Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 25 Sep 2000 14:00:38 -0700
From:      Darryl Okahata <darrylo@soco.agilent.com>
To:        wpaul@FreeBSD.ORG (Bill Paul)
Cc:        eric@svjava.com (Eric Kozowski), mobile@FreeBSD.ORG, hardware@FreeBSD.ORG
Subject:   Re: Help with WaveLAN Card 
Message-ID:  <200009252100.OAA18978@mina.soco.agilent.com>
In-Reply-To: Your message of "Mon, 25 Sep 2000 12:20:01 PDT." <20000925192001.3F3E037B43C@hub.freebsd.org> 

next in thread | previous in thread | raw e-mail | index | archive | help
wpaul@FreeBSD.ORG (Bill Paul) wrote:

> > as per the many discussions, as are available in the archives, the pci
> > based bridge from lucent does not currently work.
> 
> That may be, but he's not what he said. Read closer: he has a laptop
> with a particular cardbus bridge chipset, *not* a PCI card. I've heard

     Huh?  Which poster are you talking about?  The original poster, to
which Eric was replying, has a *DESKTOP*; here's a (reformatted) quote:

	... I have a Lucent WaveLAN Silver 11Mbps PCMCIA Card, a Texas
	Instrument (chipset recognized as 1225) PCMCIA-PCI Cardbus
	bridge (sold by lucent), a regular Desktop PC and FreeBSD
	4.1-STABLE.  ...

He never said that he has a laptop.  As Eric said, this poster is
probably running into the TI1225 PCI-PCMCIA issue, which Warner has not
yet had the time to investigate/fix (I believe).

     Now, there was a different poster (Andreas Braukmann
<braukmann@tse-online.de>), who does have a problematic laptop (a Sony
Vaio).  Perhaps you're getting the two posters confused?

     Interestingly enough, the symptoms of the two problems appear to
be the same.  I can't help but wonder if the cause isn't, also.

--
	Darryl Okahata
	darrylo@soco.agilent.com

DISCLAIMER: this message is the author's personal opinion and does not
constitute the support, opinion, or policy of Agilent Technologies, or
of the little green men that have been following him all day.


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-hardware" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200009252100.OAA18978>