Date: Fri, 23 Mar 2001 11:23:17 +1100 From: "Johny Mattsson (EPA)" <Johny.Mattsson@ericsson.com.au> To: "'lonewolf-fbsd-current-forwarder@flame.org'" <lonewolf-fbsd-current-forwarder@flame.org> Subject: newcard/cardbus instabilities Message-ID: <4B6BC00CD15FD2119E5F0008C7A419A50E13F9C0@eaubrnt018.epa.ericsson.se>
next in thread | raw e-mail | index | archive | help
This message is in MIME format. Since your mail reader does not understand
this format, some or all of this message may not be legible.
------_=_NextPart_001_01C0B32F.74C890B0
Content-Type: text/plain;
charset="iso-8859-1"
Hi all,
Semi-recently grabbed a snapshot of -CURRENT (from 03/06) to see if I could
finally get my 3Com 3c575C Fast Etherlink XL cardbus lancard to work. I saw
it mentioned in the HARDWARE.TXT so I decided to give it a go. What I didn't
realize was that the newcard/cardbus was still in its early stages. So what
I am experiencing now is that the card is properly detected (which doesn't
happen with the card/pcic devices), _but_ when using it, I experience
frequent timeouts and delays.
The xl driver spits out numerous "xl0: watchdog timeout", and I get pings
around the one second mark, even to machines on the same switch. Trying to
maintain TCP sessions without keeping a running ping in the background is
futile, due to the packet loss.
So basically, I'm wondering what I can do to help getting this fixed? I very
much want to see proper cardbus support (having to run windoze to get net
connectivity is highly annoying and counter productive).
I don't have any means of running cvsup regularly (stuck behind heavy
firewall), and I unfortunately have no experience with writing device
drivers, but should otherwise be able to tweak code as instructed. I'll be
happy to be a testbed for the 3c575C (and I'll be very happy when I can
report that it seems to work flawlessly!).
Below I have included a dmesg, kernel conf, ifconfig, and a sample ping to
my default gateway, which hopefully is of some help to someone.
Cheers,
/Johny
============ dmesg output ==============
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-20010306-CURRENT #0: Thu Mar 22 15:54:41 EST 2001
epaatts@dragon:/usr/src/sys/compile/DRAGON
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 648011290 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (648.01-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x683 Stepping = 3
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,
PAT,PSE36,MMX,FXSR,SSE>
real memory = 201326592 (196608K bytes)
config> di sn0
config> di lnc0
config> di le0
config> di ie0
config> di fe0
config> di ed0
config> di cs0
config> di bt0
config> di aic0
config> di aha0
config> di adv0
config> en apm0
config> ir apm0 0
config> f apm0 0x20
config> q
avail memory = 191627264 (187136K bytes)
Preloaded elf kernel "kernel" at 0xc03d8000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc03d809c.
WARNING: size of kinfo_proc (648) should be 644!!!
Pentium Pro MTRR support enabled
Using $PIR table, 7 entries at 0xc00fdf50
apm0: <APM BIOS> on motherboard
apm0: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> at pcibus 0 on
motherboard
pci0: <PCI bus> on pcib0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at 0.0 (no driver attached)
pccbb0: <TI1225 PCI-CardBus Bridge> at device 4.0 on pci0
pccbb0: PCI Memory allocated: 44000000
pci_cfgintr_unique: hard-routed to irq 10
pci_cfgintr: 0:4 INTA routed to irq 10
cardbus0: <Cardbus bus (newcard)> on pccbb0
pccard0: <16-bit PCCard bus> on pccbb0
pccbb1: <TI1225 PCI-CardBus Bridge> at device 4.1 on pci0
pccbb1: PCI Memory allocated: 44001000
pci_cfgintr_unique: hard-routed to irq 10
pci_cfgintr: 0:4 INTB routed to irq 10
cardbus1: <Cardbus bus (newcard)> on pccbb1
pccard1: <16-bit PCCard bus> on pccbb1
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xfcf0-0xfcff at device 7.1 on
pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <serial bus, USB> at 7.2 (no driver attached)
pci0: <bridge, PCI-unknown> at 7.3 (no driver attached)
pcm0: <ESS Technology Maestro-2E> port 0xf800-0xf8ff irq 10 at device 8.0 on
pci0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
pmtimer0 on isa0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/7 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0303> can't assign resources
unknown: <PNP0501> can't assign resources
unknown: <PNP0401> can't assign resources
unknown: <PNP0f13> can't assign resources
unknown: <PNP0700> can't assign resources
IP packet filtering initialized, divert enabled, rule-based forwarding
disabled, default to deny, logging disabled
IPsec: Initialized Security Association Processing.
ad0: 11513MB <IBM-DARA-212000> [23392/16/63] at ata0-master UDMA33
Mounting root from ufs:/dev/ad0s3a
pccbb0: card inserted: event=0x00000000, state=30000410
pccard0: chip_socket_enable
pccbb_pcic_socket_enable:
pccbb0: pccbb_power: CARD_VCC_0V and CARD_VPP_0V [44]
pccbb0: pccbb_power: CARD_VCC_5V and CARD_VPP_VCC [15]
pccbb0: pccbb_pcic_wait_ready: status 0x7f
pccbb0: card type is mem
pccard0: read_cis
pccbb_pcic_mem_map window 0 bus 44002000+400+bbffe000 card addr 0
pccbb_pcic_do_mem_map window 0: 8002 8002 3ffe 44
(44002000+00000400.00001000*bbffe000)
pccbb_pcic_do_mem_map window 0: 8002 8002 7ffe 44
(44002000+00000400.00001000*bbffe000)
cis mem map d2e65000
pccard0: CIS tuple chain:
CISTPL_DEVICE type=null speed=null
01 02 00 ff
CISTPL_DEVICE_A type=null speed=null
17 02 00 ff
CISTPL_VERS_1
15 39 05 00 58 69 72 63 6f 6d 00 43 72 65 64 69
74 43 61 72 64 20 4d 6f 64 65 6d 20 35 36 20 2d
20 47 6c 6f 62 61 6c 41 43 43 45 53 53 00 43 4d
2d 35 36 47 00 31 2e 30 30 00 ff
unhandled CISTPL 88
88 08 d7 8b 05 00 00 00 00 00
CISTPL_MANFID
20 05 05 01 0a 10 45
unhandled CISTPL 44
44 04 f6 6c 1e 27
CISTPL_CONFIG
1a 05 01 3f 80 ff 67
CISTPL_CFTABLE_ENTRY
1b 14 e7 c1 9d 0f 55 4d 5d 26 e0 17 17 ea 60 e8
02 07 f0 bc 8e 20
CISTPL_CFTABLE_ENTRY
1b 07 1f 08 ea 60 e8 03 07
CISTPL_CFTABLE_ENTRY
1b 07 17 08 ea 60 f8 02 07
CISTPL_CFTABLE_ENTRY
1b 07 0f 08 ea 60 f8 03 07
CISTPL_CFTABLE_ENTRY
1b 03 3f 08 63
CISTPL_FUNCID
21 02 02 00
unhandled CISTPL 22
22 04 00 02 0f 5c
unhandled CISTPL 22
22 0c 02 06 00 3f 1c 03 03 0f 07 00 01 b5
unhandled CISTPL 22
22 08 13 06 00 00 00 00 00 00
unhandled CISTPL 8a
8a 0c 39 41 30 30 44 42 30 35 38 42 44 37
CISTPL_NO_LINK
14 00
CISTPL_END
ff
pccard0: check_cis_quirks
pccard0: CIS version PC Card Standard 5.0
pccard0: CIS info: Xircom, CreditCard Modem 56 - GlobalACCESS, CM-56G, 1.00
pccard0: Manufacturer code 0x105, product 0x100a
pccard0: function 0: serial port, ccr addr ff80 mask 67
pccard0: function 0, config table entry 39: I/O card; irq mask 8ebc; iomask
a, iospace 2e8-2ef; powerdown
pccard0: function 0, config table entry 31: I/O card; irq mask 8ebc; iomask
a, iospace 3e8-3ef; io8 io16 powerdown
pccard0: function 0, config table entry 23: I/O card; irq mask 8ebc; iomask
a, iospace 2f8-2ff; io8 io16 powerdown
pccard0: function 0, config table entry 15: I/O card; irq mask 8ebc; iomask
a, iospace 3f8-3ff; io8 io16 powerdown
pccard0: function 0, config table entry 63: I/O card; irq mask 8ebc; iomask
3, iospace 0-7; io8 io16 powerdown
pccard0: functions scanning
pccbb_pcic_socket_enable:
pccbb0: pccbb_power: CARD_VCC_0V and CARD_VPP_0V [44]
pccbb0: pccbb_power: CARD_VCC_5V and CARD_VPP_VCC [15]
pccbb0: pccbb_pcic_wait_ready: status 0x7f
pccbb0: card type is io
pccard0: ++enabled_count = 1
pccbb_pcic_mem_map window 0 bus 44002000+400+bbffe000 card addr 0
pccbb_pcic_do_mem_map window 0: 8002 8002 3ffe 44
(44002000+00000400.00001000*bbffe000)
pccard0: ccr_res == 44002000-440023ff, base=ff80
pccbb_pcic_do_mem_map window 0: 8002 8002 7ffe 44
(44002000+00000400.00001000*bbffe000)
pccbb_pcic_do_mem_map window 0: 8002 8003 400d 44
(44002000+00000400.00002000*bc00d000)
pccard0: function 0 CCR at 0 offset f80: 67 20 0 0, 0 0 ff ff, ff
pccbb1: card inserted: event=0x00000000, state=30000b20
pccbb1: pccbb_power: CARD_VCC_0V and CARD_VPP_0V [44]
pccbb1: pccbb_power: CARD_VCC_3V and CARD_VPP_VCC [11]
pccbb1: bad Vcc request. ctrl=0x33, status=0x30000b20
pccbb_power: CARD_VCC_3V and CARD_VPP_VCC [11]
TUPLE: LINKTARGET [3]: 43 49 53
Manufacturer ID: 01015752
TUPLE: CONFIG_CB [6]: 03 01 00 00 00 00
TUPLE: CFTABLE_ENTRY_CB [13]: 41 9a 01 b5 1e 01 b5 1e 02 30 ff ff 01
cardbus1: Opening BAR: type=IO, bar=10, len=0040
Product version: 5.0
Product name: 3Com Corporation | 3CCFE575CT | LAN Cardbus Card | 004 |
Functions: Network Adaptor, Memory
CIS reading done
xl0: <3Com 3c575C Fast Etherlink XL> port 0x3000-0x307f mem
0x44020000-0x4403ffff,0x44002480-0x440024ff,0x44002400-0x4400247f irq 10 at
device 0.0 on cardbus1
xl0: chip is in D6 power mode -- setting to D0
xl0: Ethernet address: 00:00:86:55:62:4e
miibus0: <MII bus> on xl0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: watchdog timeout
xl0: watchdog timeout
xl0: watchdog timeout
xl0: watchdog timeout
xl0: watchdog timeout
xl0: watchdog timeout
xl0: watchdog timeout
....ad infinitum
============ kernel config ==============
machine i386
cpu I586_CPU
cpu I686_CPU
ident DRAGON
maxusers 32
#To statically compile in device wiring instead of /boot/device.hints
#hints "GENERIC.hints" #Default places to look for devices.
options INET #InterNETworking
#options INET6 #IPv6 communications protocols
options IPSEC
options IPSEC_ESP
options IPFIREWALL
options IPDIVERT
options IPSTEALTH
options TCP_DROP_SYNFIN
options TCP_RESTRICT_RST
options NMBCLUSTERS="32768"
options FFS #Berkeley Fast Filesystem
options SOFTUPDATES #Enable FFS soft updates support
options NFS #Network Filesystem
options MSDOSFS #MSDOS Filesystem
options CD9660 #ISO 9660 Filesystem
options DEVFS #Device Filesystem
options PROCFS #Process filesystem
options COMPAT_43 #Compatible with BSD 4.3 [KEEP
THIS!]
options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI
options UCONSOLE #Allow users to grab the console
options USERCONFIG #boot -c editor
options VISUAL_USERCONFIG #visual boot -c editor
options KTRACE #ktrace(1) support
options SYSVSHM #SYSV-style shared memory
options SYSVMSG #SYSV-style message queues
options SYSVSEM #SYSV-style semaphores
options P1003_1B #Posix P1003_1B real-time extensions
options _KPOSIX_PRIORITY_SCHEDULING
options KBD_INSTALL_CDEV # install a CDEV entry in /dev
options SC_HISTORY_SIZE=1000
device isa
device pci
# Floppy drives
device fdc
# ATA and ATAPI devices
device ata
device atadisk # ATA disk drives
device atapicd # ATAPI CDROM drives
device atapifd # ATAPI floppy drives
options ATA_STATIC_ID #Static device numbering
options ATA_ENABLE_ATAPI_DMA #Enable DMA on ATAPI devices
# atkbdc0 controls both the keyboard and the PS/2 mouse
device atkbdc 1 # At keyboard controller
device atkbd # at keyboard
device psm # psm mouse
device vga # VGA screen
# splash screen/screen saver
device splash
# syscons is the default console driver, resembling an SCO console
device sc 1
# Floating point support - do not disable.
device npx
# Power management support (see NOTES for more options)
device apm
# Add suspend/resume support for the i8254.
device pmtimer
# Audio support
device pcm
# PCCARD (PCMCIA) support
#device card # pccard bus
#device pcic # PCMCIA bridge
device pccard
device cardbus
device pccbb
# Serial (COM) ports
device sio # 8250, 16[45]50 based serial ports
# Parallel port
device ppc
device ppbus # Parallel port bus (required)
device lpt # Printer
device plip # TCP/IP over parallel
device ppi # Parallel port interface device
#device vpo # Requires scbus and da
# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device miibus # MII bus support
device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
# Pseudo devices - the number indicates how many units to allocated.
device random # Entropy device
device loop # Network loopback
device ether # Ethernet support
device tun # Packet tunnel.
device pty # Pseudo-ttys (telnet etc)
device speaker
# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
device bpf 8 # Berkeley packet filter
============ ifconfig output ==============
xl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet 203.94.128.71 netmask 0xffffffc0 broadcast 203.94.128.127
ether 00:00:86:55:62:4e
media: autoselect (100baseTX <full-duplex>) status: active
supported media: autoselect 100baseTX <full-duplex> 100baseTX
10baseT/UTP <full-duplex> 10baseT/UTP none
Note: tested lowering the media setting, but same effect regardless
============ sample pings ==============
PING 203.94.128.65 (203.94.128.65): 56 data bytes
64 bytes from 203.94.128.65: icmp_seq=0 ttl=64 time=1.589 ms
64 bytes from 203.94.128.65: icmp_seq=1 ttl=64 time=0.268 ms
64 bytes from 203.94.128.65: icmp_seq=2 ttl=64 time=1010.059 ms
64 bytes from 203.94.128.65: icmp_seq=3 ttl=64 time=0.320 ms
64 bytes from 203.94.128.65: icmp_seq=4 ttl=64 time=1010.056 ms
64 bytes from 203.94.128.65: icmp_seq=5 ttl=64 time=140.041 ms
64 bytes from 203.94.128.65: icmp_seq=6 ttl=64 time=0.286 ms
64 bytes from 203.94.128.65: icmp_seq=7 ttl=64 time=1010.049 ms
64 bytes from 203.94.128.65: icmp_seq=8 ttl=64 time=1010.045 ms
64 bytes from 203.94.128.65: icmp_seq=9 ttl=64 time=1010.048 ms
64 bytes from 203.94.128.65: icmp_seq=10 ttl=64 time=1010.045 ms
64 bytes from 203.94.128.65: icmp_seq=11 ttl=64 time=280.039 ms
64 bytes from 203.94.128.65: icmp_seq=12 ttl=64 time=1010.048 ms
64 bytes from 203.94.128.65: icmp_seq=13 ttl=64 time=1010.053 ms
64 bytes from 203.94.128.65: icmp_seq=14 ttl=64 time=1010.045 ms
64 bytes from 203.94.128.65: icmp_seq=15 ttl=64 time=1010.044 ms
64 bytes from 203.94.128.65: icmp_seq=16 ttl=64 time=1010.045 ms
64 bytes from 203.94.128.65: icmp_seq=17 ttl=64 time=1010.044 ms
64 bytes from 203.94.128.65: icmp_seq=18 ttl=64 time=1010.046 ms
--- 203.94.128.65 ping statistics ---
20 packets transmitted, 19 packets received, 5% packet loss
round-trip min/avg/max/stddev = 0.268/713.325/1010.059/440.860 ms
------_=_NextPart_001_01C0B32F.74C890B0
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2//EN">
<HTML>
<HEAD>
<META HTTP-EQUIV=3D"Content-Type" CONTENT=3D"text/html; =
charset=3DUS-ASCII">
<META NAME=3D"Generator" CONTENT=3D"MS Exchange Server version =
5.5.2654.19">
<TITLE>newcard/cardbus instabilities</TITLE>
</HEAD>
<BODY>
<P><FONT SIZE=3D2 FACE=3D"Courier New">Hi all,</FONT>
</P>
<P><FONT SIZE=3D2 FACE=3D"Courier New">Semi-recently grabbed a snapshot =
of -CURRENT (from 03/06) to see if I could finally get my 3Com 3c575C =
Fast Etherlink XL cardbus lancard to work. I saw it mentioned in the =
HARDWARE.TXT so I decided to give it a go. What I didn't realize was =
that the newcard/cardbus was still in its early stages. So what I am =
experiencing now is that the card is properly detected (which doesn't =
happen with the card/pcic devices), _but_ when using it, I experience =
frequent timeouts and delays.</FONT></P>
<P><FONT SIZE=3D2 FACE=3D"Courier New">The xl driver spits out numerous =
"xl0: watchdog timeout", and I get pings around the one =
second mark, even to machines on the same switch. Trying to maintain =
TCP sessions without keeping a running ping in the background is =
futile, due to the packet loss.</FONT></P>
<P><FONT SIZE=3D2 FACE=3D"Courier New">So basically, I'm wondering what =
I can do to help getting this fixed? I very much want to see proper =
cardbus support (having to run windoze to get net connectivity is =
highly annoying and counter productive).</FONT></P>
<P><FONT SIZE=3D2 FACE=3D"Courier New">I don't have any means of =
running cvsup regularly (stuck behind heavy firewall), and I =
unfortunately have no experience with writing device drivers, but =
should otherwise be able to tweak code as instructed. I'll be happy to =
be a testbed for the 3c575C (and I'll be very happy when I can report =
that it seems to work flawlessly!).</FONT></P>
<BR>
<P><FONT SIZE=3D2 FACE=3D"Courier New">Below I have included a dmesg, =
kernel conf, ifconfig, and a sample ping to my default gateway, which =
hopefully is of some help to someone.</FONT></P>
<P><FONT SIZE=3D2 FACE=3D"Courier New">Cheers,</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">/Johny</FONT>
</P>
<BR>
<P><FONT SIZE=3D2 FACE=3D"Courier =
New">=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D dmesg output =
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">Copyright (c) 1992-2001 The =
FreeBSD Project.</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">Copyright (c) 1979, 1980, 1983, =
1986, 1988, 1989, 1991, 1992, 1993, 1994</FONT>
<BR> <FONT SIZE=3D2 =
FACE=3D"Courier New">The Regents of the University of California. All =
rights reserved.</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">FreeBSD 5.0-20010306-CURRENT =
#0: Thu Mar 22 15:54:41 EST 2001</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New"> =
epaatts@dragon:/usr/src/sys/compile/DRAGON</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">Timecounter =
"i8254" frequency 1193182 Hz</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">Timecounter =
"TSC" frequency 648011290 Hz</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">CPU: Pentium III/Pentium III =
Xeon/Celeron (648.01-MHz 686-class CPU)</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New"> Origin =3D =
"GenuineIntel" Id =3D 0x683 Stepping =3D 3</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New"> =
Features=3D0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,=
MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE></FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">real memory =3D 201326592 =
(196608K bytes)</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">config> di sn0</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">config> di lnc0</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">config> di le0</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">config> di ie0</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">config> di fe0</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">config> di ed0</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">config> di cs0</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">config> di bt0</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">config> di aic0</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">config> di aha0</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">config> di adv0</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">config> en apm0</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">config> ir apm0 0</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">config> f apm0 0x20</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">config> q</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">avail memory =3D 191627264 =
(187136K bytes)</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">Preloaded elf kernel =
"kernel" at 0xc03d8000.</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">Preloaded userconfig_script =
"/boot/kernel.conf" at 0xc03d809c.</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">WARNING: size of kinfo_proc =
(648) should be 644!!!</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">Pentium Pro MTRR support =
enabled</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">Using $PIR table, 7 entries at =
0xc00fdf50</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">apm0: <APM BIOS> on =
motherboard</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">apm0: found APM BIOS v1.2, =
connected at v1.2</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">npx0: <math processor> on =
motherboard</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">npx0: INT 16 interface</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">pcib0: <Intel 82443BX (440 =
BX) host to PCI bridge> at pcibus 0 on motherboard</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">pci0: <PCI bus> on =
pcib0</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">pcib1: <PCI-PCI bridge> =
at device 1.0 on pci0</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">pci1: <PCI bus> on =
pcib1</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">pci1: <display, VGA> at =
0.0 (no driver attached)</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">pccbb0: <TI1225 PCI-CardBus =
Bridge> at device 4.0 on pci0</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">pccbb0: PCI Memory allocated: =
44000000</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">pci_cfgintr_unique: hard-routed =
to irq 10</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">pci_cfgintr: 0:4 INTA routed to =
irq 10</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">cardbus0: <Cardbus bus =
(newcard)> on pccbb0</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">pccard0: <16-bit PCCard =
bus> on pccbb0</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">pccbb1: <TI1225 PCI-CardBus =
Bridge> at device 4.1 on pci0</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">pccbb1: PCI Memory allocated: =
44001000</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">pci_cfgintr_unique: hard-routed =
to irq 10</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">pci_cfgintr: 0:4 INTB routed to =
irq 10</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">cardbus1: <Cardbus bus =
(newcard)> on pccbb1</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">pccard1: <16-bit PCCard =
bus> on pccbb1</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">isab0: <PCI-ISA bridge> =
at device 7.0 on pci0</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">isa0: <ISA bus> on =
isab0</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">atapci0: <Intel PIIX4 ATA33 =
controller> port 0xfcf0-0xfcff at device 7.1 on pci0</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">ata0: at 0x1f0 irq 14 on =
atapci0</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">ata1: at 0x170 irq 15 on =
atapci0</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">pci0: <serial bus, USB> =
at 7.2 (no driver attached)</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">pci0: <bridge, =
PCI-unknown> at 7.3 (no driver attached)</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">pcm0: <ESS Technology =
Maestro-2E> port 0xf800-0xf8ff irq 10 at device 8.0 on pci0</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">atkbdc0: <Keyboard =
controller (i8042)> at port 0x60,0x64 on isa0</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">atkbd0: <AT Keyboard> =
flags 0x1 irq 1 on atkbdc0</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">kbd0 at atkbd0</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">psm0: <PS/2 Mouse> irq 12 =
on atkbdc0</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">psm0: model Generic PS/2 mouse, =
device ID 0</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">fdc0: <NEC 72065B or =
clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">fdc0: FIFO enabled, 8 bytes =
threshold</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">fd0: <1440-KB 3.5" =
drive> on fdc0 drive 0</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">pmtimer0 on isa0</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">ppc0: <Parallel port> at =
port 0x378-0x37f irq 7 on isa0</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">ppc0: SMC-like chipset =
(ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">ppc0: FIFO with 16/16/7 bytes =
threshold</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">plip0: <PLIP network =
interface> on ppbus0</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">lpt0: <Printer> on =
ppbus0</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">lpt0: Interrupt-driven =
port</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">ppi0: <Parallel I/O> on =
ppbus0</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">sc0: <System console> at =
flags 0x100 on isa0</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">sc0: VGA <16 virtual =
consoles, flags=3D0x300></FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">sio0 at port 0x3f8-0x3ff irq 4 =
flags 0x10 on isa0</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">sio0: type 16550A</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">sio1: configured irq 3 not in =
bitmap of probed irqs 0</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">vga0: <Generic ISA VGA> =
at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">unknown: <PNP0303> can't =
assign resources</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">unknown: <PNP0501> can't =
assign resources</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">unknown: <PNP0401> can't =
assign resources</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">unknown: <PNP0f13> can't =
assign resources</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">unknown: <PNP0700> can't =
assign resources</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">IP packet filtering =
initialized, divert enabled, rule-based forwarding disabled, default to =
deny, logging disabled</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">IPsec: Initialized Security =
Association Processing.</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">ad0: 11513MB =
<IBM-DARA-212000> [23392/16/63] at ata0-master UDMA33</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">Mounting root from =
ufs:/dev/ad0s3a</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">pccbb0: card inserted: =
event=3D0x00000000, state=3D30000410</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">pccard0: =
chip_socket_enable</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier =
New">pccbb_pcic_socket_enable:</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">pccbb0: pccbb_power: =
CARD_VCC_0V and CARD_VPP_0V [44]</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">pccbb0: pccbb_power: =
CARD_VCC_5V and CARD_VPP_VCC [15]</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">pccbb0: pccbb_pcic_wait_ready: =
status 0x7f</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">pccbb0: card type is mem</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">pccard0: read_cis</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">pccbb_pcic_mem_map window 0 bus =
44002000+400+bbffe000 card addr 0</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">pccbb_pcic_do_mem_map window 0: =
8002 8002 3ffe 44 (44002000+00000400.00001000*bbffe000)</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">pccbb_pcic_do_mem_map window 0: =
8002 8002 7ffe 44 (44002000+00000400.00001000*bbffe000)</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">cis mem map d2e65000</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">pccard0: CIS tuple =
chain:</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">CISTPL_DEVICE type=3Dnull =
speed=3Dnull</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New"> 01 02 00 ff</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">CISTPL_DEVICE_A type=3Dnull =
speed=3Dnull</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New"> 17 02 00 ff</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">CISTPL_VERS_1</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New"> 15 39 05 00 58 69 72 63 =
6f 6d 00 43 72 65 64 69</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New"> 74 43 61 72 64 20 4d 6f =
64 65 6d 20 35 36 20 2d</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New"> 20 47 6c 6f 62 61 6c 41 =
43 43 45 53 53 00 43 4d</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New"> 2d 35 36 47 00 31 2e 30 =
30 00 ff</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">unhandled CISTPL 88</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New"> 88 08 d7 8b 05 00 00 00 =
00 00</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">CISTPL_MANFID</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New"> 20 05 05 01 0a 10 =
45</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">unhandled CISTPL 44</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New"> 44 04 f6 6c 1e 27</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">CISTPL_CONFIG</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New"> 1a 05 01 3f 80 ff =
67</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">CISTPL_CFTABLE_ENTRY</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New"> 1b 14 e7 c1 9d 0f 55 4d =
5d 26 e0 17 17 ea 60 e8</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New"> 02 07 f0 bc 8e 20</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">CISTPL_CFTABLE_ENTRY</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New"> 1b 07 1f 08 ea 60 e8 03 =
07</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">CISTPL_CFTABLE_ENTRY</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New"> 1b 07 17 08 ea 60 f8 02 =
07</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">CISTPL_CFTABLE_ENTRY</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New"> 1b 07 0f 08 ea 60 f8 03 =
07</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">CISTPL_CFTABLE_ENTRY</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New"> 1b 03 3f 08 63</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">CISTPL_FUNCID</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New"> 21 02 02 00</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">unhandled CISTPL 22</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New"> 22 04 00 02 0f 5c</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">unhandled CISTPL 22</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New"> 22 0c 02 06 00 3f 1c 03 =
03 0f 07 00 01 b5</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">unhandled CISTPL 22</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New"> 22 08 13 06 00 00 00 00 =
00 00</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">unhandled CISTPL 8a</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New"> 8a 0c 39 41 30 30 44 42 =
30 35 38 42 44 37</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">CISTPL_NO_LINK</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New"> 14 00</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">CISTPL_END</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New"> ff</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">pccard0: =
check_cis_quirks</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">pccard0: CIS version PC Card =
Standard 5.0</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">pccard0: CIS info: Xircom, =
CreditCard Modem 56 - GlobalACCESS, CM-56G, 1.00</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">pccard0: Manufacturer code =
0x105, product 0x100a</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">pccard0: function 0: serial =
port, ccr addr ff80 mask 67</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">pccard0: function 0, config =
table entry 39: I/O card; irq mask 8ebc; iomask a, iospace 2e8-2ef; =
powerdown</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">pccard0: function 0, config =
table entry 31: I/O card; irq mask 8ebc; iomask a, iospace 3e8-3ef; io8 =
io16 powerdown</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">pccard0: function 0, config =
table entry 23: I/O card; irq mask 8ebc; iomask a, iospace 2f8-2ff; io8 =
io16 powerdown</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">pccard0: function 0, config =
table entry 15: I/O card; irq mask 8ebc; iomask a, iospace 3f8-3ff; io8 =
io16 powerdown</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">pccard0: function 0, config =
table entry 63: I/O card; irq mask 8ebc; iomask 3, iospace 0-7; io8 =
io16 powerdown</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">pccard0: functions =
scanning</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier =
New">pccbb_pcic_socket_enable:</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">pccbb0: pccbb_power: =
CARD_VCC_0V and CARD_VPP_0V [44]</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">pccbb0: pccbb_power: CARD_VCC_5V=
and CARD_VPP_VCC [15]</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">pccbb0: pccbb_pcic_wait_ready: =
status 0x7f</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">pccbb0: card type is io</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">pccard0: ++enabled_count =3D =
1</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">pccbb_pcic_mem_map window 0 bus =
44002000+400+bbffe000 card addr 0</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">pccbb_pcic_do_mem_map window 0: =
8002 8002 3ffe 44 (44002000+00000400.00001000*bbffe000)</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">pccard0: ccr_res =3D=3D =
44002000-440023ff, base=3Dff80</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">pccbb_pcic_do_mem_map window 0: =
8002 8002 7ffe 44 (44002000+00000400.00001000*bbffe000)</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">pccbb_pcic_do_mem_map window 0: =
8002 8003 400d 44 (44002000+00000400.00002000*bc00d000)</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">pccard0: function 0 CCR at 0 =
offset f80: 67 20 0 0, 0 0 ff ff, ff</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">pccbb1: card inserted: =
event=3D0x00000000, state=3D30000b20</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">pccbb1: pccbb_power: =
CARD_VCC_0V and CARD_VPP_0V [44]</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">pccbb1: pccbb_power: =
CARD_VCC_3V and CARD_VPP_VCC [11]</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">pccbb1: bad Vcc request. =
ctrl=3D0x33, status=3D0x30000b20</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">pccbb_power: CARD_VCC_3V and =
CARD_VPP_VCC [11]</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">TUPLE: LINKTARGET [3]: 43 49 =
53</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">Manufacturer ID: =
01015752</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">TUPLE: CONFIG_CB [6]: 03 01 00 =
00 00 00</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">TUPLE: CFTABLE_ENTRY_CB [13]: =
41 9a 01 b5 1e 01 b5 1e 02 30 ff ff 01</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">cardbus1: Opening BAR: =
type=3DIO, bar=3D10, len=3D0040</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">Product version: 5.0</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">Product name: 3Com Corporation =
| 3CCFE575CT | LAN Cardbus Card | 004 | </FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">Functions: Network Adaptor, =
Memory</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">CIS reading done</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">xl0: <3Com 3c575C Fast =
Etherlink XL> port 0x3000-0x307f mem =
0x44020000-0x4403ffff,0x44002480-0x440024ff,0x44002400-0x4400247f irq =
10 at device 0.0 on cardbus1</FONT></P>
<P><FONT SIZE=3D2 FACE=3D"Courier New">xl0: chip is in D6 power mode -- =
setting to D0</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">xl0: Ethernet address: =
00:00:86:55:62:4e</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">miibus0: <MII bus> on =
xl0</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">ukphy0: <Generic IEEE 802.3u =
media interface> on miibus0</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">ukphy0: 10baseT, =
10baseT-FDX, 100baseTX, 100baseTX-FDX, auto</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">xl0: watchdog timeout</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">xl0: watchdog timeout</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">xl0: watchdog timeout</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">xl0: watchdog timeout</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">xl0: watchdog timeout</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">xl0: watchdog timeout</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">xl0: watchdog timeout</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">....ad infinitum</FONT>
</P>
<P><FONT SIZE=3D2 FACE=3D"Courier =
New">=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D kernel config =
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">machine =
i386</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">cpu =
I586_CPU</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">cpu =
I686_CPU</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">ident =
DRAGON</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier =
New">maxusers 32</FONT>
</P>
<P><FONT SIZE=3D2 FACE=3D"Courier New">#To statically compile in device =
wiring instead of /boot/device.hints</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">#hints =
"GENERIC.hints" =
#Default places to look for =
devices.</FONT>
</P>
<P><FONT SIZE=3D2 FACE=3D"Courier New">options =
INET =
=
#InterNETworking</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">#options =
INET6 =
=
#IPv6 communications =
protocols</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">options =
IPSEC</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">options =
IPSEC_ESP</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">options =
IPFIREWALL</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">options =
IPDIVERT</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">options =
IPSTEALTH</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">options =
TCP_DROP_SYNFIN</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">options =
TCP_RESTRICT_RST</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">options =
=
NMBCLUSTERS=3D"32768"</FONT>
</P>
<P><FONT SIZE=3D2 FACE=3D"Courier New">options =
FFS =
=
#Berkeley Fast =
Filesystem</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">options =
=
SOFTUPDATES =
#Enable FFS soft updates =
support</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">options =
NFS =
=
#Network Filesystem</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">options =
MSDOSFS =
=
#MSDOS Filesystem</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">options =
CD9660 =
=
#ISO 9660 Filesystem</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">options =
DEVFS =
=
#Device Filesystem</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">options =
PROCFS =
=
#Process filesystem</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">options =
=
COMPAT_43 =
#Compatible with BSD 4.3 =
[KEEP THIS!]</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">options =
=
SCSI_DELAY=3D15000 #Delay (in =
ms) before probing SCSI</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">options =
=
UCONSOLE =
#Allow users to grab the =
console</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">options =
=
USERCONFIG =
#boot -c editor</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">options =
=
VISUAL_USERCONFIG #visual boot -c =
editor</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">options =
KTRACE =
=
#ktrace(1) support</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">options =
SYSVSHM =
=
#SYSV-style shared =
memory</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">options =
SYSVMSG =
=
#SYSV-style message =
queues</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">options =
SYSVSEM =
=
#SYSV-style =
semaphores</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">options =
=
P1003_1B =
#Posix P1003_1B real-time =
extensions</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">options =
=
_KPOSIX_PRIORITY_SCHEDULING</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">options =
=
KBD_INSTALL_CDEV # install a =
CDEV entry in /dev</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">options =
=
SC_HISTORY_SIZE=3D1000</FONT>
</P>
<P><FONT SIZE=3D2 FACE=3D"Courier New">device =
isa</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">device =
pci</FONT>
</P>
<P><FONT SIZE=3D2 FACE=3D"Courier New"># Floppy drives</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">device =
fdc</FONT>
</P>
<P><FONT SIZE=3D2 FACE=3D"Courier New"># ATA and ATAPI devices</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">device =
ata</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">device =
atadisk =
=
# ATA disk drives</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">device =
atapicd =
=
# ATAPI CDROM drives</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">device =
atapifd =
=
# ATAPI floppy drives</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">options =
ATA_STATIC_ID =
#Static device =
numbering</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">options =
=
ATA_ENABLE_ATAPI_DMA #Enable DMA on ATAPI =
devices</FONT>
</P>
<P><FONT SIZE=3D2 FACE=3D"Courier New"># atkbdc0 controls both the =
keyboard and the PS/2 mouse</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">device =
atkbdc =
1 # At keyboard controller</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">device =
atkbd =
# at keyboard</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">device =
psm =
# psm mouse</FONT>
</P>
<P><FONT SIZE=3D2 FACE=3D"Courier New">device =
vga =
# VGA screen</FONT>
</P>
<P><FONT SIZE=3D2 FACE=3D"Courier New"># splash screen/screen =
saver</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">device =
splash</FONT>
</P>
<P><FONT SIZE=3D2 FACE=3D"Courier New"># syscons is the default console =
driver, resembling an SCO console</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">device =
=
sc 1</FONT>
</P>
<P><FONT SIZE=3D2 FACE=3D"Courier New"># Floating point support - do =
not disable.</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">device =
npx</FONT>
</P>
<P><FONT SIZE=3D2 FACE=3D"Courier New"># Power management support (see =
NOTES for more options)</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">device =
apm</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New"># Add suspend/resume support =
for the i8254.</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">device =
pmtimer</FONT>
</P>
<P><FONT SIZE=3D2 FACE=3D"Courier New"># Audio support</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">device =
pcm</FONT>
</P>
<P><FONT SIZE=3D2 FACE=3D"Courier New"># PCCARD (PCMCIA) support</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">#device =
card =
# pccard bus</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">#device =
pcic =
# PCMCIA bridge</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">device =
pccard</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">device =
cardbus</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">device =
pccbb</FONT>
</P>
<P><FONT SIZE=3D2 FACE=3D"Courier New"># Serial (COM) ports</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">device =
sio =
# 8250, 16[45]50 based =
serial ports</FONT>
</P>
<P><FONT SIZE=3D2 FACE=3D"Courier New"># Parallel port</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">device =
ppc</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">device =
ppbus =
# Parallel port bus =
(required)</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">device =
lpt =
# Printer</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">device =
plip =
# TCP/IP over =
parallel</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">device =
ppi =
# Parallel port interface =
device</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">#device =
vpo =
# Requires scbus and =
da</FONT>
</P>
<BR>
<P><FONT SIZE=3D2 FACE=3D"Courier New"># PCI Ethernet NICs that use the =
common MII bus controller code.</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New"># NOTE: Be sure to keep the =
'device miibus' line in order to use these NICs!</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">device =
miibus =
# MII bus support</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">device =
=
xl =
# 3Com 3c90x (``Boomerang'', =
``Cyclone'')</FONT>
</P>
<BR>
<P><FONT SIZE=3D2 FACE=3D"Courier New"># Pseudo devices - the number =
indicates how many units to allocated.</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">device =
random =
# Entropy device</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">device =
loop =
# Network loopback</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">device =
ether =
# Ethernet support</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">device =
tun =
# Packet tunnel.</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">device =
pty =
# Pseudo-ttys (telnet =
etc)</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">device =
speaker</FONT>
</P>
<P><FONT SIZE=3D2 FACE=3D"Courier New"># The `bpf' device enables the =
Berkeley Packet Filter.</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New"># Be aware of the =
administrative consequences of enabling this!</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">device =
bpf =
8 # Berkeley packet filter</FONT>
</P>
<P><FONT SIZE=3D2 FACE=3D"Courier =
New">=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D ifconfig output =
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">xl0: =
flags=3D8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu =
1500</FONT>
<BR> <FONT SIZE=3D2 =
FACE=3D"Courier New">inet 203.94.128.71 netmask 0xffffffc0 broadcast =
203.94.128.127</FONT>
<BR> <FONT SIZE=3D2 =
FACE=3D"Courier New">ether 00:00:86:55:62:4e </FONT>
<BR> <FONT SIZE=3D2 =
FACE=3D"Courier New">media: autoselect (100baseTX <full-duplex>) =
status: active</FONT>
<BR> <FONT SIZE=3D2 =
FACE=3D"Courier New">supported media: autoselect 100baseTX =
<full-duplex> 100baseTX 10baseT/UTP <full-duplex> =
10baseT/UTP none</FONT>
</P>
<P><FONT SIZE=3D2 FACE=3D"Courier New">Note: tested lowering the media =
setting, but same effect regardless</FONT>
</P>
<BR>
<P><FONT SIZE=3D2 FACE=3D"Courier =
New">=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D sample pings =
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">PING 203.94.128.65 =
(203.94.128.65): 56 data bytes</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">64 bytes from 203.94.128.65: =
icmp_seq=3D0 ttl=3D64 time=3D1.589 ms</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">64 bytes from 203.94.128.65: =
icmp_seq=3D1 ttl=3D64 time=3D0.268 ms</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">64 bytes from 203.94.128.65: =
icmp_seq=3D2 ttl=3D64 time=3D1010.059 ms</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">64 bytes from 203.94.128.65: =
icmp_seq=3D3 ttl=3D64 time=3D0.320 ms</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">64 bytes from 203.94.128.65: =
icmp_seq=3D4 ttl=3D64 time=3D1010.056 ms</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">64 bytes from 203.94.128.65: =
icmp_seq=3D5 ttl=3D64 time=3D140.041 ms</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">64 bytes from 203.94.128.65: =
icmp_seq=3D6 ttl=3D64 time=3D0.286 ms</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">64 bytes from 203.94.128.65: =
icmp_seq=3D7 ttl=3D64 time=3D1010.049 ms</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">64 bytes from 203.94.128.65: =
icmp_seq=3D8 ttl=3D64 time=3D1010.045 ms</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">64 bytes from 203.94.128.65: =
icmp_seq=3D9 ttl=3D64 time=3D1010.048 ms</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">64 bytes from 203.94.128.65: =
icmp_seq=3D10 ttl=3D64 time=3D1010.045 ms</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">64 bytes from 203.94.128.65: =
icmp_seq=3D11 ttl=3D64 time=3D280.039 ms</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">64 bytes from 203.94.128.65: =
icmp_seq=3D12 ttl=3D64 time=3D1010.048 ms</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">64 bytes from 203.94.128.65: =
icmp_seq=3D13 ttl=3D64 time=3D1010.053 ms</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">64 bytes from 203.94.128.65: =
icmp_seq=3D14 ttl=3D64 time=3D1010.045 ms</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">64 bytes from 203.94.128.65: =
icmp_seq=3D15 ttl=3D64 time=3D1010.044 ms</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">64 bytes from 203.94.128.65: =
icmp_seq=3D16 ttl=3D64 time=3D1010.045 ms</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">64 bytes from 203.94.128.65: =
icmp_seq=3D17 ttl=3D64 time=3D1010.044 ms</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">64 bytes from 203.94.128.65: =
icmp_seq=3D18 ttl=3D64 time=3D1010.046 ms</FONT>
</P>
<P><FONT SIZE=3D2 FACE=3D"Courier New">--- 203.94.128.65 ping =
statistics ---</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">20 packets transmitted, 19 =
packets received, 5% packet loss</FONT>
<BR><FONT SIZE=3D2 FACE=3D"Courier New">round-trip min/avg/max/stddev =
=3D 0.268/713.325/1010.059/440.860 ms</FONT>
</P>
</BODY>
</HTML>
------_=_NextPart_001_01C0B32F.74C890B0--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4B6BC00CD15FD2119E5F0008C7A419A50E13F9C0>