Date: Thu, 1 Sep 2011 00:27:39 +0800 From: Adrian Chadd <adrian@freebsd.org> To: Edgar Martinez <emartinez@kbcnetworks.com> Cc: "freebsd-current@freebsd.org" <freebsd-current@freebsd.org> Subject: No valid timers found on ALIX (was Re: 9.0-BETA2 - Kernel Panic on ALIX) Message-ID: <CAJ-VmomFugwusmFROSC6eQ=s=QB_em-rrPy8xjGoVXDdEGJtvA@mail.gmail.com>
next in thread | raw e-mail | index | archive | help
Just to clarify for Edgar, His 9.0 build isn't finding any valid timers; hence why the thing panics upon boot. Since I've got a few Alix boards I'd like to use for 11n testing, i'd like to know how to make this work. Does anyone know the relevant magic to see which timers are available, and force enable something that'll work? Adrian On 31 August 2011 22:33, Edgar Martinez <emartinez@kbcnetworks.com> wrote: > GDB: no debug ports present > KDB: debugger backends: ddb > KDB: current backend: ddb > Copyright (c) 1992-2011 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > =A0 =A0 =A0 =A0The Regents of the University of California. All rights re= served. > FreeBSD is a registered trademark of The FreeBSD Foundation. > FreeBSD 9.0-BETA2 #0: Wed Aug 31 06:47:57 PDT 2011 > =A0 =A0root@chuckles.local:/usr/obj/usr/src/sys/MESH i386 > WARNING: DIAGNOSTIC option enabled, expect reduced performance. > CPU: Geode(TM) Integrated Processor by AMD PCS (498.06-MHz 586-class CPU) > =A0Origin =3D "AuthenticAMD" =A0Id =3D 0x5a2 =A0Family =3D 5 =A0Model =3D= a =A0Stepping =3D 2 > =A0Features=3D0x88a93d<FPU,DE,PSE,TSC,MSR,CX8,SEP,PGE,CMOV,CLFLUSH,MMX> > =A0AMD Features=3D0xc0400000<MMX+,3DNow!+,3DNow!> > real memory =A0=3D 268435456 (256 MB) > avail memory =3D 223870976 (213 MB) > pnpbios: Bad PnP BIOS data checksum > wlan: mac acl policy registered > K6-family MTRR support enabled (2 registers) > cryptosoft0: <software crypto> on motherboard > pcib0: <Host to PCI bridge> pcibus 0 on motherboard > pci0: <PCI bus> on pcib0 > Geode LX: PC Engines ALIX.3 v0.99h tinyBIOS V1.4a (C)1997-2007 > glxsb0: <AMD Geode LX Security Block (AES-128-CBC, RNG)> mem 0xefff4000-0= xefff7fff irq 9 at device 1.2 on pci0 > vr0: <VIA VT6105M Rhine III 10/100BaseTX> port 0x1000-0x10ff mem 0xe00000= 00-0xe00000ff irq 10 at device 9.0 on pci0 > vr0: Quirks: 0x2 > vr0: Revision: 0x96 > miibus0: <MII bus> on vr0 > ukphy0: <Generic IEEE 802.3u media interface> PHY 1 on miibus0 > ukphy0: =A0none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > vr0: Ethernet address: 00:0d:b9:19:57:e4 > pci0: <network, ethernet> at device 12.0 (no driver attached) > isab0: <PCI-ISA bridge> port 0x6000-0x6007,0x6100-0x61ff,0x6200-0x623f,0x= 9d00-0x9d7f,0x9c00-0x9c3f at device 15.0 on pci0 > isa0: <ISA bus> on isab0 > atapci0: <AMD CS5536 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x1= 77,0x376,0xff00-0xff0f at device 15.2 on pci0 > ata0: <ATA channel 0> on atapci0 > ata1: <ATA channel 1> on atapci0 > pci0: <serial bus, USB> at device 15.4 (no driver attached) > pci0: <serial bus, USB> at device 15.5 (no driver attached) > cpu0 on motherboard > pmtimer0 on isa0 > orm0: <ISA Option ROM> at iomem 0xe0000-0xea7ff pnpid ORM0000 on isa0 > uart0: <16550 or compatible> at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 > uart0: console (38400,n,8,1) > uart1: <16550 or compatible> at port 0x2f8-0x2ff irq 3 on isa0 > panic: No usable event timer found! > KDB: stack backtrace: > X_db_sym_numargs(c07205cd) at 0xc044c705 =3D X_db_sym_numargs+0x135 > kdb_backtrace(c2820d38,1,fffffff,c2820d40,c06d0d6a,...) at 0xc056e498 =3D= kdb_backtrace+0x28 > panic(c0746b08,c074bfe8,fffffff,c2820d48,c06d6378,...) at 0xc05460e2 =3D = panic+0xa2 > cpu_initclocks_bsp(c2820d60,c050834b,c078f8b4,c0718b46,0,...) at 0xc06d0d= 6a =3D cpu_initclocks_bsp+0xfa > cpu_initclocks(c078f8b4,c0718b46,0,0,c2820d78,...) at 0xc06d6378 =3D cpu_= initclocks+0x8 > hardclock_sync(0,281ec00,281e000,2825000,0,...) at 0xc050834b =3D hardclo= ck_sync+0x3b > mi_startup() at 0xc0506229 =3D mi_startup+0xa9 > btext() at 0xc043f7e5 =3D btext+0x95 > KDB: enter: panic > [ thread pid 0 tid 100000 ] > Stopped at =A0 =A0 =A00xc056e2a4 =3D kdb_enter+0x34: =A0 =A0movl =A0 =A0$= 0,0xc079f874 =3D kdb_why > db> > > _______________________________________________ > freebsd-current@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-current > To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org= " >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAJ-VmomFugwusmFROSC6eQ=s=QB_em-rrPy8xjGoVXDdEGJtvA>