdb000-0xdbfff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] ppc0: cannot reserve I/O port range hwpstate0: <Cool`n'Quiet 2.0> on cpu0 Timecounters tick every 1.000 msec hdac0: HDA Codec #0: ATI R6xx HDMI pcm0: <HDA ATI R6xx HDMI PCM #0 HDMI> at cad 0 nid 1 on hdac0 usbus0: 5.0Gbps Super Speed USB v3.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 480Mbps High Speed USB v2.0 usbus3: 12Mbps Full Speed USB v1.0 usbus4: 480Mbps High Speed USB v2.0 usbus5: 12Mbps Full Speed USB v1.0 usbus6: 5.0Gbps Super Speed USB v3.0 usbus7: 12Mbps Full Speed USB v1.0 usbus8: 480Mbps High Speed USB v2.0 ugen0.1: <0x1b6f> at usbus0 uhub0: <0x1b6f XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 ugen1.1: <ATI> at usbus1 uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 ugen2.1: <ATI> at usbus2 uhub2: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 ugen3.1: <ATI> at usbus3 uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 ugen4.1: <ATI> at usbus4 uhub4: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4 ugen5.1: <ATI> at usbus5 uhub5: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 ugen6.1: <0x1b6f> at usbus6 uhub6: <0x1b6f XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus6 ugen7.1: <ATI> at usbus7 uhub7: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus7 ugen8.1: <ATI> at usbus8 uhub8: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus8 uhub5: 2 ports with 2 removable, self powered uhub7: 4 ports with 4 removable, self powered uhub1: 5 ports with 5 removable, self powered uhub3: 5 ports with 5 removable, self powered uhub0: 4 ports with 4 removable, self powered uhub6: 4 ports with 4 removable, self powered uhub8: 4 ports with 4 removable, self powered uhub2: 5 ports with 5 removable, self powered uhub4: 5 ports with 5 removable, self powered ugen1.2: <BTC> at usbus1 ukbd0: <BTC USB Multimedia Keyboard, class 0/0, rev 1.10/1.00, addr 2> on usbus1 kbd2 at ukbd0 uhid0: <BTC USB Multimedia Keyboard, class 0/0, rev 1.10/1.00, addr 2> on usbus1 ada0 at ahcich2 bus 0 scbus5 target 0 lun 0 ada0: <Corsair Force 3 SSD 1.3.3> ATA-8 SATA 3.x device ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 85857MB (175836528 512 byte sectors: 16H 63S/T 16383C) ada0: Previously was known as ad8 ada1 at ahcich3 bus 0 scbus6 target 0 lun 0 ada1: <OCZ-AGILITY2 1.33> ATA-8 SATA 2.x device ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada1: Command Queueing enabled ada1: 57241MB (117231408 512 byte sectors: 16H 63S/T 16383C) ada1: Previously was known as ad10 ada2 at ahcich4 bus 0 scbus7 target 0 lun 0 ada2: <ST31000333AS SD35> ATA-8 SATA 2.x device ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada2: Command Queueing enabled ada2: 953869MB (1953525168 512 byte sectors: 16H 63S/T 16383C) ada2: Previously was known as ad12 da7 at mps0 bus 0 scbus0 target 7 lun 0 da7: <ATA WDC WD25EZRS-00J 0A80> Fixed Direct Access SCSI-6 device da7: 300.000MB/s transfers da7: Command Queueing enabled da7: 2384658MB (4883781168 512 byte sectors: 255H 63S/T 304001C) da3 at mps0 bus 0 scbus0 target 3 lun 0 da3: <ATA WDC WD25EZRS-00J 0A80> Fixed Direct Access SCSI-6 device da3: 300.000MB/s transfers da3: Command Queueing enabled da3: 2384658MB (4883781168 512 byte sectors: 255H 63S/T 304001C) da0 at mps0 bus 0 scbus0 target 0 lun 0 da0: <ATA WDC WD25EZRS-00J 0A80> Fixed Direct Access SCSI-6 device da0: 300.000MB/s transfers da0: Command Queueing enabled da0: 2384658MB (4883781168 512 byte sectors: 255H 63S/T 304001C) da9 at mps2 bus 0 scbus4 target 1 lun 0 da9: <ATA WDC WD25EZRS-00J 0A80> Fixed Direct Access SCSI-6 device da9: 300.000MB/s transfers da9: Command Queueing enabled da9: 2384658MB (4883781168 512 byte sectors: 255H 63S/T 304001C) da10 at mps2 bus 0 scbus4 target 2 lun 0 da10: <ATA WDC WD25EZRS-00J 0A80> Fixed Direct Access SCSI-6 device da10: 300.000MB/s transfers da10: Command Queueing enabled da10: 2384658MB (4883781168 512 byte sectors: 255H 63S/T 304001C) da8 at mps2 bus 0 scbus4 target 0 lun 0 da8: <ATA WDC WD25EZRS-00J 0A80> Fixed Direct Access SCSI-6 device da8: 300.000MB/s transfers da8: Command Queueing enabled da8: 2384658MB (4883781168 512 byte sectors: 255H 63S/T 304001C) da11 at mps2 bus 0 scbus4 target 3 lun 0 da11: <ATA WDC WD25EZRS-00J 0A80> Fixed Direct Access SCSI-6 device da11: 300.000MB/s transfers da11: Command Queueing enabled da11: 2384658MB (4883781168 512 byte sectors: 255H 63S/T 304001C) da6 at mps0 bus 0 scbus0 target 6 lun 0 da6: <ATA WDC WD25EZRS-00J 0A80> Fixed Direct Access SCSI-6 device da6: 300.000MB/s transfers da6: Command Queueing enabled da6: 2384658MB (4883781168 512 byte sectors: 255H 63S/T 304001C) da4 at mps0 bus 0 scbus0 target 4 lun 0 da4: <ATA WDC WD25EZRS-00J 0A80> Fixed Direct Access SCSI-6 device da4: 300.000MB/s transfers da4: Command Queueing enabled da4: 2384658MB (4883781168 512 byte sectors: 255H 63S/T 304001C) da5 at mps0 bus 0 scbus0 target 5 lun 0 da5: <ATA WDC WD25EZRS-00J 0A80> Fixed Direct Access SCSI-6 device da5: 300.000MB/s transfers da5: Command Queueing enabled da5: 2384658MB (4883781168 512 byte sectors: 255H 63S/T 304001C) da1 at mps0 bus 0 scbus0 target 1 lun 0 da1: <ATA WDC WD25EZRS-00J 0A80> Fixed Direct Access SCSI-6 device da1: 300.000MB/s transfers da1: Command Queueing enabled da1: 2384658MB (4883781168 512 byte sectors: 255H 63S/T 304001C) da2 at mps0 bus 0 scbus0 target 2 lun 0 da2: <ATA WDC WD25EZRS-00J 0A80> Fixed Direct Access SCSI-6 device da2: 300.000MB/s transfers da2: Command Queueing enabled da2: 2384658MB (4883781168 512 byte sectors: 255H 63S/T 304001C) SMP: AP CPU #1 Launched! SMP: AP CPU #4 Launched! SMP: AP CPU #6 Launched! SMP: AP CPU #5 Launched! SMP: AP CPU #2 Launched! SMP: AP CPU #7 Launched! SMP: AP CPU #3 Launched! Timecounter "TSC-low" frequency 15695275 Hz quality 1000 Trying to mount root from ufs:/dev/gpt/disk0 [rw]... ZFS filesystem version 5 ZFS storage pool version 28
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1325995909.53760.11.camel>