Date: Mon, 17 Feb 2003 18:03:08 -0500 From: The Anarcat <anarcat@anarcat.ath.cx> To: freebsd-current@freebsd.org Subject: reproducable ACPI hang on 5.0-RELEASE + Asus A7V mobo Message-ID: <20030217230308.GA594@lenny.anarcat.ath.cx>
next in thread | raw e-mail | index | archive | help
--opJtzjQTFsWo+cga
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
Content-Transfer-Encoding: quoted-printable
Hello!
I've been experimenting quite a bit with the new ACPI stuff from
5.0-release. I can reliably hang my box using acpiconf -s 3, both from
X and the console. In X, upon wakeup, the screen is trashed with color
strips. In the console, I can actually get some interaction back, but
the whole thing hangs after a few seconds anyways.
This is with an almost GENERIC kernel (attached), on a Asus A7V KT133
motherboard.
Any concrete way to debug this? Cause a panic?
Should I report this somewhere else since 5.0 !=3D 5.x-current? :)
A.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-RELEASE #1: Sun Feb 16 23:11:48 EST 2003
anarcat@lenny.anarcat.ath.cx:/usr/src/sys/i386/compile/LENNII
Preloaded elf kernel "/boot/kernel/kernel" at 0xc06a9000.
Preloaded elf module "/boot/kernel/snd_emu10k1.ko" at 0xc06a90a8.
Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc06a9158.
Preloaded elf module "/boot/kernel/radeon.ko" at 0xc06a9204.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc06a92b0.
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 1008992864 Hz
CPU: AMD Duron(tm) Processor (1008.99-MHz 686-class CPU)
Origin =3D "AuthenticAMD" Id =3D 0x670 Stepping =3D 0
Features=3D0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,=
CMOV,PAT,PSE36,MMX,FXSR,SSE>
AMD Features=3D0xffffffffc0440000<RSVD,AMIE,DSP,3DNow!>
real memory =3D 1207877632 (1151 MB)
avail memory =3D 1167048704 (1112 MB)
Initializing GEOMetry subsystem
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <ASUS A7V-133 > on motherboard
ACPI-0625: *** Info: GPE Block0 defined as GPE0 to GPE15
Using $PIR table, 9 entries at 0xc00f1750
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-fast" frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <VIA 82C8363 (Apollo KT133A) host to PCI bridge> mem 0xe6000000-0xe7f=
fffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
drm0: <ATI Radeon QY VE (AGP)> port 0xd800-0xd8ff mem 0xd7000000-0xd700ffff=
,0xd8000000-0xdfffffff irq 11 at device 0.0 on pci1
info: [drm] AGP at 0xe6000000 32MB
info: [drm] Initialized radeon 1.1.1 20010405 on minor 0
isab0: <PCI-ISA bridge> at device 4.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686 ATA100 controller> port 0xb800-0xb80f at device 4.1 on=
pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <VIA 83C572 USB controller> port 0xb400-0xb41f irq 9 at device 4.2 o=
n pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xb000-0xb01f irq 9 at device 4.3 o=
n pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pci0: <bridge, PCI-unknown> at device 4.4 (no driver attached)
vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0x9400-0x94ff mem 0xd6800000-0=
xd68000ff irq 9 at device 9.0 on pci0
vr0: Ethernet address: 00:50:ba:64:e3:6a
miibus0: <MII bus> on vr0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcm0: <Creative EMU10K1> port 0x9000-0x901f irq 5 at device 10.0 on pci0
atapci1: <Promise ATA100 controller> port 0x7000-0x703f,0x7400-0x7403,0x780=
0-0x7807,0x8000-0x8003,0x8400-0x8407 mem 0xd6000000-0xd601ffff irq 10 at de=
vice 17.0 on pci0
ata2: at 0x8400 on atapci1
ata3: at 0x7800 on atapci1
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x=
3f2-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model MouseMan+, device ID 0
orm0: <Option ROMs> at iomem 0xcc000-0xce7ff,0xc0000-0xcafff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=3D0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
acpi_cpu: CPU throttling enabled, 16 steps from 100% to 6.2%
ad4: 38182MB <MAXTOR 4K040H2> [77578/16/63] at ata2-master UDMA100
MBREXT Slice 5 on ad4s2:
0000 00 01 01 c1 0b fe bf 42 3f 00 00 00 c3 a6 54 02 |.......B?.....T.|
[0] f:00 typ:11 s(CHS):193/1/1 e(CHS):66/254/191 s:63 l:39102147
0000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
cd0 at ata0 bus 0 target 0 lun 0
cd0: <PLEXTOR CD-R PX-W4012A 1.01> Removable CD-ROM SCSI-0 device=20
cd0: 16.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present - t=
ray closed
cd1 at ata1 bus 0 target 0 lun 0
cd1: <LG CD-ROM CRD-8522B 2.02> Removable CD-ROM SCSI-0 device=20
cd1: 16.000MB/s transfers
cd1: Attempt to query device size failed: NOT READY, Medium not present
Mounting root from ufs:/dev/ad4s3a
WARNING: / was not properly dismounted
WARNING: /tmp was not properly dismounted
WARNING: /usr was not properly dismounted
netsmb_dev: loaded
agp0@pci0:0:0: class=3D0x060000 card=3D0x80421043 chip=3D0x03051106 rev=3D=
0x03 hdr=3D0x00
vendor =3D 'VIA Technologies Inc'
device =3D 'VT8363/5 KT133/KM133 System Controller'
class =3D bridge
subclass =3D HOST-PCI
pcib1@pci0:1:0: class=3D0x060400 card=3D0x00000080 chip=3D0x83051106 rev=3D=
0x00 hdr=3D0x01
vendor =3D 'VIA Technologies Inc'
device =3D 'VT8363/5 Apollo KT133/KM133 PCI to AGP Bridge'
class =3D bridge
subclass =3D PCI-PCI
isab0@pci0:4:0: class=3D0x060100 card=3D0x80421043 chip=3D0x06861106 rev=3D=
0x40 hdr=3D0x00
vendor =3D 'VIA Technologies Inc'
device =3D 'VT82C686/A/B "Super South" PCI to ISA Bridge'
class =3D bridge
subclass =3D PCI-ISA
atapci0@pci0:4:1: class=3D0x01018a card=3D0x00000000 chip=3D0x0571110=
6 rev=3D0x06 hdr=3D0x00
vendor =3D 'VIA Technologies Inc'
device =3D 'VT82xxxx EIDE Controller (All VIA Chipsets)'
class =3D mass storage
subclass =3D ATA
uhci0@pci0:4:2: class=3D0x0c0300 card=3D0x12340925 chip=3D0x30381106 rev=3D=
0x16 hdr=3D0x00
vendor =3D 'VIA Technologies Inc'
device =3D 'VT82xxxxx UHCI USB 1.1 Controller (All VIA Chipsets)'
class =3D serial bus
subclass =3D USB
uhci1@pci0:4:3: class=3D0x0c0300 card=3D0x12340925 chip=3D0x30381106 rev=3D=
0x16 hdr=3D0x00
vendor =3D 'VIA Technologies Inc'
device =3D 'VT82xxxxx UHCI USB 1.1 Controller (All VIA Chipsets)'
class =3D serial bus
subclass =3D USB
none0@pci0:4:4: class=3D0x068000 card=3D0x80421043 chip=3D0x30571106 rev=3D=
0x40 hdr=3D0x00
vendor =3D 'VIA Technologies Inc'
device =3D 'VT82C686A/B ACPI Power Management Controller'
class =3D bridge
subclass =3D PCI-unknown
vr0@pci0:9:0: class=3D0x020000 card=3D0x14001186 chip=3D0x30651106 rev=3D=
0x42 hdr=3D0x00
vendor =3D 'VIA Technologies Inc'
device =3D 'VT6102 Rhine II PCI Fast Ethernet Controller'
class =3D network
subclass =3D ethernet
pcm0@pci0:10:0: class=3D0x040100 card=3D0x80641102 chip=3D0x00021102 rev=3D=
0x07 hdr=3D0x00
vendor =3D 'Creative Labs'
device =3D 'EMU10K1 Audio Chipset (SB Live!)'
class =3D multimedia
subclass =3D audio
emujoy0@pci0:10:1: class=3D0x098000 card=3D0x00201102 chip=3D0x7002110=
2 rev=3D0x07 hdr=3D0x00
vendor =3D 'Creative Labs'
device =3D 'PCI Gameport Joystick'
class =3D input device
atapci1@pci0:17:0: class=3D0x018000 card=3D0x4d33105a chip=3D0x0d30105=
a rev=3D0x02 hdr=3D0x00
vendor =3D 'Promise Technology Inc'
device =3D 'PDC20265 FastTrak100 Lite EIDE Controller'
class =3D mass storage
drm0@pci1:0:0: class=3D0x030000 card=3D0x000a1002 chip=3D0x51591002 rev=3D=
0x00 hdr=3D0x00
vendor =3D 'ATI Technologies'
device =3D 'Radeon VE QY Radeon 7000 / Radeon VE'
class =3D display
subclass =3D VGA
#
# GENERIC -- Generic kernel configuration file for FreeBSD/i386
#
# For more information on this file, please read the handbook section on
# Kernel Configuration Files:
#
# http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig=
-config.html
#
# The handbook is also available locally in /usr/share/doc/handbook
# if you've installed the doc distribution, otherwise always see the
# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
# latest information.
#
# An exhaustive list of options and more detailed explanations of the
# device lines is also present in the ../../conf/NOTES and NOTES files.=20
# If you are in doubt as to the purpose or necessity of a line, check first=
=20
# in NOTES.
#
# $FreeBSD: src/sys/i386/conf/GENERIC,v 1.369.2.2 2002/12/31 05:35:45 scott=
l Exp $
machine i386
cpu I486_CPU
cpu I586_CPU
cpu I686_CPU
ident GENERIC
maxusers 0
#To statically compile in device wiring instead of /boot/device.hints
#hints "GENERIC.hints" #Default places to look for devices.
#makeoptions DEBUG=3D-g #Build kernel with gdb(1) debug symbols
options INET #InterNETworking
options INET6 #IPv6 communications protocols
options FFS #Berkeley Fast Filesystem
options SOFTUPDATES #Enable FFS soft updates support
options UFS_ACL #Support for access control lists
options UFS_DIRHASH #Improve performance on big directories
options MD_ROOT #MD is a potential root device
options NFSCLIENT #Network Filesystem Client
options NFSSERVER #Network Filesystem Server
options NFS_ROOT #NFS usable as root device, requires NFSCLIENT
options MSDOSFS #MSDOS Filesystem
options CD9660 #ISO 9660 Filesystem
options PROCFS #Process filesystem (requires PSEUDOFS)
options PSEUDOFS #Pseudo-filesystem framework
options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
options COMPAT_FREEBSD4 #Compatible with FreeBSD4
options SCSI_DELAY=3D15000 #Delay (in ms) before probing SCSI
options KTRACE #ktrace(1) support
options SYSVSHM #SYSV-style shared memory
options SYSVMSG #SYSV-style message queues
options SYSVSEM #SYSV-style semaphores
options _KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions
options KBD_INSTALL_CDEV # install a CDEV entry in /dev
options AHC_REG_PRETTY_PRINT # Print register bitfields in debug
# output. Adds ~128k to driver.
options AHD_REG_PRETTY_PRINT # Print register bitfields in debug
# output. Adds ~215k to driver.
# Debugging for use in -current
#options DDB #Enable the kernel debugger
#options INVARIANTS #Enable calls of extra sanity checking
options INVARIANT_SUPPORT #Extra sanity checks of internal structures, req=
uired by INVARIANTS
#options WITNESS #Enable checks to detect deadlocks and cycles
#options WITNESS_SKIPSPIN #Don't run witness on spinlocks for speed
# To make an SMP kernel, the next two are needed
#options SMP # Symmetric MultiProcessor Kernel
#options APIC_IO # Symmetric (APIC) I/O
device isa
device eisa
device pci
# Floppy drives
device fdc
# ATA and ATAPI devices
device ata
device atadisk # ATA disk drives
device atapifd # ATAPI floppy drives
device atapist # ATAPI tape drives
device atapicam
options ATA_STATIC_ID #Static device numbering
# SCSI Controllers
device ahb # EISA AHA1742 family
device ahc # AHA2940 and onboard AIC7xxx devices
device ahd # AHA39320/29320 and onboard AIC79xx devices
device amd # AMD 53C974 (Tekram DC-390(T))
device isp # Qlogic family
device mpt # LSI-Logic MPT-Fusion
#device ncr # NCR/Symbios Logic
device sym # NCR/Symbios Logic (newer chipsets + those of `ncr')
device adv # Advansys SCSI adapters
device adw # Advansys wide SCSI adapters
device aha # Adaptec 154x SCSI adapters
device aic # Adaptec 15[012]x SCSI adapters, AIC-6[23]60.
device bt # Buslogic/Mylex MultiMaster SCSI adapters
device ncv # NCR 53C500
device nsp # Workbit Ninja SCSI-3
device stg # TMC 18C30/18C50
# RAID controllers interfaced to the SCSI subsystem
device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID
device ciss # Compaq Smart RAID 5*
device dpt # DPT Smartcache III, IV - See NOTES for options!
device iir # Intel Integrated RAID
device mly # Mylex AcceleRAID/eXtremeRAID
# SCSI peripherals
device scbus # SCSI bus (required)
device ch # SCSI media changers
device da # Direct Access (disks)
device sa # Sequential Access (tape etc)
device cd # CD
device pass # Passthrough device (direct SCSI access)
device ses # SCSI Environmental Services (and SAF-TE)
# RAID controllers
device aac # Adaptec FSA RAID
device aacp # SCSI passthrough for aac (requires CAM)
device amr # AMI MegaRAID
device ida # Compaq Smart RAID
device mlx # Mylex DAC960 family
device pst # Promise Supertrak SX6000
device twe # 3ware ATA RAID
# atkbdc0 controls both the keyboard and the PS/2 mouse
device atkbdc # AT keyboard controller
device atkbd # AT keyboard
device psm # PS/2 mouse
device vga # VGA video card driver
device splash # Splash screen and screen saver support
# syscons is the default console driver, resembling an SCO console
device sc
# Enable this for the pcvt (VT220 compatible) console driver
#device vt
#options XSERVER # support for X server on a vt console
#options FAT_CURSOR # start with block cursor
device agp # support several AGP chipsets
# Floating point support - do not disable.
device npx
# Power management support (see NOTES for more options)
#device apm
# Add suspend/resume support for the i8254.
device pmtimer
# PCCARD (PCMCIA) support
# Pcmcia and cardbus bridge support
device cbb # cardbus (yenta) bridge
#device pcic # ExCA ISA and PCI bridges
device pccard # PC Card (16-bit) bus
device cardbus # CardBus (32-bit) bus
# Serial (COM) ports
device sio # 8250, 16[45]50 based serial ports
# Parallel port
device ppc
device ppbus # Parallel port bus (required)
device lpt # Printer
device plip # TCP/IP over parallel
device ppi # Parallel port interface device
#device vpo # Requires scbus and da
# PCI Ethernet NICs.
device de # DEC/Intel DC21x4x (``Tulip'')
device em # Intel PRO/1000 adapter Gigabit Ethernet Card
device txp # 3Com 3cR990 (``Typhoon'')
device vx # 3Com 3c590, 3c595 (``Vortex'')
# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device miibus # MII bus support
device dc # DEC/Intel 21143 and various workalikes
device fxp # Intel EtherExpress PRO/100B (82557, 82558)
device pcn # AMD Am79C97x PCI 10/100 (precedence over 'lnc')
device rl # RealTek 8129/8139
device sf # Adaptec AIC-6915 (``Starfire'')
device sis # Silicon Integrated Systems SiS 900/SiS 7016
device ste # Sundance ST201 (D-Link DFE-550TX)
device tl # Texas Instruments ThunderLAN
device tx # SMC EtherPower II (83c170 ``EPIC'')
device vr # VIA Rhine, Rhine II
device wb # Winbond W89C840F
device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
device bge # Broadcom BCM570xx Gigabit Ethernet
# ISA Ethernet NICs. pccard nics included.
device cs # Crystal Semiconductor CS89x0 NIC
# 'device ed' requires 'device miibus'
device ed # NE[12]000, SMC Ultra, 3c503, DS8390 cards
device ex # Intel EtherExpress Pro/10 and Pro/10+
device ep # Etherlink III based cards
device fe # Fujitsu MB8696x based cards
device lnc # NE2100, NE32-VL Lance Ethernet cards
device sn # SMC's 9000 series of ethernet chips
device xe # Xircom pccard ethernet
# ISA devices that use the old ISA shims
#device le
# Wireless NIC cards
device an # Aironet 4500/4800 802.11 wireless NICs.=20
device awi # BayStack 660 and others
device wi # WaveLAN/Intersil/Symbol 802.11 wireless NICs.
#device wl # Older non 802.11 Wavelan wireless NIC.
# Pseudo devices - the number indicates how many units to allocate.
device random # Entropy device
device loop # Network loopback
device ether # Ethernet support
device sl # Kernel SLIP
device ppp # Kernel PPP
device tun # Packet tunnel.
device pty # Pseudo-ttys (telnet etc)
device md # Memory "disks"
device gif # IPv6 and IPv4 tunneling
device faith # IPv6-to-IPv4 relaying (translation)
# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
device bpf # Berkeley packet filter
# USB support
device uhci # UHCI PCI->USB interface
device ohci # OHCI PCI->USB interface
device usb # USB Bus (required)
#device udbp # USB Double Bulk Pipe devices
device ugen # Generic
device uhid # "Human Interface Devices"
device ukbd # Keyboard
device ulpt # Printer
device umass # Disks/Mass storage - Requires scbus and da
device ums # Mouse
device urio # Diamond Rio 500 MP3 player
device uscanner # Scanners
# USB Ethernet, requires mii
device aue # ADMtek USB ethernet
device cue # CATC USB ethernet
device kue # Kawasaki LSI USB ethernet
--=20
=46rom the age of uniformity, from the age of solitude, from the age of
Big Brother, from the age of doublethink - greetings!
--opJtzjQTFsWo+cga
Content-Type: application/pgp-signature
Content-Disposition: inline
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.1 (FreeBSD)
iD8DBQE+UWorttcWHAnWiGcRArZ5AJkBwGRd6iwKEI1nSejLpRyVykNJ/QCfevNW
NAHZx7oyq3DOHsuGoGAVwPg=
=9wBF
-----END PGP SIGNATURE-----
--opJtzjQTFsWo+cga--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030217230308.GA594>