Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 25 Feb 2010 13:20:58 +0100
From:      Claude Buisson <clbuisson@orange.fr>
To:        FreeBSD Current <freebsd-current@freebsd.org>
Subject:   ATA CDROM no more detected with ATA_CAM under VMWare WS
Message-ID:  <4B866B2A.1090608@orange.fr>

next in thread | raw e-mail | index | archive | help
Hello,

Updating a -CURRENT system from Jan 10 to Feb 21, under VMWare WS 5.5.9, the
virtual ATA CDROM is no more detected.
This is with an ATA_CAM kernel.

The CDROM is detected with a non ATA_CAM kernel.

Here are:

demesg 2010/01/10 source, ATA_CAM kernel

Copyright (c) 1992-2010 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
         The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.0-CURRENT #0: Tue Jan 12 16:08:41 CET 2010
     toor@zaza.home.tbf:/home/obj/home/src/sys/VMWARE i386
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) M processor 1.86GHz (1859.06-MHz 686-class CPU)
   Origin = "GenuineIntel"  Id = 0x6d8  Stepping = 8
Features=0xfe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS>
   AMD Features=0x100000<NX>
real memory  = 268435456 (256 MB)
avail memory = 253235200 (241 MB)
module_register_init: MOD_LOAD (vesa, 0xc06e4fd0, 0) error 6
acpi0: <PTLTD   RSDT> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82443BX (440 BX) host to PCI bridge> on hostb0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1050-0x105f at device 7.1 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x1060-0x107f irq 9 at
device 7.2 on pci0
uhci0: [ITHREAD]
usbus0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
pci0: <bridge> at device 7.3 (no driver attached)
vgapci0: <VGA-compatible display> port 0x1440-0x144f mem  0xf0000000-0xf7ffffff,
0xe8000000-0xe87fffff at device 15.0 on pci0
le0: <AMD PCnet-PCI> port 0x1080-0x10ff irq 11 at device 16.0 on pci0
le0: 16 receive buffers, 4 transmit buffers
le0: Ethernet address: 00:0c:29:69:06:7f
le0: [ITHREAD]
pcm0: <AudioPCI ES1371-A> port 0x1400-0x143f irq 10 at device 17.0 on pci0
pcm0: <Cirrus Logic CS4297A AC97 Codec>
pcm0: [ITHREAD]
pcm0: <Playback: DAC1,DAC2 / Record: ADC>
acpi_acad0: <AC Adapter> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model IntelliMouse, device ID 3
ppc0: <Parallel port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppc0: [ITHREAD]
ppbus0: <Parallel port bus> on ppc0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: [FILTER]
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
uart1: [FILTER]
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FILTER]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff,
0xdc000-0xdffff,0xe0000-0xe3fff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <12 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1859059329 Hz quality 800
Timecounters tick every 10.000 msec
usbus0: 12Mbps Full Speed USB v1.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
uhub0: 2 ports with 2 removable, self powered
ada0 at ata0 bus 0 scbus0 target 0 lun 0
ada0: <VMware Virtual IDE Hard Drive 00000001> ATA-4 device
ada0: 33.300MB/s transfers (UDMA2, PIO size 32768bytes)
ada0: 8192MB (16777216 512 byte sectors: 15H 63S/T 16383C)
cd0 at ata1 bus 0 scbus1 target 0 lun 0
cd0: <SONY DVD+-RW DW-D56A PDS7> Removable CD-ROM SCSI-0 device
cd0: 33.300MB/s transfers (UDMA2, PIO size 65534bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present
Trying to mount root from ufs:/dev/ada0s1a

Verbose dmesg 2010/02/21 source ATA_CAM kernel

Copyright (c) 1992-2010 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
         The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.0-CURRENT #0: Tue Feb 23 15:16:12 CET 2010
     toor@zaza.home.tbf:/home/obj/home/src/sys/VMWARE i386
Preloaded elf kernel "/boot/kernel/kernel" at 0xc092e000.
Preloaded elf module "/boot/kernel/snd_es137x.ko" at 0xc092e19c.
Preloaded elf module "/boot/kernel/sound.ko" at 0xc092e24c.
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 1859082508 Hz
CPU: Intel(R) Pentium(R) M processor 1.86GHz (1859.08-MHz 686-class CPU)
   Origin = "GenuineIntel"  Id = 0x6d8  Stepping = 8
Features=0xfe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS>
   AMD Features=0x100000<NX>
Instruction TLB: 4 KB Pages, 4-way set associative, 128 entries
Data TLB: 4 KB Pages, 4-way set associative, 128 entries
Instruction TLB: 4 MB pages, fully associative, 2 entries
2nd-level cache: 2-MB, 8-way set associative, 64-byte line size
1st-level instruction cache: 32 KB, 8-way set associative, 64 byte line size
Data TLB: 4 MB Pages, 4-way set associative, 8 entries
1st-level data cache: 32 KB, 8-way set associative, 64 byte line size
L2 cache: 2048 kbytes, 8-way associative, 64 bytes/line
real memory  = 268435456 (256 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c26000 - 0x000000000fa3cfff, 249655296 bytes (60951 pages)
0x000000000ff00000 - 0x000000000ffeffff, 983040 bytes (240 pages)
avail memory = 253231104 (241 MB)
bios32: Found BIOS32 Service Directory header at 0xc00f6c40
bios32: Entry = 0xfd880 (c00fd880)  Rev = 0  Len = 1
pcibios: PCI BIOS entry at 0xfd880+0x120
pnpbios: Found PnP BIOS data at 0xc00f6ca0
pnpbios: Entry = f0000:9486  Rev = 1.0
Other BIOS signatures found:
ULE: setup cpu 0
snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024]
feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5 feeder_rate_min=1
feeder_rate_max=2016000 feeder_rate_round=25
module_register_init: MOD_LOAD (vesa, 0xc06e7640, 0) error 6
io: <I/O>
random: <entropy source, Software, Yarrow>
mem: <memory>
CPU supports MTRRs but not enabled
null: <null device, zero device>
ACPI: RSDP 0xf6c70 00014 (v0 PTLTD )
ACPI: RSDT 0xfef7c02 00030 (v1 PTLTD    RSDT   06040000  LTP 00000000)
ACPI: FACP 0xfefbf14 00074 (v1 INTEL  440BX    06040000 PTL  000F4240)
ACPI: DSDT 0xfef7c32 042E2 (v1 PTLTD  Custom   06040000 MSFT 0100000D)
ACPI: FACS 0xfefcfc0 00040
ACPI: APIC 0xfefbf88 00050 (v1 PTLTD  ? APIC   06040000  LTP 00000000)
ACPI: BOOT 0xfefbfd8 00028 (v1 PTLTD  $SBFTBL$ 06040000  LTP 00000001)
npx0: INT 16 interface
acpi0: <PTLTD   RSDT> on motherboard
acpi0: [MPSAFE]
acpi0: [ITHREAD]
pci_open(1):    mode 1 addr port (0x0cf8) is 0x80003904
pci_open(1a):   mode1res=0x80000000 (0x80000000)
pci_cfgcheck:   device 0 [class=060000] [hdr=00] is there (id=71908086)
pcibios: BIOS version 2.10
AcpiOsDerivePciId: \\_SB_.PCI0.PWR_.PCI_ -> bus 0 dev 7 func 3
acpi0: Power Button (fixed)
acpi0: wakeup code va 0xc1416000 pa 0x1000
AcpiOsDerivePciId: \\_SB_.PCI0.REGS -> bus 0 dev 0 func 0
AcpiOsDerivePciId: \\_SB_.PCI0.ISA_.PIRX -> bus 0 dev 7 func 0
ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu0: switching to generic Cx mode
pci_link0:        Index  IRQ  Rtd  Ref  IRQs
   Initial Probe       0  255   N     0  3 4 5 6 7 9 10 11 14 15
   Validation          0  255   N     0  3 4 5 6 7 9 10 11 14 15
   After Disable       0  255   N     0  3 4 5 6 7 9 10 11 14 15
pci_link1:        Index  IRQ  Rtd  Ref  IRQs
   Initial Probe       0   11   N     0  3 4 5 6 7 9 10 11 14 15
   Validation          0   11   N     0  3 4 5 6 7 9 10 11 14 15
   After Disable       0  255   N     0  3 4 5 6 7 9 10 11 14 15
pci_link2:        Index  IRQ  Rtd  Ref  IRQs
   Initial Probe       0   10   N     0  3 4 5 6 7 9 10 11 14 15
   Validation          0   10   N     0  3 4 5 6 7 9 10 11 14 15
   After Disable       0  255   N     0  3 4 5 6 7 9 10 11 14 15
pci_link3:        Index  IRQ  Rtd  Ref  IRQs
   Initial Probe       0    9   N     0  3 4 5 6 7 9 10 11 14 15
   Validation          0    9   N     0  3 4 5 6 7 9 10 11 14 15
   After Disable       0  255   N     0  3 4 5 6 7 9 10 11 14 15
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
ACPI: Found matching pin for 0.16.INTA at func 0: 11
ACPI: Found matching pin for 0.17.INTA at func 0: 10
ACPI: Found matching pin for 0.7.INTD at func 2: 9
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found-> vendor=0x8086, dev=0x7190, revid=0x01
         domain=0, bus=0, slot=0, func=0
         class=06-00-00, hdrtype=0x00, mfdev=0
         cmdreg=0x0006, statreg=0x0210, cachelnsz=0 (dwords)
         lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
         map[10]: type Prefetchable Memory, range 32, base 0xe8000000, size 26,
enabled
found-> vendor=0x8086, dev=0x7191, revid=0x01
         domain=0, bus=0, slot=1, func=0
         class=06-04-00, hdrtype=0x01, mfdev=0
         cmdreg=0x011f, statreg=0x0220, cachelnsz=0 (dwords)
         lattimer=0x00 (0 ns), mingnt=0x80 (32000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x7110, revid=0x08
         domain=0, bus=0, slot=7, func=0
         class=06-01-00, hdrtype=0x00, mfdev=1
         cmdreg=0x0007, statreg=0x0280, cachelnsz=0 (dwords)
         lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x7111, revid=0x01
         domain=0, bus=0, slot=7, func=1
         class=01-01-8a, hdrtype=0x00, mfdev=0
         cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
         lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
         map[20]: type I/O Port, range 32, base 0x1050, size  4, enabled
found-> vendor=0x8086, dev=0x7112, revid=0x00
         domain=0, bus=0, slot=7, func=2
         class=0c-03-00, hdrtype=0x00, mfdev=0
         cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
         lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
         intpin=d, irq=9
         map[20]: type I/O Port, range 32, base 0x1060, size  5, enabled
pcib0: matched entry for 0.7.INTD (src \\_SB_.PCI0.ISA_.LNKD:0)
pcib0: slot 7 INTD routed to irq 9 via \\_SB_.PCI0.ISA_.LNKD
found-> vendor=0x8086, dev=0x7113, revid=0x08
         domain=0, bus=0, slot=7, func=3
         class=06-80-00, hdrtype=0x00, mfdev=1
         cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
         lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
         map[90]: type I/O Port, range 32, base 0x1040, size  4, enabled
found-> vendor=0x15ad, dev=0x0405, revid=0x00
         domain=0, bus=0, slot=15, func=0
         class=03-00-00, hdrtype=0x00, mfdev=0
         cmdreg=0x0003, statreg=0x0290, cachelnsz=8 (dwords)
         lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
         map[10]: type I/O Port, range 32, base 0x1440, size  4, enabled
         map[14]: type Memory, range 32, base 0xf0000000, size 27, enabled
         map[18]: type Memory, range 32, base 0xec000000, size 23, enabled
found-> vendor=0x1022, dev=0x2000, revid=0x10
         domain=0, bus=0, slot=16, func=0
         class=02-00-00, hdrtype=0x00, mfdev=0
         cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
         lattimer=0x40 (1920 ns), mingnt=0x06 (1500 ns), maxlat=0xff (63750 ns)
         intpin=a, irq=11
         map[10]: type I/O Port, range 32, base 0x1080, size  7, enabled
pcib0: matched entry for 0.16.INTA (src \\_SB_.PCI0.ISA_.LNKB:0)
pcib0: slot 16 INTA routed to irq 11 via \\_SB_.PCI0.ISA_.LNKB
found-> vendor=0x1274, dev=0x1371, revid=0x02
         domain=0, bus=0, slot=17, func=0
         class=04-01-00, hdrtype=0x00, mfdev=0
         cmdreg=0x0003, statreg=0x0610, cachelnsz=0 (dwords)
         lattimer=0x40 (1920 ns), mingnt=0x06 (1500 ns), maxlat=0xff (63750 ns)
         intpin=a, irq=10
         map[10]: type I/O Port, range 32, base 0x1400, size  6, enabled
pcib0: matched entry for 0.17.INTA (src \\_SB_.PCI0.ISA_.LNKC:0)
pcib0: slot 17 INTA routed to irq 10 via \\_SB_.PCI0.ISA_.LNKC
agp0: <Intel 82443BX (440 BX) host to PCI bridge> on hostb0
agp0: allocating GATT for aperture of size 64M
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1:   domain            0
pcib1:   secondary bus     1
pcib1:   subordinate bus   1
pcib1:   I/O decode        0xf000-0xfff
pcib1:   no prefetched decode
pcib1: could not get PCI interrupt routing table for \\_SB_.PCI0.AGP_ - AE_NOT_FOUND
pci1: <ACPI PCI bus> on pcib1
pci1: domain=0, physical bus=1
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,
0x376,0x1050-0x105f at device 7.1 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [MPSAFE]
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [MPSAFE]
ata1: [ITHREAD]
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x1060-0x107f irq 9 at
device 7.2 on pci0
uhci0: [MPSAFE]
uhci0: [ITHREAD]
usbus0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
pci0: <bridge> at device 7.3 (no driver attached)
vgapci0: <VGA-compatible display> port 0x1440-0x144f mem 0xf0000000-0xf7ffffff,0
xec000000-0xec7fffff at device 15.0 on pci0
le0: <AMD PCnet-PCI> port 0x1080-0x10ff irq 11 at device 16.0 on pci0
le0: 16 receive buffers, 4 transmit buffers
le0: bpf attached
le0: Ethernet address: 00:0c:29:69:06:7f
le0: [MPSAFE]
le0: [ITHREAD]
pcm0: <AudioPCI ES1371-A> port 0x1400-0x143f irq 10 at device 17.0 on pci0
pcm0: <Cirrus Logic CS4297A AC97 Codec (id = 0x43525913)>
pcm0: Codec features 6 bit master volume, no 3D Stereo Enhancement
pcm0: ac97 codec dac ready count: 0
pcm0: Mixer "vol":
pcm0: Mixer "pcm":
pcm0: Mixer "line":
pcm0: Mixer "mic":
pcm0: Mixer "cd":
pcm0: Mixer "rec":
pcm0: Mixer "igain":
pcm0: Mixer "line1":
pcm0: Mixer "phin":
pcm0: Mixer "video":
pcm0: [MPSAFE]
pcm0: [ITHREAD]
pcm0: clone manager: deadline=750ms flags=0x8000001e
pcm0: sndbuf_setmap 14d7000, 1000; 0xc18d7000 -> 14d7000
pcm0: sndbuf_setmap 14d5000, 1000; 0xc18d5000 -> 14d5000
pcm0: sndbuf_setmap 14ed000, 1000; 0xc18ed000 -> 14ed000
pcm0: <Playback: DAC1,DAC2 / Record: ADC>
acpi_acad0: <AC Adapter> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock (resolution 1000000us)
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: unable to allocate IRQ
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model IntelliMouse, device ID 3-00, 3 buttons
psm0: config:00000000, flags:00000008, packet size:4
psm0: syncmask:08, syncbits:00
ppc0: using extended I/O port range
PC873xx probe at 0x2e got unknown ID 0xb0
ppc0: SPP
ppc0: <Parallel port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppc0: [MPSAFE]
ppc0: [ITHREAD]
ppbus0: <Parallel port bus> on ppc0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: [FILTER]
uart0: fast interrupt
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
uart1: [FILTER]
uart1: fast interrupt
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: ic_type 81 part_id 80
fdc0: [FILTER]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
isa_probe_children: disabling PnP devices
pmtimer0 on isa0
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
atrtc: atrtc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sc: sc0 already exists; skipping it
uart: uart0 already exists; skipping it
uart: uart1 already exists; skipping it
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff,
0xdc000-0xdffff,0xe0000-0xe3fff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <12 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: scteken (teken terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
isa_probe_children: probing PnP devices
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_throttle0: P_CNT from P_BLK 0x1010
Device configuration finished.
Timecounter "TSC" frequency 1859082508 Hz quality 800
Timecounters tick every 10.000 msec
lo0: bpf attached
usbus0: 12Mbps Full Speed USB v1.0
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=00 devices=0x1
(aprobe0:ata0:0:0:0): SIGNATURE: 0000
acpi_acad0: acline initialization start
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
ata1: reset tp1 mask=01 ostat0=50 ostat1=ff
ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: reset tp2 stat0=00 stat1=00 devices=0x10000
(aprobe0:ata1:0:0:0): SIGNATURE: eb14
(aprobe0:ata1:0:0:0): Spinning up device
(aprobe0:ata1:0:0:0): ATA status error
(aprobe0:ata1:0:0:0): SETFEATURES SPIN-UP. ACB: ef 07 00 00 00 40 00 00 00 00 00 00
(aprobe0:ata1:0:0:0): CAM status: ATA Status Error
(aprobe0:ata1:0:0:0): ATA status: 51 (DRDY SERV ERR), error: 04 (ABRT )
(aprobe0:ata1:0:0:0): RES: 51 04 00 00 00 00 00 00 00 00 00
(aprobe0:ata1:0:0:0): Retrying command
(aprobe0:ata1:0:0:0): ATA status error
(aprobe0:ata1:0:0:0): SETFEATURES SPIN-UP. ACB: ef 07 00 00 00 40 00 00 00 00 00 00
(aprobe0:ata1:0:0:0): CAM status: ATA Status Error
(aprobe0:ata1:0:0:0): ATA status: 51 (DRDY SERV ERR), error: 04 (ABRT )
(aprobe0:ata1:0:0:0): RES: 51 04 00 00 00 00 00 00 00 00 00
(aprobe0:ata1:0:0:0): Error 5, Retries exhausted
pass0 at ata0 bus 0 scbus0 target 0 lun 0
pass0: <VMware Virtual IDE Hard Drive 00000001> ATA-4 device
pass0: Serial Number 00000000000000000001
pass0: 33.300MB/s transfers (UDMA2, PIO 32768bytes)
ada0 at ata0 bus 0 scbus0 target 0 lun 0
ada0: <VMware Virtual IDE Hard Drive 00000001> ATA-4 device
ada0: Serial Number 00000000000000000001
ada0: 33.300MB/s transfers (UDMA2, PIO 32768bytes)
ada0: 8192MB (16777216 512 byte sectors: 15H 63S/T 16383C)
uhub0: 2 ports with 2 removable, self powered
GEOM: new disk ada0
Trying to mount root from ufs:/dev/ada0s1a
ct_to_ts([2010-02-23 17:14:34]) = 1266945274.000000000
start_init: trying /sbin/init
ts_to_ct(1266945276.750001955) = [2010-02-23 17:14:36]
nfslock: pseudo-device

dmesg 2010/02/21 source non ATA_CAM

Copyright (c) 1992-2010 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
         The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.0-CURRENT #0: Wed Feb 24 15:02:43 CET 2010
     toor@zaza.home.tbf:/home/obj/home/src/sys/VMWARE i386
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) M processor 1.86GHz (1859.09-MHz 686-class CPU)
   Origin = "GenuineIntel"  Id = 0x6d8  Stepping = 8
Features=0xfe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS>
   AMD Features=0x100000<NX>
real memory  = 268435456 (256 MB)
avail memory = 253231104 (241 MB)
module_register_init: MOD_LOAD (vesa, 0xc06e90d0, 0) error 6
acpi0: <PTLTD   RSDT> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82443BX (440 BX) host to PCI bridge> on hostb0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1050-0x105f at device 7.1 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x1060-0x107f irq 9 at
device 7.2 on pci0
uhci0: [ITHREAD]
usbus0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
pci0: <bridge> at device 7.3 (no driver attached)
vgapci0: <VGA-compatible display> port 0x1440-0x144f mem
0xf0000000-0xf7ffffff,0xec000000-0xec7fffff at device 15.0 on pci0
le0: <AMD PCnet-PCI> port 0x1080-0x10ff irq 11 at device 16.0 on pci0
le0: 16 receive buffers, 4 transmit buffers
le0: Ethernet address: 00:0c:29:69:06:7f
le0: [ITHREAD]
pcm0: <AudioPCI ES1371-A> port 0x1400-0x143f irq 10 at device 17.0 on pci0
pcm0: <Cirrus Logic CS4297A AC97 Codec>
pcm0: [ITHREAD]
pcm0: <Playback: DAC1,DAC2 / Record: ADC>
acpi_acad0: <AC Adapter> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model IntelliMouse, device ID 3
ppc0: <Parallel port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppc0: [ITHREAD]
ppbus0: <Parallel port bus> on ppc0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: [FILTER]
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
uart1: [FILTER]
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FILTER]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem
0xc0000-0xc7fff,0xc8000-0xc8fff,0xdc000-0xdffff,0xe0000-0xe3fff pnpid ORM0000 on
isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <12 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
Timecounter "TSC" frequency 1859088767 Hz quality 800
Timecounters tick every 10.000 msec
usbus0: 12Mbps Full Speed USB v1.0
ad0: 8192MB <VMware Virtual IDE Hard Drive 00000001> at ata0-master UDMA33
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
acd0: DVDR <VMware Virtual IDE CDROM Drive/00000001> at ata1-master UDMA33
(probe0:ata1:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe0:ata1:0:0:0): CAM status: SCSI Status Error
(probe0:ata1:0:0:0): SCSI status: Check Condition
(probe0:ata1:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
cd0 at ata1 bus 0 scbus1 target 0 lun 0
cd0: <SONY DVD+-RW DW-D56A PDS7> Removable CD-ROM SCSI-0 device
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
uhub0: 2 ports with 2 removable, self powered
Trying to mount root from ufs:/dev/ad0s1a


Thank you for your consideration

Claude Buisson





Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4B866B2A.1090608>