Date: Sat, 31 May 2008 16:21:41 -0300 From: "Paulo Fonseca Jr." <paulofonsecajr@gmail.com> To: "'Mario Pavlov'" <freebsd@abv.bg> Cc: freebsd-mobile@freebsd.org Subject: RES: Intel Wireless 3945ABG Message-ID: <000001c8c353$91b10ae0$b51320a0$@com> In-Reply-To: <603988992.169541.1212238759279.JavaMail.apache@mail53.abv.bg> References: <603988992.169541.1212238759279.JavaMail.apache@mail53.abv.bg>
next in thread | previous in thread | raw e-mail | index | archive | help
I try to boot with ACPI disabling (option 2) and the interrupt storm = problem was resolved but it remains the message when I run "ifconfig wpi0 up": wpi0: timeout waiting for adapter to initialize wpi0: A problem occurred loading the firmware to the driver Regards Paulo. -----Mensagem original----- De: Mario Pavlov [mailto:freebsd@abv.bg]=20 Enviada em: s=A8=A2bado, 31 de maio de 2008 09:59 Para: Paulo Fonseca Jr. Cc: freebsd-mobile@freebsd.org Assunto: Re: Intel Wireless 3945ABG >Hi, I?m using FreeBSD 7.0 on ACER 5920 4GBRAM with kernel build with = wpi >driver options like this: > >=20 > >device wpi > >device pci > >device wlan > >device wlan_amrr > >device firmware > >=20 > >and in loader.conf: > >=20 > >wpifw_load=3D=A1=B1YES=A1=B1 > >legal.intel_wpi.license_ack=3D1 > >=20 > >When I try to boot in =A1=B0normal mode=A1=B1 the system halt after = detected wpi0 and >shows this messages: > >=20 > >=A1=B0wpi0: <Intel(r) PRO/Wireless 3945ABG> irq 19 at device 0.0 on = pci6 > >wpi0: 0x1000 bytes of rid 0x10 res 3 failed (0, 0xffffffff). > >wpi0: could not allocate memory resource=A1=B1 > >=20 > >When I try to boot in =A1=B0safe mode=A1=B1 it recognize wpi but when = it?ll load >firmware shows this messages: > >=20 > >=A1=B0Interrupt storm detected on =A1=B0irq10:=A1=B1; throttling = interrupt source=A1=B1 (it >don?t stop) > >=20 > >dmesg results on safe mode: > >=20 > >=A1=B0wpi0: <Intel(r) PRO/Wireless 3945ABG> mem0xf0300000-0xf0300fff = irq 11 at >device 0.0 on pci6 > >wpi0: Ethernet address: 00:1c:bf:64:b4:0e > >wpi0: [ITHREAD] > >wpi0: 11a rates: 6Mbps 9Mbps 12Mbps=A1=AD > >wpi0: 11a rates: 1Mbps 2Mbps 5.5Mbps=A1=AD > >wpi0: 11a rates: 1Mbps 2Mbps 5.5Mbps=A1=AD > >wpi0: timeout waiting for adapter to initialize > >wpi0: A problem occurred loading the firmware to the driver > >=20 > >When I try to load the modules on loader.conf it occurs too. > >=20 > >Somebody can help me? > >Thanks very much. > >_______________________________________________ >freebsd-mobile@freebsd.org mailing list >http://lists.freebsd.org/mailman/listinfo/freebsd-mobile >To unsubscribe, send any mail to = "freebsd-mobile-unsubscribe@freebsd.org" > Hi I have exactly the same problem with exactly the same notebook seems that this problem is pretty ugly check this out: http://lists.freebsd.org/pipermail/freebsd-mobile/2008-May/thread.html for mails with subject: bge and wpi do not function on aspire 5920=20 and this: http://lists.freebsd.org/pipermail/freebsd-acpi/2008-May/thread.html for mails with subject: PCI bridge with I/O decode 0x0-0x0 so far there is no clean solution but very dirty hack a guy from the freebsd-acpi list and I are trying to at least find the problem if you have some ACPI knowledge you could help too please post here your ASL code (which should be identical to mine) thank you Regards MGP ----------------------------------------------------------------- =A7=B4=A7=EC=A7=E2=A7=E3=A7=DA =A7=E3=A7=D6 = =A7=D5=A7=D3=A7=E0=A7=DB=A7=DF=A7=DA=A7=DC! http://zoom.bg/page.php?bid=3D6
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?000001c8c353$91b10ae0$b51320a0$>