Date: Wed, 31 Dec 2003 03:38:02 -0700 From: Scott Long <scottl@freebsd.org> To: "C. Kukulies" <kuku@www.kukulies.org> Cc: freebsd-current@freebsd.org Subject: Re: 5.2R CD hangs during boot at sym0 device Message-ID: <3FF2A70A.8010204@freebsd.org> In-Reply-To: <200312301251.hBUCp2av031723@www.kukulies.org> References: <200312301251.hBUCp2av031723@www.kukulies.org>
next in thread | previous in thread | raw e-mail | index | archive | help
C. Kukulies wrote: > I created a 5.2 boot CD from disc1.iso image. > When I boot that CD the system gets hung at the sym0 device: > > sym0: suspicious SCSI data while resetting the bus > sym0: dp0,d7/0, rst,req, ack i/o=0x3ffff, expecting 0x100 > > After a couple of seconds that last message repeats about 10 times and > then nothing. Reset button required. > > The card is a PCI card with a NCR 53C810 chip on it. > No drives are attached to it and the SIP1,2 and 3 sockets were not > populated with terminating resistors, FWIW. > > I wanted to use that card as an interface to a Mustek scanner > since I have no ISA slot anymore in that MB (an ASUS P4P8X) > After taking out the card I could continue with installation. > > > -- > Chris Christoph P. U. Kukulies kuku_at_physik.rwth-aachen.de Can you try disabling ACPI from the boot menu and seeing if that helps your problem? Scott
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3FF2A70A.8010204>