Date: Wed, 1 Jan 2003 13:04:51 -0500 From: "Joshua Coombs" <jcoombs@gwi.net> To: <freebsd-questions@freebsd.org> Subject: 5.0RC2 Report Message-ID: <002601c2b1c0$47fd1240$fe01a8c0@ABERRATION>
next in thread | raw e-mail | index | archive | help
I've managed to get 5.0RC2 running on my iPaq IA1, using CompactFlash to
load the kernel, and a USB to IDE adapter to hold root. So far it's pretty
unstable and quirky, but I'm making progress.
DMESG:
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-RC2 #1: Wed Jan 1 11:53:44 EST 2003
root@dynamic-client-249.x386.net:/usr/src/sys/i386/compile/IPAQ
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0445000.
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 267274539 Hz
CPU: AMD-K6(tm) 3D processor (267.27-MHz 586-class CPU)
Origin = "AuthenticAMD" Id = 0x58c Stepping = 12
Features=0x8021bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX>
AMD Features=0xffffffff80000800<SYSCALL,3DNow!>
real memory = 31457280 (30 MB)
avail memory = 26083328 (24 MB)
Initializing GEOMetry subsystem
K6-family MTRR support enabled (2 registers)
npx0: <math processor> on motherboard
npx0: INT 16 interface
Using $PIR table, 7 entries at 0xc00fa040
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
agp0: <VIA 8501 (Apollo MVP4) host to PCI bridge> mem 0x50000000-0x53ffffff
at device 0.0 on pci0
pcib1: <PCIBIOS PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
pci0: <simple comms> at device 4.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686 ATA66 controller> port 0x1c40-0x1c4f at device 7.1 on
pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <VIA 83C572 USB controller> port 0x1c00-0x1c1f irq 11 at device 7.2
on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
umass0: DMI USB 2.0 Storage Adaptor, rev 2.00/11.10, addr 2
uhci1: <VIA 83C572 USB controller> port 0x1c20-0x1c3f irq 11 at device 7.3
on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
aue0: LINKSYS Inc. LINKSYS USB Adapter, rev 1.10/1.01, addr 2
aue0: Ethernet address: 00:04:5a:95:c0:bb
miibus0: <MII bus> on aue0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci0: <bridge, PCI-unknown> at device 7.4 (no driver attached)
pcm0: <VIA VT82C686A> port 0x1c5c-0x1c5f,0x1c58-0x1c5b,0x1400-0x14ff irq 10
at device 7.5 on pci0
pci0: <simple comms> at device 7.6 (no driver attached)
orm0: <Option ROMs> at iomem 0xec000-0xeffff,0xc0000-0xcffff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fdc1: cannot reserve I/O port range (1 ports)
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0f13> can't assign resources (irq)
Timecounters tick every 10.000 msec
ad0: 15MB <SanDisk SDP3B-16> [490/2/32] at ata0-master PIO1
ad2: 30MB <SanDisk SDCFB-32> [490/4/32] at ata1-master PIO1
MBREXT Slice 5 on ad0s2:
0000 00 01 41 a0 01 01 60 e9 20 00 00 00 60 12 00 00 |..A...`. ...`...|
[0] f:00 typ:1 s(CHS):160/1/65 e(CHS):233/1/96 s:32 l:4704
0000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <GENERIC GENERIC AQE.> Fixed Direct Access SCSI-0 device
da0: 1.000MB/s transfers
da0: 57259MB (117266688 512 byte sectors: 255H 63S/T 7299C)
The main issues I'm stuck with at the moment is I don't know how to hardwire
the kernel to go to da0s1a for root (have to tell it each boot by hand...)
and the USB IDE adapter appears to get hung after awhile, blowing up swap
and taking the system down with it. Rebooting the IPAQ clears it up just
fine, so it appears to be in the usb or umass driver, not the hardware.
(I've seen usb ethernet adapters do the same thing but that's improved as of
late.)
I'm using UFS2 btw, seems to be working fine on the USB drive.
Joshua Coombs
jcoombs@gwi.net
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?002601c2b1c0$47fd1240$fe01a8c0>