Date: Thu, 11 Jul 1996 15:51:33 -0700 From: "G.R.Gircys" <rich@oester.com> To: Bill/Carolyn Pechter <pechter@shell.monmouth.com> Cc: questions@freebsd.org, hackers@freebsd.org Subject: Re: adaptec 154X support Message-ID: <31E58575.641C@oester.com> References: <199607112205.SAA27822@shell.monmouth.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Bill/Carolyn Pechter wrote: > > It should work. I did have problems with my 1542B and put in a CF and > found that the problem was a SCSI-1 drive that thought it was SCSI-2. > I disabled disconnect and sync negotiation on the old HP troublemaker > under the CF and it's been fine. The 1542B worked in the system as well > with the correct jumpering. > i do have a disk jumper problem. this is an old fujitsu drive; had sync problems with it before on various os's. i disabled sync - much better, get's a lot further but still got panic eventually (CCB erros) - so i try this jumper to select scsi I instead of II - this did not work at all. can't find any jumper to control disconnect - will play some more and post results (if any). > I'll try to put a system together to test the 1542B this weekend. > don't bother - from other responses it's obvious freebsd does support old adaptec; from your response, it's pretty obvious to me that i have to play with disk config jumpers. thnx, rich
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?31E58575.641C>