Date: Tue, 25 May 1999 22:42:25 -0700 From: Kent Stewart <kstewart@3-cities.com> To: -= Travis Sarbin =- <vortex@digital-galaxy.net> Cc: freebsd-questions@FreeBSD.ORG Subject: Re: WDC1 --- wont recognize, please help Message-ID: <374B89C1.26A49C2F@3-cities.com> References: <001101bea739$49f092b0$0100000a@digitalgalaxy.net>
next in thread | previous in thread | raw e-mail | index | archive | help
-= Travis Sarbin =- wrote: > > Anyone ever had any problems getting WDC1 to recognize on an AMDK6? We cant > get ours to work right.... :/ here's what I have... terribly sorry if this > is posting too much information... im sorta new to having to grovel and beg > for advice on some of this stuff... im severely pressed for time.... :/ > Thanks!! You have to enable the secondary controller in the BIOS. You have the drive allocation, which is usally auto...auto, and then you have this additional setting that depends on the type of BIOS. You will also want to enable dma, 32-bit transfers, and multi-sector reads. See the flags in the LINT file in /sys/i386/conf. Kent Kent > > - Travis Sarbin > > Probing for devices on PCI bus 0: > chip0: <Host to PCI bridge (vendor=10b9 device=1531)> rev 0xb3 on pci0.0.0 > chip1: <PCI to ISA bridge (vendor=10b9 device=1533)> rev 0xb4 on pci0.2.0 > xl0: <3Com 3c900 Etherlink XL 10BaseT> rev 0x00 int a irq 11 on pci0.5.0 > xl0: Ethernet address: 00:10:4b:cd:aa:f0 > xl0: selecting 10baseT transceiver, half duplex > ide_pci0: <PCI IDE controller (busmaster capable)> rev 0x20 int a irq 0 on > pci0. > 11.0 > ide_pci: controller is simplex, no DMA on secondary channel > Probing for devices on the ISA bus: > sc0 at 0x60-0x6f irq 1 on motherboard > sc0: VGA color <16 virtual consoles, flags=0x0> > sio0: configured irq 4 not in bitmap of probed irqs 0 > sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa > sio0: type 8250 > sio1: configured irq 3 not in bitmap of probed irqs 0 > sio1 not found at 0x2f8 > fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa > fdc0: FIFO enabled, 8 bytes threshold > fd0: 1.44MB 3.5in > wdc0 at 0x1f0-0x1f7 irq 14 on isa > wdc0: unit 0 (wd0): <Maxtor 7540 AV> > wd0: 514MB (1054368 sectors), 1046 cyls, 16 heads, 63 S/T, 512 B/S > wdc0: unit 1 (wd1): <WDC AC28400R> > wd1: 8063MB (16514064 sectors), 16383 cyls, 16 heads, 63 S/T, 512 B/S > wdc1 not found at 0x170 > npx0 on motherboard > npx0: INT 16 interface > changing root device to wd0s1a > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message -- Kent Stewart Richland, WA mailto:kstewart@3-cities.com http://www.3-cities.com/~kstewart/index.html SETI (Search for Extraterrestrial Intelligence) @ Home http://setiathome.ssl.berkeley.edu/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?374B89C1.26A49C2F>