Date: Wed, 28 Aug 2013 20:28:15 +0300 From: Alexander <vsityz@gmail.com> To: Hans Petter Selasky <hps@bitfrost.no> Cc: Alexander Motin <mav@FreeBSD.org>, FreeBSD Current <freebsd-current@freebsd.org> Subject: Re: USB no proper work Message-ID: <521E332F.4000206@gmail.com> In-Reply-To: <521278BC.5010009@bitfrost.no> References: <520E8602.5050408@gmail.com> <520E8842.4020609@bitfrost.no> <520E8DE1.1090609@gmail.com> <520F16B6.1070106@bitfrost.no> <520FA7C3.2060708@FreeBSD.org> <520FF137.1020709@gmail.com> <520FF37D.6050002@bitfrost.no> <521277DB.4010200@gmail.com> <521278BC.5010009@bitfrost.no>
next in thread | previous in thread | raw e-mail | index | archive | help
19.08.2013 22:57, Hans Petter Selasky пишет: > On 08/19/13 21:54, Alexander Panyushkin wrote: >> 18.08.2013 01:04, Hans Petter Selasky пишет: >>> On 08/17/13 23:55, Alexander Panyushkin wrote: >>>> 17.08.2013 19:41, Alexander Motin пишет: >>>>> On 17.08.2013 09:22, Hans Petter Selasky wrote: >>> >>>> >>>> On USB device FAT-32 file system. When I removed flash drive, the >>>> file >>>> system has been unmounted. >>> >>> Hi, >>> >>> The problem might be in the GELI module then. Did you test that >>> Alexander ? >>> >>> Aug 16 23:23:43 scorpion kernel: GEOM_ELI: Device gpt/swap0.eli >>> created. >>> Aug 16 23:23:43 scorpion kernel: GEOM_ELI: Encryption: AES-XTS 128 >>> Aug 16 23:23:43 scorpion kernel: GEOM_ELI: Crypto: software >>> >>> Hint: You can set the following knob to disable the USB waiting at >>> reboot. >>> >>> hw.usb.no_shutdown_wait=1 >>> >> If set hw.usb.no_shutdown_wait = 1 >> Reboot successful, but if detach and attach again, USB device not >> detecting. > > This test is an indication that the USB stack is waiting for the CAM > layer to finish detaching its clients. Maybe you can turn on cam > debugging to figure out who is leaking a ref. Alexander Motin knows how. > > --HPS > Hi This is debug information ugen3.4: <Generic> at usbus3 umass0: <Generic USB2.0-CRW, class 0/0, rev 2.00/19.81, addr 4> on usbus3 da0 at umass-sim0 bus 0 scbus8 target 0 lun 0 da0: <Generic- SD/MMC 1.00> Removable Direct Access SCSI-0 device da0: 40.000MB/s transfers da0: 7580MB (15523840 512 byte sectors: 255H 63S/T 966C) da0: quirks=0x2<NO_6_BYTE> (noperiph:umass-sim0:0:0:0): debugging flags now 1 (da0:umass-sim0:0:0:0): PREVENT ALLOW MEDIUM REMOVAL. CDB: 1e 00 00 00 01 00 (da0:umass-sim0:0:0:0): CAM status: SCSI Status Error (da0:umass-sim0:0:0:0): SCSI status: Check Condition (da0:umass-sim0:0:0:0): SCSI sense: ILLEGAL REQUEST asc:24,0 (Invalid field in CDB) (da0:umass-sim0:0:0:0): Error 22, Unretryable error (da0:umass-sim0:0:0:0): PREVENT ALLOW MEDIUM REMOVAL. CDB: 1e 00 00 00 01 00 (da0:umass-sim0:0:0:0): CAM status: SCSI Status Error (da0:umass-sim0:0:0:0): SCSI status: Check Condition (da0:umass-sim0:0:0:0): SCSI sense: ILLEGAL REQUEST asc:24,0 (Invalid field in CDB) (da0:umass-sim0:0:0:0): Error 22, Unretryable error (da0:umass-sim0:0:0:0): PREVENT ALLOW MEDIUM REMOVAL. CDB: 1e 00 00 00 01 00 (da0:umass-sim0:0:0:0): CAM status: SCSI Status Error (da0:umass-sim0:0:0:0): SCSI status: Check Condition (da0:umass-sim0:0:0:0): SCSI sense: ILLEGAL REQUEST asc:24,0 (Invalid field in CDB) (da0:umass-sim0:0:0:0): Error 22, Unretryable error (da0:umass-sim0:0:0:0): PREVENT ALLOW MEDIUM REMOVAL. CDB: 1e 00 00 00 01 00 (da0:umass-sim0:0:0:0): CAM status: SCSI Status Error (da0:umass-sim0:0:0:0): SCSI status: Check Condition (da0:umass-sim0:0:0:0): SCSI sense: ILLEGAL REQUEST asc:24,0 (Invalid field in CDB) (da0:umass-sim0:0:0:0): Error 22, Unretryable error (da0:umass-sim0:0:0:0): PREVENT ALLOW MEDIUM REMOVAL. CDB: 1e 00 00 00 01 00 (da0:umass-sim0:0:0:0): CAM status: SCSI Status Error (da0:umass-sim0:0:0:0): SCSI status: Check Condition (da0:umass-sim0:0:0:0): SCSI sense: ILLEGAL REQUEST asc:24,0 (Invalid field in CDB) (da0:umass-sim0:0:0:0): Error 22, Unretryable error (da0:umass-sim0:0:0:0): PREVENT ALLOW MEDIUM REMOVAL. CDB: 1e 00 00 00 01 00 (da0:umass-sim0:0:0:0): CAM status: SCSI Status Error (da0:umass-sim0:0:0:0): SCSI status: Check Condition (da0:umass-sim0:0:0:0): SCSI sense: ILLEGAL REQUEST asc:24,0 (Invalid field in CDB) (da0:umass-sim0:0:0:0): Error 22, Unretryable error (da0:umass-sim0:0:0:0): PREVENT ALLOW MEDIUM REMOVAL. CDB: 1e 00 00 00 01 00 (da0:umass-sim0:0:0:0): CAM status: SCSI Status Error (da0:umass-sim0:0:0:0): SCSI status: Check Condition (da0:umass-sim0:0:0:0): SCSI sense: ILLEGAL REQUEST asc:24,0 (Invalid field in CDB) (da0:umass-sim0:0:0:0): Error 22, Unretryable error (da0:umass-sim0:0:0:0): PREVENT ALLOW MEDIUM REMOVAL. CDB: 1e 00 00 00 01 00 (da0:umass-sim0:0:0:0): CAM status: SCSI Status Error (da0:umass-sim0:0:0:0): SCSI status: Check Condition (da0:umass-sim0:0:0:0): SCSI sense: ILLEGAL REQUEST asc:24,0 (Invalid field in CDB) (da0:umass-sim0:0:0:0): Error 22, Unretryable error (da0:umass-sim0:0:0:0): PREVENT ALLOW MEDIUM REMOVAL. CDB: 1e 00 00 00 01 00 (da0:umass-sim0:0:0:0): CAM status: SCSI Status Error (da0:umass-sim0:0:0:0): SCSI status: Check Condition (da0:umass-sim0:0:0:0): SCSI sense: ILLEGAL REQUEST asc:24,0 (Invalid field in CDB) (da0:umass-sim0:0:0:0): Error 22, Unretryable error (da0:umass-sim0:0:0:0): PREVENT ALLOW MEDIUM REMOVAL. CDB: 1e 00 00 00 01 00 (da0:umass-sim0:0:0:0): CAM status: SCSI Status Error (da0:umass-sim0:0:0:0): SCSI status: Check Condition (da0:umass-sim0:0:0:0): SCSI sense: ILLEGAL REQUEST asc:24,0 (Invalid field in CDB) (da0:umass-sim0:0:0:0): Error 22, Unretryable error (da0:umass-sim0:0:0:0): PREVENT ALLOW MEDIUM REMOVAL. CDB: 1e 00 00 00 01 00 (da0:umass-sim0:0:0:0): CAM status: SCSI Status Error (da0:umass-sim0:0:0:0): SCSI status: Check Condition (da0:umass-sim0:0:0:0): SCSI sense: ILLEGAL REQUEST asc:24,0 (Invalid field in CDB) (da0:umass-sim0:0:0:0): Error 22, Unretryable error (da0:umass-sim0:0:0:0): PREVENT ALLOW MEDIUM REMOVAL. CDB: 1e 00 00 00 01 00 (da0:umass-sim0:0:0:0): CAM status: SCSI Status Error (da0:umass-sim0:0:0:0): SCSI status: Check Condition (da0:umass-sim0:0:0:0): SCSI sense: ILLEGAL REQUEST asc:24,0 (Invalid field in CDB) (da0:umass-sim0:0:0:0): Error 22, Unretryable error ugen3.4: <Generic> at usbus3 (disconnected) umass0: at uhub5, port 5, addr 4 (disconnected) (pass3:umass-sim0:0:0:0): Periph invalidated (sg0:umass-sim0:0:0:0): Periph invalidated (da0:umass-sim0:0:0:0): Periph invalidated (da0:umass-sim0:0:0:0): lost device - 0 outstanding, 2 refs (pass3:umass-sim0:0:0:0): Periph destroyed
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?521E332F.4000206>