Date: Wed, 11 Jul 2001 01:26:29 -0700 (PDT) From: Shizuka Kudo <shizukakudo_99@yahoo.com> To: freebsd-stable@freebsd.org Subject: wi0: watchdog timeout with latest pccard MFC Message-ID: <20010711082629.89379.qmail@web11406.mail.yahoo.com>
next in thread | raw e-mail | index | archive | help
>All, >I have cvsup the latest pccard MFC (including the two >missing files). I have no >problem booting up with new kernel, but received the >above error when IP address was assigned to wi0 >I didn't anticipated same problem when using >"pcic-stable.diff.6" patches from Warner. >Any idea how this happen? > >Note: I have PCMCIA-PCI adaptor on my ASUS CUSL2 >(i815e) MB. > I already reserved int 10 for the PCI adaptor & >wi0, and included "-I -i 10" in pccardd_flags Here's the dmesg output Physical memory chunk(s): 0x00001000 - 0x0009efff, 647168 bytes (158 pages) 0x003b8000 - 0x0fee2fff, 263368704 bytes (64299 pages) avail memory = 256643072 (250628K bytes) bios32: Found BIOS32 Service Directory header at 0xc00f13e0 bios32: Entry = 0xf0ba0 (c00f0ba0) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xda0 pnpbios: Found PnP BIOS data at 0xc00fbe30 pnpbios: Entry = f0000:be60 Rev = 1.0 pnpbios: OEM ID cd041 Other BIOS signatures found: ACPI: 000f7350 Preloaded elf kernel "kernel.test" at 0xc0392000. Pentium Pro MTRR support enabled md0: Malloc disk Creating DISK md0 pci_open(1): mode 1 addr port (0x0cf8) is 0x8000005c pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=11308086) npx0: <math processor> on motherboard npx0: INT 16 interface pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=11308086) pcib0: <Host to PCI bridge> on motherboard found-> vendor=0x8086, dev=0x1130, revid=0x02 class=06-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 found-> vendor=0x8086, dev=0x1132, revid=0x02 class=03-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=11 map[10]: type 1, range 32, base f8000000, size 26 map[14]: type 1, range 32, base f7800000, size 19 found-> vendor=0x8086, dev=0x244e, revid=0x01 class=06-04-00, hdrtype=0x01, mfdev=0 subordinatebus=1 secondarybus=1 found-> vendor=0x8086, dev=0x2440, revid=0x01 class=06-01-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 found-> vendor=0x8086, dev=0x244b, revid=0x01 class=01-01-80, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[20]: type 1, range 32, base 0000b800, size 4 found-> vendor=0x8086, dev=0x2442, revid=0x01 class=0c-03-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=d, irq=9 map[20]: type 1, range 32, base 0000b400, size 5 found-> vendor=0x8086, dev=0x2443, revid=0x01 class=0c-05-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=b, irq=5 map[20]: type 1, range 32, base 0000e800, size 4 found-> vendor=0x8086, dev=0x2444, revid=0x01 class=0c-03-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=c, irq=9 map[20]: type 1, range 32, base 0000b000, size 5 pci0: <PCI bus> on pcib0 pci0: <Intel model 1132 VGA-compatible display device> (vendor=0x8086, dev=0x1132) at 2.0 irq 11 pcib1: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on pci0 found-> vendor=0x104c, dev=0xac1c, revid=0x01 class=06-07-00, hdrtype=0x02, mfdev=1 subordinatebus=0 secondarybus=0 intpin=a, irq=10 found-> vendor=0x104c, dev=0xac1c, revid=0x01 class=06-07-00, hdrtype=0x02, mfdev=1 subordinatebus=0 secondarybus=0 intpin=a, irq=10 found-> vendor=0x104c, dev=0x8020, revid=0x00 class=0c-00-10, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=9 map[10]: type 1, range 32, base f7000000, size 11 map[14]: type 1, range 32, base f6800000, size 14 found-> vendor=0x1102, dev=0x0002, revid=0x08 class=04-01-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 intpin=a, irq=9 map[10]: type 1, range 32, base 0000d800, size 5 found-> vendor=0x1102, dev=0x7002, revid=0x08 class=09-80-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 map[10]: type 1, range 32, base 0000d400, size 3 pci1: <PCI bus> on pcib1 pcic-pci0: <TI PCI-1225 PCI-CardBus Bridge> irq 10 at device 10.0 on pci1 pcic-pci0: TI12XX PCI Config Reg: [pwr save][pci only] pcic-pci0: Legacy address set to 0x3e0 PCI Config space: 00: ac1c104c 02100003 06070001 00824008 10: 00000000 020000a0 00000000 00000000 20: 00000000 00000000 00000000 00000000 30: 00000000 00000000 00000000 03c0010a 40: 2023133f 000003e1 00000000 00000000 50: 00000000 00000000 00000000 00000000 60: 00000000 00000000 00000000 00000000 70: 00000000 00000000 00000000 00000000 80: 28449060 00000000 00000000 0cc07d92 90: 606000c0 00000000 00000000 00000000 Cardbus Socket registers: 00: f000ef6f: f000ef6f: f000e2c3: f000ef6f: 10: f000ef6f: f000ff54: f0008008: f000ef6f: ExCa registers: 00: eb 88 d5 43 30 d2 66 f7 f3 88 d7 5a 66 3d ff 03 10: 00 00 fb 77 44 86 c4 c0 c8 02 08 e8 40 91 88 fe 20: 28 e0 8a 66 02 38 e0 72 02 88 e0 bf 05 00 c4 5e 30: 04 50 b4 02 cd 13 5b 73 0a 4f 74 1c 30 e4 cd 13 pcic-pci1: <TI PCI-1225 PCI-CardBus Bridge> irq 10 at device 10.1 on pci1 pcic-pci1: TI12XX PCI Config Reg: [pwr save][pci only] PCI Config space: 00: ac1c104c 02100003 06070001 00824008 10: 00000000 020000a0 00000000 00000000 20: 00000000 00000000 00000000 00000000 30: 00000000 00000000 00000000 03c0010a 40: 2023133f 000003e1 00000000 00000000 50: 00000000 00000000 00000000 00000000 60: 00000000 00000000 00000000 00000000 70: 00000000 00000000 00000000 00000000 80: 28449060 00000000 00000000 0cc07d92 90: 606000c0 00000000 00000000 00000000 Cardbus Socket registers: 00: f000ef6f: f000ef6f: f000e2c3: f000ef6f: 10: f000ef6f: f000ff54: f0008008: f000ef6f: ExCa registers: 00: eb 88 d5 43 30 d2 66 f7 f3 88 d7 5a 66 3d ff 03 10: 00 00 fb 77 44 86 c4 c0 c8 02 08 e8 40 91 88 fe 20: 28 e0 8a 66 02 38 e0 72 02 88 e0 bf 05 00 c4 5e 30: 04 50 b4 02 cd 13 5b 73 0a 4f 74 1c 30 e4 cd 13 pci1: <unknown card> (vendor=0x104c, dev=0x8020) at 12.0 irq 9 pcm0: <Creative EMU10K1> port 0xd800-0xd81f irq 9 at device 14.0 on pci1 emu: setmap (21000, 800), nseg=1, error=0 emu: setmap (3b8000, 1000), nseg=1, error=0 pcm0: ac97 codec id 0x83847609 (SigmaTel STAC9721) pcm0: ac97 codec features 18 bit DAC, 18 bit ADC, 5 bit master volume, SigmaTel 3D Enhancement pcm0: ac97 primary codec extended features AMAP emu: setmap (3f8000, 1000), nseg=1, error=0 emu: setmap (438000, 1000), nseg=1, error=0 emu: setmap (478000, 1000), nseg=1, error=0 emu: setmap (4b8000, 1000), nseg=1, error=0 pcm: setmap 4f8000, 1000; 0xcb42c000 -> 4f8000 pcm: setmap 538000, 1000; 0xcb46c000 -> 538000 pcm: setmap 578000, 1000; 0xcb4ac000 -> 578000 isab0: <Intel 82801BA/BAM (ICH2) PCI to LPC bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH2 ATA100 controller> port 0xb800-0xb80f at device 31.1 on pci0 ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xb800 ata0: mask=03 status0=50 status1=50 ata0: mask=03 ostat0=50 ostat2=50 ata0-master: ATAPI probe a=00 b=00 ata0-slave: ATAPI probe a=00 b=00 ata0: mask=03 status0=50 status1=50 ata0-master: ATA probe a=01 b=a5 ata0-slave: ATA probe a=01 b=a5 ata0: devices=03 ata0: at 0x1f0 irq 14 on atapci0 ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xb808 ata1: mask=03 status0=50 status1=00 ata1: mask=03 ostat0=50 ostat2=00 ata1-master: ATAPI probe a=14 b=eb ata1-slave: ATAPI probe a=00 b=00 ata1: mask=03 status0=00 status1=00 ata1: devices=04 ata1: at 0x170 irq 15 on atapci0 uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0xb400-0xb41f irq 9 at device 31.2 on pci0 using shared irq9. usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered ichsmb0: <Intel 82801BA (ICH2) SMBus controller> port 0xe800-0xe80f irq 5 at device 31.3 on pci0 smbus0: <System Management Bus> on ichsmb0 smb0: <SMBus general purpose I/O> on smbus0 uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port 0xb000-0xb01f irq 9 at device 31.4 on pci0 usb1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhub2: ALCOR Generic USB Hub, class 9/0, rev 1.10/1.00, addr 2 uhub2: 4 ports with 4 removable, self powered ata-: ata0 exists, using next available unit number ata-: ata1 exists, using next available unit number Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: <Option ROM> at iomem 0xc0000-0xcbfff on isa0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ata2 failed to probe at port 0x1f0 irq 14 on isa0 ata3 failed to probe at port 0x170 irq 15 on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000 psm0: current command byte:0047 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons psm0: config:00000000, flags:00000000, packet size:3 psm0: syncmask:c0, syncbits:00 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) pcic0: <Intel i82365SL-DF> at port 0x3e0 iomem 0xd0000 on isa0 pcic0: Polling mode pccard0: <PC Card bus (classic)> on pcic0 stat is 4c pcic1: not probed (disabled) sio0: irq maps: 0x241 0x251 0x241 0x241 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: irq maps: 0x241 0x249 0x241 0x241 sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: parallel port found at 0x378 ppc0: using extended I/O port range ppc0: ECP SPP ECP+EPP SPP ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/9 bytes threshold plip0: <PLIP network interface> on ppbus0 bpf: lp0 attached lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 isa_probe_children: probing PnP devices BIOS Geometries: 0:03fffe3f 0..1023=1024 cylinders, 0..254=255 heads, 1..63=63 sectors 1:03fffe3f 0..1023=1024 cylinders, 0..254=255 heads, 1..63=63 sectors 0 accounted for Device configuration finished. bpf: sl0 attached bpf: lo0 attached bpf: ppp0 attached new masks: bio 68c240, tty 63129a, net 67129a ata0-master: success setting UDMA5 on Intel chip Creating DISK ad0 ad0: <IBM-DTLA-307030/TX4OA50C> ATA-5 disk at ata0-master ad0: 29314MB (60036480 sectors), 59560 cyls, 16 heads, 63 S/T, 512 B/S ad0: 16 secs/int, 1 depth queue, UDMA100 ad0: piomode=4 dmamode=2 udmamode=5 cblid=1 ad0: 29314MB <IBM-DTLA-307030> [59560/16/63] at ata0-master UDMA100 ata0-slave: success setting UDMA5 on Intel chip Creating DISK ad1 ad1: <IBM-DTLA-307030/TX4OA60A> ATA-5 disk at ata0-slave ad1: 29314MB (60036480 sectors), 59560 cyls, 16 heads, 63 S/T, 512 B/S ad1: 16 secs/int, 1 depth queue, UDMA100 ad1: piomode=4 dmamode=2 udmamode=5 cblid=1 ad1: 29314MB <IBM-DTLA-307030> [59560/16/63] at ata0-slave UDMA100 ata1-master: piomode=4 dmamode=2 udmamode=-1 dmaflag=1 ata1-master: success setting PIO4 on generic chip acd0: <SONY CD-RW CRX120E/1.0j> CD-RW drive at ata1 as master acd0: read 4134KB/s (4134KB/s) write 689KB/s (689KB/s), 2048KB buffer, PIO4 acd0: Reads: CD-R, CD-RW, CD-DA stream, packet acd0: Writes: CD-R, CD-RW, test write acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray acd0: Medium: CD-R 120mm data disc loaded, unlocked Mounting root from ufs:/dev/ad0s4a ad0s1: type 0xb, start 63, end = 15020774, size 15020712 : OK ad0s2: type 0x83, start 15020775, end = 30057614, size 15036840 : OK ad0s3: type 0xb5, start 30057615, end = 45094454, size 15036840 : OK ad0s4: type 0xa5, start 45094455, end = 60034904, size 14940450 : OK start_init: trying /sbin/init pccard: card inserted, slot 0 ad1s1: type 0xc, start 63, end = 60034904, size 60034842 : OK splash: image decoder found: logo_saver pcic: I/O win 0 flags 15 240-27f pcic: I/O win 0 flags 5 240-27f wi0: <WaveLAN/IEEE 802.11> at port 0x240-0x27f irq 10 slot 0 on pccard0 wi0: found Lucent chip pcic: I/O win 0 flags 15 240-27f wi0: Ethernet address: 00:60:1d:f2:38:c0 wi0: wi_generic_attach:wi_has_wep = 1 bpf: wi0 attached wi0: watchdog timeout wi0: watchdog timeout __________________________________________________ Do You Yahoo!? Get personalized email addresses from Yahoo! Mail http://personal.mail.yahoo.com/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20010711082629.89379.qmail>