Date: Thu, 30 Aug 2001 01:00:21 -0400 From: Allen Landsidel <all@biosys.net> To: Warner Losh <imp@harmony.village.org> Cc: freebsd-mobile@FreeBSD.ORG Subject: Re: Getting closer.. Message-ID: <5.1.0.14.0.20010830004906.00c5fd48@rfnj.org> In-Reply-To: <200108300430.f7U4UKn17585@harmony.village.org> References: <Your message of "Thu, 30 Aug 2001 00:24:56 EDT." <5.1.0.14.0.20010830002045.00c53d18@rfnj.org> <5.1.0.14.0.20010830002045.00c53d18@rfnj.org> <Your message of "Wed, 29 Aug 2001 22:02:29 MDT." <200108300402.f7U42Tn17359@harmony.village.org> <200108300402.f7U42Tn17359@harmony.village.org> <5.1.0.14.0.20010829235424.00c34fd0@rfnj.org> <Your message of "Wed, 29 Aug 2001 21:46:57 EDT." <5.1.0.14.0.20010829214607.00bc6628@rfnj.org> <5.1.0.14.0.20010829214607.00bc6628@rfnj.org>
next in thread | previous in thread | raw e-mail | index | archive | help
Ok, latest patch.. dmesg reports two slots now, as does pccardc dumpcis, but only one is functional. Reboot is still not working correctly. Inserting/removing cards from slot 1 has no effect at all that I can determine. Slot 0 still works fine.. I do however still get two messages (for just about everything) when I insert the card. This may be because I booted in -v, or maybe that part is still not fixed.. you'd know better than I if boot -v would affect that. Here is the dmesg output.. I'm hitting the rack. Some time after work tomorrow I'll apply any more patches you may have come up with. ;) dmesg : pcic0: <Cirrus Logic PD6729/6730 PC-Card Controller> port 0xfcfc-0xfcff at device 19.0 on pci0 ID is 0x82 ID is 0x82 pcic0: Polling mode pccard0: <PC Card bus (classic)> on pcic0 pccard1: <PC Card bus (classic)> on pcic0 pcib1: <SiS 85c601> on motherboard pci1: <PCI bus> on pcib1 pcic-: pcic0 exists, using next available unit number .... pcic1: Cannot get I/O range pcic1 failed to probe at port 0xfcfc iomem 0xd8000 irq 9 drq 0 on isa0 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?5.1.0.14.0.20010830004906.00c5fd48>