Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 04 Dec 2009 06:20:08 +0900 (JST)
From:      Hiroki Sato <hrs@FreeBSD.org>
To:        jhb@FreeBSD.org
Cc:        freebsd-stable@FreeBSD.org
Subject:   Re: loader(8) readin failed on 7.2R and later including 8.0R
Message-ID:  <20091204.062008.155444535.hrs@allbsd.org>
In-Reply-To: <200912030803.29797.jhb@freebsd.org>
References:  <200912020948.05698.jhb@freebsd.org> <20091203.192913.103115892.hrs@allbsd.org> <200912030803.29797.jhb@freebsd.org>

next in thread | previous in thread | raw e-mail | index | archive | help
----Security_Multipart(Fri_Dec__4_06_20_08_2009_790)--
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

John Baldwin <jhb@freebsd.org> wrote
  in <200912030803.29797.jhb@freebsd.org>:

jh> On Thursday 03 December 2009 5:29:13 am Hiroki Sato wrote:
jh> > John Baldwin <jhb@freebsd.org> wrote
jh> >   in <200912020948.05698.jhb@freebsd.org>:
jh> >
jh> > jh> On Tuesday 01 December 2009 12:13:39 pm Hiroki Sato wrote:
jh> > jh> >  While the "load" command seemed to finish, the box got stuck just
jh> > jh> >  after entering "boot" command.
jh> > jh> >
jh> > jh> >  Curious to say, I have got this symptom only on a specific box in
jh> > jh> >  more than ten different boxes I upgraded so far; it is based on an
jh> > jh> >  old motherboard Supermicro P4DPE[*].
jh> > jh> >
jh> > jh> >  [*]
jh> http://www.supermicro.com/products/motherboard/Xeon/E7500/P4DPE.cfm
jh> > jh> >
jh> > jh> >  Any workaround?  Booting from release CDROMs (7.2R and 8.0R) also
jh> > jh> >  fail.  On the box "7.1R" or "7.1R's loader + 7.2R kernel" worked
jh> > jh> >  fine.  It is possible something in changes of loader(8) between 7.1R
jh> > jh> >  and 7.2R is the cause, but I am still not sure what it is...
jh> > jh>
jh> > jh> It may be related to the loader switching to using memory > 1MB for its
jh> > jh> malloc().  Maybe try building the loader with
jh> 'LOADER_NO_GPT_SUPPORT=yes' in
jh> > jh> /etc/src.conf?
jh> >
jh> >  Thanks, a recompiled loader with LOADER_NO_GPT_SUPPORT=yes' displayed
jh> >  "elf32_loadimage: could not read symbols - skipped!" for 8.0R kernel.
jh> >  This is the same as 7.1R's loader + 8.0R kernel case.
jh>
jh> Can you get the output of 'smap' from the loader?  Is the 8.0 kernel bigger
jh> than the 7.x kernel?  If so, can you try trimming the 8.0 kernel a bit to see
jh> if that changes things?

 Sure.  Output of smap on an 8.0R loader with LOADER_NO_GPT_SUPPORT=yes
 was:

| OK smap
| SMAP type=01 base=0000000000000000 len=000000000009f400
| SMAP type=02 base=000000000009f400 len=0000000000000c00
| SMAP type=02 base=00000000000dc000 len=0000000000024000
| SMAP type=01 base=0000000000100000 len=0000000000e00000
| SMAP type=02 base=0000000000f00000 len=0000000000100000
| SMAP type=01 base=0000000001000000 len=00000000beef0000
| SMAP type=03 base=00000000bfef0000 len=000000000000c000
| SMAP type=04 base=00000000bfefc000 len=0000000000004000
| SMAP type=01 base=00000000bff00000 len=0000000000080000
| SMAP type=02 base=00000000bff80000 len=0000000000080000
| SMAP type=02 base=00000000fec00000 len=0000000000010000
| SMAP type=02 base=00000000fee00000 len=0000000000001000
| SMAP type=02 base=00000000ff800000 len=0000000000400000
| SMAP type=02 base=00000000fff00000 len=0000000000100000
| OK

 Size difference between the two kernels was:

| -r-xr-xr-x  1 root  wheel   9708240 Dec  1 16:22 kernel.7/kernel
| -r-xr-xr-x  1 root  wheel  11492703 Nov 21 15:48 kernel.8/kernel

 Then I rebuilt a smaller 8.0 kernel by removing some entries from the
 kernel configuration file.  The size is now smaller than 7.1R kernel:

| -r-xr-xr-x  1 root  wheel  7710491 Dec  3 21:10 /boot/kernel.8X/kernel

 Loading the new kernel seemed to work fine with the recompiled 8.0R
 loader, but it got stuck just after entering "boot":

| OK load /boot/kernel.8X/kernel
| /boot/kernel.8X/kernel text=0x5a7664 data=0x88d74+0x82f04 syms=[0x4+0x6d290+0x4+0x987e3]
| OK boot
| /

 Loading 7.1R kernel by using the recompiled 8.0R loader had no
 problem.

-- Hiroki

----Security_Multipart(Fri_Dec__4_06_20_08_2009_790)--
Content-Type: application/pgp-signature
Content-Transfer-Encoding: 7bit

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.9 (FreeBSD)

iEYEABECAAYFAksYK4gACgkQTyzT2CeTzy3p8QCgjoEwN1MCqZLCQeW4QqpNfOJW
dGIAoIDtVjygzlSPAmod9ziwOSdb3Q8F
=PBYl
-----END PGP SIGNATURE-----

----Security_Multipart(Fri_Dec__4_06_20_08_2009_790)----



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20091204.062008.155444535.hrs>