Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 3 Jul 2014 19:50:51 +0000 (UTC)
From:      Luiz Otavio O Souza <loos@FreeBSD.org>
To:        src-committers@freebsd.org, svn-src-all@freebsd.org, svn-src-head@freebsd.org
Subject:   svn commit: r268233 - head/sys/dev/etherswitch/rtl8366
Message-ID:  <201407031950.s63JopbC043432@svn.freebsd.org>

next in thread | raw e-mail | index | archive | help
Author: loos
Date: Thu Jul  3 19:50:50 2014
New Revision: 268233
URL: http://svnweb.freebsd.org/changeset/base/268233

Log:
  Initialize the switch vlan table at attachment.
  
  Update some comments on code, specifying the correct vlans used on switch
  setup.
  
  Advertise the proper switch operation mode (the rtl8366rb only support
  dot1q vlans).
  
  This fixes the breakage that i introduced on r249752 and make the rtl8366rb
  switch works again with etherswitchcfg(8).
  
  Tested on TP-Link 1043ND.
  
  Tested by:	me, Harm Weites (harm at weites.com)

Modified:
  head/sys/dev/etherswitch/rtl8366/rtl8366rb.c

Modified: head/sys/dev/etherswitch/rtl8366/rtl8366rb.c
==============================================================================
--- head/sys/dev/etherswitch/rtl8366/rtl8366rb.c	Thu Jul  3 19:37:25 2014	(r268232)
+++ head/sys/dev/etherswitch/rtl8366/rtl8366rb.c	Thu Jul  3 19:50:50 2014	(r268233)
@@ -75,7 +75,8 @@ struct rtl8366rb_softc {
 static etherswitch_info_t etherswitch_info = {
 	.es_nports =		RTL8366RB_NUM_PORTS,
 	.es_nvlangroups =	RTL8366RB_NUM_VLANS,
-	.es_name =			"Realtek RTL8366RB"
+	.es_name =		"Realtek RTL8366RB",
+	.es_vlan_caps =		ETHERSWITCH_VLAN_DOT1Q,
 };
 
 #define RTL_LOCK(_sc)	mtx_lock(&(_sc)->sc_mtx)
@@ -148,6 +149,9 @@ rtl8366rb_probe(device_t dev)
 static void
 rtl8366rb_init(device_t dev)
 {
+	int i;
+	struct rtl8366rb_softc *sc;
+
 	/* Initialisation for TL-WR1043ND */
 	smi_rmw(dev, RTL8366RB_RCR,
 		RTL8366RB_RCR_HARD_RESET,
@@ -157,17 +161,21 @@ rtl8366rb_init(device_t dev)
 	smi_rmw(dev, RTL8366RB_SGCR,
 		RTL8366RB_SGCR_EN_VLAN | RTL8366RB_SGCR_EN_VLAN_4KTB,
 		RTL8366RB_SGCR_EN_VLAN, RTL_WAITOK);
-	/* remove port 0 form VLAN 0 */
+	/* Initialize our vlan table. */
+	sc = device_get_softc(dev);
+	for (i = 0; i <= 1; i++)
+		sc->vid[i] = (i + 1) | ETHERSWITCH_VID_VALID;
+	/* Remove port 0 from VLAN 1. */
 	smi_rmw(dev, RTL8366RB_VMCR(RTL8366RB_VMCR_MU_REG, 0),
 		(1 << 0), 0, RTL_WAITOK);
-	/* add port 0 untagged and port 5 tagged to VLAN 1 */
+	/* Add port 0 untagged and port 5 tagged to VLAN 2. */
 	smi_rmw(dev, RTL8366RB_VMCR(RTL8366RB_VMCR_MU_REG, 1),
 		((1 << 5 | 1 << 0) << RTL8366RB_VMCR_MU_MEMBER_SHIFT)
 			| ((1 << 5 | 1 << 0) << RTL8366RB_VMCR_MU_UNTAG_SHIFT),
 		((1 << 5 | 1 << 0) << RTL8366RB_VMCR_MU_MEMBER_SHIFT
 			| ((1 << 0) << RTL8366RB_VMCR_MU_UNTAG_SHIFT)),
 		RTL_WAITOK);
-	/* set PVLAN 1 for port 0 */
+	/* Set PVID 2 for port 0. */
 	smi_rmw(dev, RTL8366RB_PVCR_REG(0),
 		RTL8366RB_PVCR_VAL(0, RTL8366RB_PVCR_PORT_MASK),
 		RTL8366RB_PVCR_VAL(0, 1), RTL_WAITOK);
@@ -560,7 +568,7 @@ rtl_getport(device_t dev, etherswitch_po
 	sc = device_get_softc(dev);
 	vlangroup = RTL8366RB_PVCR_GET(p->es_port,
 		rtl_readreg(dev, RTL8366RB_PVCR_REG(p->es_port)));
-	p->es_pvid = sc->vid[vlangroup];
+	p->es_pvid = sc->vid[vlangroup] & ETHERSWITCH_VID_MASK;
 	
 	if (p->es_port < RTL8366RB_NUM_PHYS) {
 		mii = device_get_softc(sc->miibus[p->es_port]);
@@ -595,7 +603,7 @@ rtl_setport(device_t dev, etherswitch_po
 	sc = device_get_softc(dev);
 	vlangroup = -1;
 	for (i = 0; i < RTL8366RB_NUM_VLANS; i++) {
-		if (sc->vid[i] == p->es_pvid) {
+		if ((sc->vid[i] & ETHERSWITCH_VID_MASK) == p->es_pvid) {
 			vlangroup = i;
 			break;
 		}
@@ -618,13 +626,15 @@ rtl_setport(device_t dev, etherswitch_po
 static int
 rtl_getvgroup(device_t dev, etherswitch_vlangroup_t *vg)
 {
+	struct rtl8366rb_softc *sc;
 	uint16_t vmcr[3];
 	int i;
 	
 	for (i=0; i<3; i++)
 		vmcr[i] = rtl_readreg(dev, RTL8366RB_VMCR(i, vg->es_vlangroup));
 		
-	vg->es_vid = RTL8366RB_VMCR_VID(vmcr) | ETHERSWITCH_VID_VALID;
+	sc = device_get_softc(dev);
+	vg->es_vid = sc->vid[vg->es_vlangroup];
 	vg->es_member_ports = RTL8366RB_VMCR_MEMBER(vmcr);
 	vg->es_untagged_ports = RTL8366RB_VMCR_UNTAG(vmcr);
 	vg->es_fid = RTL8366RB_VMCR_FID(vmcr);
@@ -639,6 +649,10 @@ rtl_setvgroup(device_t dev, etherswitch_
 
 	sc = device_get_softc(dev);
 	sc->vid[g] = vg->es_vid;
+	/* VLAN group disabled ? */
+	if (vg->es_member_ports == 0 && vg->es_untagged_ports == 0 && vg->es_vid == 0)
+		return (0);
+	sc->vid[g] |= ETHERSWITCH_VID_VALID;
 	rtl_writereg(dev, RTL8366RB_VMCR(RTL8366RB_VMCR_DOT1Q_REG, g),
 		(vg->es_vid << RTL8366RB_VMCR_DOT1Q_VID_SHIFT) & RTL8366RB_VMCR_DOT1Q_VID_MASK);
 	rtl_writereg(dev, RTL8366RB_VMCR(RTL8366RB_VMCR_MU_REG, g),
@@ -650,6 +664,17 @@ rtl_setvgroup(device_t dev, etherswitch_
 }
 
 static int
+rtl_getconf(device_t dev, etherswitch_conf_t *conf)
+{
+
+	/* Return the VLAN mode. */
+	conf->cmd = ETHERSWITCH_CONF_VLAN_MODE;
+	conf->vlan_mode = ETHERSWITCH_VLAN_DOT1Q;
+
+	return (0);
+}
+
+static int
 rtl_readphy(device_t dev, int phy, int reg)
 {
 	struct rtl8366rb_softc *sc = device_get_softc(dev);
@@ -748,6 +773,7 @@ static device_method_t rtl8366rb_methods
 	DEVMETHOD(miibus_writereg,	rtl_writephy),
 
 	/* etherswitch interface */
+	DEVMETHOD(etherswitch_getconf,	rtl_getconf),
 	DEVMETHOD(etherswitch_getinfo,	rtl_getinfo),
 	DEVMETHOD(etherswitch_readreg,	rtl_readreg),
 	DEVMETHOD(etherswitch_writereg,	rtl_writereg),



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201407031950.s63JopbC043432>