Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 4 Jun 2011 13:27:56 +0200
From:      Damien Fleuriot <ml@my.gd>
To:        "levitch@iglou.com" <levitch@iglou.com>
Cc:        "freebsd-questions@freebsd.org" <freebsd-questions@freebsd.org>
Subject:   Re: failure to create zfs storage pool
Message-ID:  <1700D703-4C8A-4793-9FCB-F792CCE4C646@my.gd>
In-Reply-To: <Pine.GSO.4.61.1106031635480.9153@shell1>
References:  <Pine.GSO.4.61.1106031635480.9153@shell1>

next in thread | previous in thread | raw e-mail | index | archive | help


On 3 Jun 2011, at 22:41, levitch@iglou.com wrote:

> Hello,
>=20
> After getting a couple of Hitachi 1T 7200 rpm drives, it seemed
> like time for ZFS on FreeBSD82, having not had Z file system
> subsequent to retiring whatever OpenSolaris was around.
>=20
> Basically, I followed this article:
>=20
> /doc/en_US.ISO8859-1/articles/remote-install/installation.html
>=20
> Previous to this, I had been using sysinstall.
>=20
> dd if=3D/dev/zero of=3D/dev/ad4 count=3D2
> dd if=3D/dev/zero of=3D/dev/ad6 count=3D2
>=20
> fdisk -BI ad4
> fdisk -BI ad6
>=20
> bsdlabel -wB /dev/ad4s1
> bsdlabel -wB /dev/ad6s1
>=20
> -------------------------------------------------
> bsdlabel -e /dev/ad4s1
>=20
>  a:  1G        16      4.2BSD  1024    8192    0
>  b:  5G        *       swap
>  c:  blah,blah
>  d:  20G       *       4.2BSD  2048    16384   0
>  e:  20G       *       4.2BSD  2048    16384   0
>  f:  *         *       unused  0       0
> -------------------------------------------------
>=20
> bsdlabel /dev/ad4s1 > /tmp/bsdlabel.txt && bsdlabel -R \
>        /dev/ad6s1 /tmp/bsdlabel.txt
>=20
> Now it was way past midnight, I cannot recall but might have run
> this:
>=20
> gmirror label -nb round-robin gm0 ad4s1 ad6s1
>=20
> I ran these:
>=20
> gmirror label root ad4s1a ad6s1a
> gmirror label var ad4s1d ad6s1d
> gmirror label usr ad4s1e ad6s1e
> gmirror label -F swap ad4s1b ad6s1b
> gmirror load
>=20
> newfs -b 8192 -f 1024 /dev/mirror/root
> newfs /dev/mirror/var
> newfs /dev/mirror/usr
>=20
> mount /dev/mirror/root /mnt
> mkdir /mnt/var /mnt/usr
> mount /dev/mirror/var /mnt/var
> mount /dev/mirror/usr /mnt/usr
>=20
> So I got the files with 'ftp passive' and followed the article all
> to the 'reboot' command.  Seemed okay.
>=20
> Now at the next page of the article:
>=20
> /doc/en_US.ISO8859-1/articles/remote-install/zfs.html
>=20
> Having read several articles and the zpool manual page, I still
> have failed to create any kind of ZFS storage pool.
>=20
> Darrel
> _______________________________________________
> freebsd-questions@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.or=
g"



How about you scrape the gmirror altogether and use ZFS's mirror instead ?

This way, you could also use the whole disks for ZFs instead of having to cr=
eate labels and slices...=



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1700D703-4C8A-4793-9FCB-F792CCE4C646>