Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 12 Aug 2002 12:35:17 -0700 (PDT)
From:      Matthew Jacob <mjacob@feral.com>
To:        "Schroeder, Aaron" <Aaron.Schroeder@qg.com>
Cc:        "'Wilko Bulte'" <wkb@freebie.xs4all.nl>, Marcin Gryszkalis <mgryszkalis@cerint.pl>, freebsd-alpha <freebsd-alpha@FreeBSD.ORG>, freebsd-scsi@FreeBSD.ORG
Subject:   RE: ISP Nvram [ was 'da driver problem?' ]
Message-ID:  <Pine.BSF.4.21.0208121234550.73304-100000@beppo>
In-Reply-To: <025596A38A894B45AFE62346A6BF47464E29AF@waexch1.qgraph.com>

next in thread | previous in thread | raw e-mail | index | archive | help

I'm sure he is. Unless properly segmented this usually doesn't work well.


On Mon, 12 Aug 2002, Schroeder, Aaron wrote:

> Wilko,
> 
> Are you thinking the same thing that I am? Wide and Narrow on the same bus =
> train wreck?
> 
> AJ
> 
> -----Original Message-----
> From: Wilko Bulte [mailto:wkb@freebie.xs4all.nl]
> Sent: Monday, August 12, 2002 2:27 PM
> To: Marcin Gryszkalis
> Cc: mjacob@feral.com; freebsd-alpha; freebsd-scsi@FreeBSD.ORG
> Subject: Re: ISP Nvram [ was 'da driver problem?' ]
> 
> 
> On Mon, Aug 12, 2002 at 09:06:03PM +0200, Marcin Gryszkalis wrote:
> > Matthew Jacob wrote:
> > > Interrupt the boot process and at the loader prompt do
> > > 	set isp_debug=0x1f
> > > and boot (or fail to boot) and send us the output.
> > > Or add
> > > 	set isp_no_nvram=0x1
> > > to keep NVRAM from being read.
> > 
> > I'll try... (I'll be able to do it on wednesday).
> > 
> > > You haven't said whether you're now loading isp firmware or not.
> > I loaded ispfw.ko (w/o any difference).
> > 
> > Preloaded elf kernel "kernel" at 0xfffffc0000600000.
> > Preloaded elf module "ispfw.ko" at 0xfffffc00006000c0.
> > ...
> > isp0: <Qlogic ISP 1020/1040 PCI SCSI Adapter> port 0x10000-0x100ff mem 
> > 0x82018000-0x82018fff irq 12 at device 9.0 on pci0
> > isp0: interrupting at CIA irq 12
> > isp0: invalid NVRAM header
> > da0 at isp0 bus 0 target 1 lun 0
> > da0: <DEC RZ29B    (C) DEC 0016> Fixed Direct Access SCSI-2 device
> > da0: 20.000MB/s transfers (10.000MHz, offset 12, 16bit), Tagged Queueing
> Enabled
> 
> Martin, are these drives inside StorageWorks SBB containers? [I lost the
> beginning of this thread]. If yes, do you have a mix of RZ29B-VA and
> RZ29B-VW drives? 
> 
> -- 
> |   / o / /_  _   				wilko@FreeBSD.org
> |/|/ / / /(  (_)  Bulte				Arnhem, the Netherlands
> 
> To Unsubscribe: send mail to majordomo@FreeBSD.org
> with "unsubscribe freebsd-alpha" in the body of the message
> 
> To Unsubscribe: send mail to majordomo@FreeBSD.org
> with "unsubscribe freebsd-alpha" in the body of the message
> 


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-scsi" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.21.0208121234550.73304-100000>