Date: Tue, 16 Jun 2009 02:40:12 +0200 From: martinko <gamato@users.sf.net> To: freebsd-multimedia@freebsd.org Subject: Re: snd_hda: ALC888/1200 and mixer empty Message-ID: <h16pld$r13$1@ger.gmane.org> In-Reply-To: <20090615211229.GA83315@keira.kiwi-computer.com> References: <h16aoq$fd5$1@ger.gmane.org> <20090615211229.GA83315@keira.kiwi-computer.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Rick C. Petty wrote: > On Mon, Jun 15, 2009 at 10:26:02PM +0200, martinko wrote: >> Hallo, >> >> I've got issues with snd_hda(4) driver. According to Windows driver >> I've got Realtek ALC1200 but FreeBSD says it's ALC888. mixer(8) doesn't >> show any devices and applications complain about it. However, if I just >> cat sth.wav > /dev/dsp I can hear a sound/noise. The listing follows.. > > Have you tried the mixer for each pcm device? e.g. > > mixer -f /dev/pcm4 > There are no /dev/pcm* device nodes, but there are mixer nodes: $ ll /dev/mixer* crw-rw-rw- 1 root wheel 0, 88 Jun 15 19:45 /dev/mixer0 crw-rw-rw- 1 root wheel 0, 89 Jun 15 19:45 /dev/mixer1 crw-rw-rw- 1 root wheel 0, 90 Jun 15 19:45 /dev/mixer2 crw-rw-rw- 1 root wheel 0, 91 Jun 15 19:45 /dev/mixer3 crw-rw-rw- 1 root wheel 0, 92 Jun 15 19:45 /dev/mixer4 $ mixer -f /dev/mixer0 $ mixer -f /dev/mixer1 Mixer vol is currently set to 75:75 Mixer pcm is currently set to 75:75 Mixer speaker is currently set to 75:75 Mixer line is currently set to 75:75 Mixer mic is currently set to 0:0 Mixer mix is currently set to 0:0 Mixer rec is currently set to 0:0 Recording source: mic $ mixer -f /dev/mixer2 Mixer vol is currently set to 75:75 Mixer pcm is currently set to 75:75 Mixer speaker is currently set to 75:75 Mixer mix is currently set to 0:0 Mixer rec is currently set to 0:0 Mixer monitor is currently set to 75:75 Recording source: $ mixer -f /dev/mixer3 $ mixer -f /dev/mixer4 $ mixer -f /dev/mixer However, digital "devices" have no mixers as you can see. M.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?h16pld$r13$1>