Date: Thu, 13 Jun 2002 08:09:14 -0700 (PDT) From: George Yobst <george@lincc.lib.or.us> To: Don Bowman <don@sandvine.com> Cc: "'freebsd-stable@freebsd.org'" <freebsd-stable@FreeBSD.ORG> Subject: Re: dual processor XEON shows Message-ID: <Pine.BSF.4.32.0206130806140.96729-100000@localhost> In-Reply-To: <FE045D4D9F7AED4CBFF1B3B813C8533767644D@mail.sandvine.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi Don, In your BIOS setup, under Advanced Processor Options, set your Frequency Ratio to match your processor speed. It evidently doesn't autodetect this, and defaults to 8x. As far as 4 CPU's, unfortunately I run W2K server on mine. ;-( -George On Thu, 13 Jun 2002, Don Bowman wrote: * *I have a Supermicro dual xeon 2GHz motherboard. I find that when *I run top, I have processes running on CPU0...3. When I run dmesg, *I find it lists 4 CPU's. * *Has anyone else run into anything like this? * *I also don't find this machine overly stable, it sometimes just *stops working. * *Also, the CPU speed shows as ~800MHz here, but its supposed to be *2GHz. Any suggestions on where that comes from or how its measured? * *Timecounter "i8254" frequency 1193182 Hz *CPU: Pentium 4 (798.64-MHz 686-class CPU) * Origin = "GenuineIntel" Id = 0xf24 Stepping = 4 * *Features=0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA *,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,<b28>,ACC> *real memory = 1073217536 (1048064K bytes) *avail memory = 1039548416 (1015184K bytes) *Programming 24 pins in IOAPIC #0 *IOAPIC #0 intpin 2 -> irq 0 *Programming 24 pins in IOAPIC #1 *Programming 24 pins in IOAPIC #2 *FreeBSD/SMP: Multiprocessor motherboard * cpu0 (BSP): apic id: 0, version: 0x00050014, at 0xfee00000 * cpu1 (AP): apic id: 6, version: 0x00050014, at 0xfee00000 * cpu2 (AP): apic id: 1, version: 0x00050014, at 0xfee00000 * cpu3 (AP): apic id: 7, version: 0x00050014, at 0xfee00000 * io0 (APIC): apic id: 2, version: 0x00178020, at 0xfec00000 * io1 (APIC): apic id: 3, version: 0x00178020, at 0xfec80000 * io2 (APIC): apic id: 4, version: 0x00178020, at 0xfec80400 *Preloaded elf kernel "kernel" at 0xc040c000. *netsmb_dev: loaded *md0: Malloc disk *Using $PIR table, 24 entries at 0xc00fde40 *npx0: <math processor> on motherboard *npx0: INT 16 interface *pcib0: <Host to PCI bridge> on motherboard *IOAPIC #0 intpin 16 -> irq 2 *IOAPIC #0 intpin 19 -> irq 10 *IOAPIC #0 intpin 18 -> irq 11 *pci0: <PCI bus> on pcib0 *pci0: <unknown card> (vendor=0x8086, dev=0x2541) at 0.1 *pcib1: <PCI to PCI bridge (vendor=8086 device=2543)> at device 2.0 on pci0 *pci1: <PCI bus> on pcib1 *pci1: <unknown card> (vendor=0x8086, dev=0x1461) at 28.0 *pcib2: <PCI to PCI bridge (vendor=8086 device=1460)> at device 29.0 on pci1 *IOAPIC #2 intpin 0 -> irq 16 *pci2: <PCI bus> on pcib2 *bge0: <Broadcom BCM5700 Gigabit Ethernet> mem 0xfc200000-0xfc20ffff irq 16 *at device 1.0 on pci2 *bge0: Ethernet address: 00:10:18:01:06:84 *miibus0: <MII bus> on bge0 *brgphy0: <BCM5401 10/100/1000baseTX PHY> on miibus0 *brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, *1000baseTX-FDX, auto *pci1: <unknown card> (vendor=0x8086, dev=0x1461) at 30.0 *pcib3: <PCI to PCI bridge (vendor=8086 device=1460)> at device 31.0 on pci1 *IOAPIC #1 intpin 4 -> irq 17 *IOAPIC #1 intpin 5 -> irq 18 *IOAPIC #1 intpin 7 -> irq 19 *pci3: <PCI bus> on pcib3 *ahc0: <Adaptec aic7899 Ultra160 SCSI adapter> port 0x2000-0x20ff mem *0xfc340000-0xfc340fff irq 17 at device 2.0 on pci3 *aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs *ahc1: <Adaptec aic7899 Ultra160 SCSI adapter> port 0x2400-0x24ff mem *0xfc341000-0xfc341fff irq 18 at device 2.1 on pci3 *aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs *pci3: <unknown card> (vendor=0x8086, dev=0x100d) at 4.0 irq 19 *uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0x1400-0x141f *irq 2 at device 29.0 on pci0 *usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0 *usb0: USB revision 1.0 *uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 *uhub0: 2 ports with 2 removable, self powered *uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port 0x1420-0x143f *irq 10 at device 29.1 on pci0 *usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1 *usb1: USB revision 1.0 *uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 *uhub1: 2 ports with 2 removable, self powered *uhci2: <UHCI (generic) USB controller> port 0x1440-0x145f irq 11 at device *29.2 on pci0 *uhci2: (New UHCI DeviceId=0x24878086) *usb2: <UHCI (generic) USB controller> on uhci2 *usb2: USB revision 1.0 *uhub2: (0x24878086) UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 *uhub2: 2 ports with 2 removable, self powered *pcib4: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on pci0 *IOAPIC #0 intpin 17 -> irq 20 *pci4: <PCI bus> on pcib4 *pci4: <ATI Mach64-GR graphics accelerator> at 1.0 irq 2 *fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x3400-0x343f mem *0xfc420000-0xfc43ffff,0xfc401000-0xfc401fff irq 20 at device 2.0 on pci4 *fxp0: Ethernet address 00:30:48:12:36:07 *inphy0: <i82555 10/100 media interface> on miibus1 *inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto *isab0: <PCI to ISA bridge (vendor=8086 device=2480)> at device 31.0 on pci0 *isa0: <ISA bus> on isab0 *atapci0: <Intel ICH3 ATA100 controller> port *0x1460-0x146f,0-0x3,0-0x7,0-0x3,0-0x7 irq 0 at device 31.1 on pci0 *ata0: at 0x1f0 irq 14 on atapci0 *ata1: at 0x170 irq 15 on atapci0 *pci0: <unknown card> (vendor=0x8086, dev=0x2483) at 31.3 irq 0 *orm0: <Option ROMs> at iomem *0xc0000-0xc7fff,0xc8000-0xc8fff,0xce800-0xcffff,0xd0000-0xd0fff,0xd8000-0xdb *fff,0xdc000-0xdffff on isa0 *fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 *fdc0: FIFO enabled, 8 bytes threshold *fd0: <1440-KB 3.5" drive> on fdc0 drive 0 *atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 *atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 *kbd0 at atkbd0 *vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 *sc0: <System console> at flags 0x100 on isa0 *sc0: VGA <16 virtual consoles, flags=0x100> *sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 *sio0: type 16550A, console *sio1 at port 0x2f8-0x2ff irq 3 on isa0 *sio1: type 16550A *APIC_IO: Testing 8254 interrupt delivery *APIC_IO: routing 8254 via IOAPIC #0 intpin 2 *IP packet filtering initialized, divert enabled, rule-based forwarding *enabled, default to accept, logging disabled *BRIDGE 020214 loaded *DUMMYNET initialized (011031) *SMP: AP CPU #2 Launched! *SMP: AP CPU #1 Launched! *acd0: CDROM <MATSHITA CR-177> at ata1-master PIO4 *Waiting 2 seconds for SCSI devices to settle *SMP: AP CPU #3 Launched! *pass2 at ahc0 bus 0 target 6 lun 0 *pass2: <SUPER GEM318 0> Fixed Processor SCSI-2 device *pass2: 3.300MB/s transfers *da0 at ahc0 bus 0 target 0 lun 0 *da0: <SEAGATE ST318452LC 0004> Fixed Direct Access SCSI-3 device *da0: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing *Enabled *da0: 17501MB (35843670 512 byte sectors: 255H 63S/T 2231C) *da1 at ahc0 bus 0 target 1 lun 0 *da1: <SEAGATE ST318452LC 0004> Fixed Direct Access SCSI-3 device *da1: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing *Enabled *da1: 17501MB (35843670 512 byte sectors: 255H 63S/T 2231C) * *To Unsubscribe: send mail to majordomo@FreeBSD.org *with "unsubscribe freebsd-stable" in the body of the message * --------------------------------------------------------------------------- George Yobst, Library Technology Specialist phone: 503.723.4890 Library Information Network of Clackamas County fax: 503.794.8238 16239 SE McLoughlin Blvd, Suite 208 web: http://www.lincc.lib.or.us Oak Grove, OR 97267-4654 email: george@lincc.lib.or.us "...it is impossible for anyone to begin to learn what he thinks he already knows." - Epictetus To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.32.0206130806140.96729-100000>