Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 27 Dec 2007 15:05:10 +0000
From:      Hugo Silva <hugo@barafranca.com>
To:        jy-p@fixedpointgroup.com, freebsd-questions@freebsd.org
Subject:   Re: zfs-geli-zfs: opinions/suggestions
Message-ID:  <4773BF26.6010602@barafranca.com>
In-Reply-To: <4773176E.7060702@fixedpointgroup.com>
References:  <4773176E.7060702@fixedpointgroup.com>

next in thread | previous in thread | raw e-mail | index | archive | help
Jacob Yocom-Piatt wrote:
> lo all,
>
> have a freebsd 7.0-beta4 machine attached to an external disk 
> enclosure and would like feedback on the following setup: have RAID-Z 
> on 4 disks, ZFS volume that takes up entire RAID-Z, use ZVOL from 
> volume for encryption via geli, use .eli (decrypted) device to make 
> another ZFS pool. the idea being "no time/resources wasted doing fscks 
> plus encryption sans hardware RAID".

Unless I'm misunderstanding your objective, geli'ing the disks and 
creating a pool ontop of the encrypted disks (zpool create secure raidz 
da0.eli da1.eli da2.eli da3.eli) would also work, and would be far 
easier to maintain. Your data would still be encrypted and you would 
still need to provide the passphrase to make the pool accessible.

Best regards,

Hugo
>
> translated to commands this reads:
>
> # zpool create p_a raidz /dev/mfid1 /dev/mfid2 /dev/mfid3 /dev/mfid4
> # zpool list
> NAME                    SIZE    USED   AVAIL    CAP  HEALTH     ALTROOT
> p_a                    2.72T   4.02G   2.71T     0%  ONLINE     -
> # zfs create -V 2048g p_a/vol
> # geli init -K /root/p_a.key -s 4096 -l 256 /dev/zvol/p_a/vol
> # geli attach -k /root/p_a.key /dev/zvol/p_a/vol
> # zpool create a /dev/zvol/p_a/vol.eli
>
> i got a reboot while scp-ing some files to /a (only got ~3 GB in) from 
> another machine with the above setup. am currently waiting far too 
> long for a rm -R <directory> to complete under /a. will test if any of 
> this behavior is repeatable.
>
> i welcome opinions or suggestions on the stability of such a setup 
> (ZFS-geli-ZFS) and if this is not stable, as the reboot i just 
> experienced would indicate, suggestions on alternative configurations 
> that allow use of geli and minimize or eliminate fsck time. i do have 
> a preference for no hardware RAID since it ties us to a particular 
> card. will furnish a proper bug report if the reboots are repeatable 
> in the aforementioned scenario.
>
> NOTE: please CC me since i am not yet subscribed to this list
>
> cheers,
> jake
>




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4773BF26.6010602>