Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 13 Aug 2009 08:35:26 +0300
From:      Krassimir Slavchev <krassi@bulinfo.net>
To:        Nathan Le Nevez <nathan@lenevez.net.au>
Cc:        "freebsd-performance@freebsd.org" <freebsd-performance@freebsd.org>
Subject:   Re: Very slow I/O performance on HP BL465c
Message-ID:  <4A83A61E.6010009@bulinfo.net>
In-Reply-To: <C6A9D3EE.5E90%nathan@lenevez.net.au>
References:  <C6A9D3EE.5E90%nathan@lenevez.net.au>

next in thread | previous in thread | raw e-mail | index | archive | help
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Nathan Le Nevez wrote:
> I?m fairly certain this is a hardware problem ? swapping the disks from
> a known working install on another blade produced the same lousy
> performance.

Hmm, Check the SAS cables between the controller and the disks tray.
Also check the connector's pins. I had such problems on a DL380.

Best Regards

> 
> Thanks for your help, time to put a call in with HP although without any
> real errors to show them it is going to be a challenge.
> 
> 
> On 12/08/09 5:57 PM, "Krassimir Slavchev" <krassi@bulinfo.net> wrote:
> 
> Is it possible to exchange disks between your blade1 and blade2 servers?
> Or to remove disks from one server and connect them to another?
> Also compare 'tunefs -p /' outputs
> Also compare the read speed of a raw device with e.g. 'dd if=/dev/da0
> of=/dev/null bs=1m count=100'
> 
> Nathan Le Nevez wrote:
>> # df -h
>> Filesystem     Size    Used   Avail Capacity  Mounted on
>> /dev/da0s1a    496M    224M    232M    49%    /
>> devfs          1.0K    1.0K      0B   100%    /dev
>> /dev/da0s1e    496M     14K    456M     0%    /tmp
>> /dev/da0s1f    119G    623M    109G     0%    /usr
>> /dev/da0s1d    4.8G    346K    4.4G     0%    /var
>> # mount
>> /dev/da0s1a on / (ufs, local)
>> devfs on /dev (devfs, local)
>> /dev/da0s1e on /tmp (ufs, local, soft-updates)
>> /dev/da0s1f on /usr (ufs, local, soft-updates)
>> /dev/da0s1d on /var (ufs, local, soft-updates)
> 
>> / - Throughput 6.59862 MB/sec 4 procs
>> /usr - Throughput 14.487 MB/sec 4 procs
> 
> 
> 
>> On 12/08/09 3:41 PM, "Krassimir Slavchev" <krassi@bulinfo.net> wrote:
> 
>> Looks okay.
>> How your disks are partitioned and from where you are running dbench.
>> Look at the -D option. For example I have:
>> / without soft updates -> Throughput 72.7276 MB/sec 4
>> procs
>> /var with soft updates -> Throughput 286.528 MB/sec 4 procs
> 
>> Are you sure that you are not running dbench on zfs or encrypted
>> partition?
> 
>> Nathan Le Nevez wrote:
>>> # vmstat -i
>>> interrupt                          total       rate
>>> irq1: atkbd0                          18          0
>>> irq5: ohci0 ohci1+                     1          0
>>> irq19: ciss0                      144916          3
>>> irq21: uhci0                          22          0
>>> cpu0: timer                     80002970       1999
>>> irq256: bce0                       17042          0
>>> cpu2: timer                     79994902       1999
>>> cpu1: timer                     79994975       1999
>>> cpu3: timer                     79995009       1999
>>> cpu6: timer                     79994957       1999
>>> cpu5: timer                     79995046       1999
>>> cpu4: timer                     79995041       1999
>>> cpu7: timer                     79995057       1999
>>> Total                          640129956      16000
> 
>>> # camcontrol tags da0
>>> (pass0:ciss0:0:0:0): device openings: 254
> 
>>> Just for clarification, both systems are running amd64.
> 
>>> Thanks,
> 
>>> Nathan
> 
>>> -----Original Message-----
>>> From: Krassimir Slavchev [mailto:krassi@bulinfo.net]
>>> Sent: Tuesday, 11 August 2009 9:45 PM
>>> To: Nathan Le Nevez
>>> Cc: freebsd-performance@freebsd.org
>>> Subject: Re: Very slow I/O performance on HP BL465c
> 
>>> Hi,
> 
>>> What is the output of 'vmstat -i' and 'camcontrol tags da0' ?
>>> I have a ML350 running 7-STABLE with same controller and disks and
>>> performance is almost same as your good server.
> 
>>> Nathan Le Nevez wrote:
>>>> Hi,
> 
>>>> I'm running 7.2-p3 on 2x HP BL465c blade servers, one of which
>> performs very
>>>> poorly. Both have the same RAID controller and 2 x 146GB 10k SAS
> disks
>>>> configured in RAID-1. Both controllers have write-cache enabled. Both
>>>> servers are running the same BIOS and firmware versions. Neither
>> servers are
>>>> running any services other than sshd.
> 
>>>> Blade with good performance (2 x Opteron 2218, 8GB RAM):
> 
>>>> ciss0: <HP Smart Array E200i> port 0x4000-0x40ff mem
>>>> 0xfdf80000-0xfdffffff,0xfdf70000-0xfdf77fff irq 19 at device 8.0
>> on pci80
>>>> ciss0: [ITHREAD]
>>>> da0 at ciss0 bus 0 target 0 lun 0
>>>> da0: <COMPAQ RAID 1  VOLUMES MOPK:>  AFPi xCePdU  D#i2r Leacuntc
>> hAcecde!s
>>>> s SCSI-5 device
>>>> da0: 135.168MB/s transfers
>>>> dSaM0P::  CAoP CPU #3 Launched!
>>>> mmand Queueing Enabled
>>>> da0: 139979MB (286677120 512 byte sectors: 255H 32S/T 35132C)
> 
>>>> Blade with bad performance (2 x Opteron 2352, 16GB RAM):
> 
>>>> ciss0: <HP Smart Array E200i> port 0x4000-0x40ff mem
>>>> 0xfdf80000-0xfdffffff,0xfdf70000-0xfdf77fff irq 19 at device 8.0
>> on pci80
>>>> ciss0: [ITHREAD]
>>>> da0 at ciss0 bus 0 target 0 lun 0
>>>> da0: <COMPAQ RAID 1  VOLUME OK> Fixed Direct Access SCSI-5 device
>>>> da0: 135.168MB/s transfers
>>>> da0: Command Queueing Enabled
>>>> da0: 139979MB (286677120 512 byte sectors: 255H 32S/T 35132C)
> 
>>>> # dbench -t 10  1              2              3             4
>>>> blade1          183.456 MB/sec 236.86 MB/sec  299.28 MB/sec
>>  192.675 MB/sec
>>>> blade2          6.97931 MB/sec 9.42293 MB/sec 10.2482 MB/sec
>> 12.407 MB/sec
> 
>>>> Any help/ideas would be greatly appreciated. I have run through
>> all the
>>>> Insight diagnostics tools and it fails to find anything wrong with
>> the slow
>>>> server.
> 
>>>> Cheers,
>>>> Nathan
> 
>>>> _______________________________________________
>>>> freebsd-performance@freebsd.org mailing list
>>>> http://lists.freebsd.org/mailman/listinfo/freebsd-performance
>>>> To unsubscribe, send any mail to
>> "freebsd-performance-unsubscribe@freebsd.org"
> 
> 
> 
> 

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.7 (FreeBSD)

iD8DBQFKg6YexJBWvpalMpkRAt+EAKCIQFP0lAv44TpcUPm2ZC3rP4opSwCfcOZN
Gp4q2KxquOyvYJNYvTPk+Sc=
=GRjk
-----END PGP SIGNATURE-----



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4A83A61E.6010009>