Date: Sun, 27 Nov 2005 01:22:10 +0000 From: Tim Hawkins <timh@contentspace1.demon.co.uk> To: freebsd-stable@freebsd.org Subject: Dell SC600 fileserver and 6.0 Release Message-ID: <200511270122.11338.timh@contentspace1.demon.co.uk>
next in thread | raw e-mail | index | archive | help
Has anybody had any joy in getting 6.0 to install on a Dell
SC600 server.
The system runs fine under 5.3 and 5.4, but hangs just after attempting to
init the atapi intefaces on 6.0.
The only unusal thing I can see is that the system has 3 IDE channels. There
are HD's on both master and slave of channel 0, nothing on channel 1
and a cd rom on the master of channel 2.
Here is a dump of the dmesg, uname and pciconf for the 5.3 boot.
uname -a
FreeBSD bsd02.contentspace.priv 5.3-RELEASE FreeBSD 5.3-RELEASE #0: Fri Nov 5
04:19:18 UTC 2004
root@harlow.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC i386
dmessg
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.3-RELEASE #0: Fri Nov 5 04:19:18 UTC 2004
root@harlow.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Celeron(R) CPU 1.80GHz (1799.81-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf13 Stepping = 3
Features=0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>
real memory = 805240832 (767 MB)
avail memory = 778231808 (742 MB)
ACPI APIC Table: <DELL PE600SC >
ioapic0: Changing APIC ID to 1
ioapic1: Changing APIC ID to 2
ioapic2: Changing APIC ID to 3
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0 <Version 1.1> irqs 0-15 on motherboard
ioapic1 <Version 1.1> irqs 16-31 on motherboard
ioapic2 <Version 1.1> irqs 32-47 on motherboard
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <DELL PE600SC> on motherboard
acpi0: Power Button (fixed)
acpi0: reservation of 800, 1a (4) failed
acpi_timer0: couldn't allocate resource (port 0x808)
cpu0: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> on acpi0
pci0: <ACPI PCI bus> on pcib0
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port
0xecc0-0xecff mem 0xfe100000-0xfe11ffff irq 17 at device 2.0 on pci0
em0: Ethernet address: 00:c0:9f:23:ac:d9
em0: Speed:N/A Duplex:N/A
pci0: <display, VGA> at device 8.0 (no driver attached)
atapci0: <ServerWorks CSB6 UDMA66 controller> port
0x900-0x90f,0x36c-0x36f,0x168-0x16f,0x3ec-0x3ef,0x1e8-0x1ef irq 11 at device
14.0 on pci0
ata2: channel #0 on atapci0
ata3: channel #1 on atapci0
atapci1: <ServerWorks CSB6 UDMA100 controller> port
0x8b0-0x8bf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 15.1 on pci0
ata0: channel #0 on atapci1
ata1: channel #1 on atapci1
ohci0: <OHCI (generic) USB controller> mem 0xfe120000-0xfe120fff irq 5 at
device 15.2 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
isab0: <PCI-ISA bridge> at device 15.3 on pci0
isa0: <ISA bus> on isab0
fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse Explorer, device ID 4
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
ppc0: <ECP parallel printer port> port 0x778-0x77f,0x378-0x37f irq 7 drq 1 on
acpi0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
acpi_timer0: couldn't allocate resource (port 0x808)
orm0: <ISA Option ROMs> at iomem 0xec000-0xeffff,0xc0000-0xc7fff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1799807212 Hz quality 800
Timecounters tick every 10.000 msec
ad0: 38146MB <IC35L040AVVA07-0/VA2OA56A> [77504/16/63] at ata0-master UDMA100
ad1: 114498MB <SAMSUNG SP1203N/TL100-24> [232632/16/63] at ata0-slave UDMA100
Interrupt storm detected on "irq11: atapci0"; throttling interrupt source
acd0: CDROM <SAMSUNG CD-ROM SC-148C/B105> at ata2-master UDMA33
Mounting root from ufs:/dev/ad0s1a
em0: Link is up 100 Mbps Full Duplex
pciconf -l -v
hostb0@pci0:0:0: class=0x060000 card=0x00000000 chip=0x00171166 rev=0x32
hdr=0x00
vendor = 'ServerWorks (Was: Reliance Computer Corp)'
device = 'CMIC-SL'
class = bridge
subclass = HOST-PCI
hostb1@pci0:0:1: class=0x060000 card=0x00000000 chip=0x00171166 rev=0x00
hdr=0x00
vendor = 'ServerWorks (Was: Reliance Computer Corp)'
device = 'CMIC-SL'
class = bridge
subclass = HOST-PCI
em0@pci0:2:0: class=0x020000 card=0x01341028 chip=0x100e8086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82540EM Gigabit Ethernet Controller'
class = network
subclass = ethernet
none0@pci0:8:0: class=0x030000 card=0x01341028 chip=0x47521002 rev=0x27
hdr=0x00
vendor = 'ATI Technologies Inc.'
device = 'Rage XL PCI'
class = display
subclass = VGA
atapci0@pci0:14:0: class=0x010187 card=0x01341028 chip=0x02171166 rev=0xa0
hdr=0x00
vendor = 'ServerWorks (Was: Reliance Computer Corp)'
device = 'OSB6 PCI EIDE Controller (Tertiary)'
class = mass storage
subclass = ATA
hostb2@pci0:15:0: class=0x060000 card=0x02011166 chip=0x02031166 rev=0xa0
hdr=0x00
vendor = 'ServerWorks (Was: Reliance Computer Corp)'
device = 'CSB6 PCI to ISA Bridge'
class = bridge
subclass = HOST-PCI
atapci1@pci0:15:1: class=0x01018a card=0x41341028 chip=0x02131166 rev=0xa0
hdr=0x00
vendor = 'ServerWorks (Was: Reliance Computer Corp)'
device = 'OSB6/CSB6 PCI EIDE Controller'
class = mass storage
subclass = ATA
ohci0@pci0:15:2: class=0x0c0310 card=0x02201166 chip=0x02211166 rev=0x05
hdr=0x00
vendor = 'ServerWorks (Was: Reliance Computer Corp)'
device = 'OSB6 OHCI Compliant USB Controller'
class = serial bus
subclass = USB
isab0@pci0:15:3: class=0x060100 card=0x02301166 chip=0x02271166 rev=0x00
hdr=0x00
vendor = 'ServerWorks (Was: Reliance Computer Corp)'
device = 'CSB6 PCI Bridge'
class = bridge
subclass = PCI-ISA
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200511270122.11338.timh>