Date: Mon, 24 Jun 2002 16:16:04 -0400 (EDT) From: Joe O <joeo@cracktown.com> To: ANTOINE Pierre <nunux@free.fr> Cc: alpha@FreeBSD.ORG Subject: Re: Digital StorageWorks 300AA & HSZ40C Message-ID: <20020624153857.O218-100000@clubfoot.cracktown.com> In-Reply-To: <1024946871.3d1772b7b3021@imp.free.fr>
next in thread | previous in thread | raw e-mail | index | archive | help
You'll need to use the serial terminal attached to the scsi box to define some raid containers comprised of the disks in the array, once you do that a disk volume should appear on the scsi bus that looks and acts like a normal scsi disk to the host OS. You'll need to scare up a manual. these lines in the status; > Cache is INVALID. Cache containing unflushed data > has been removed from this controller > Battery is FAILED inidcate you (or the original purchaser) didn't buy the battery backup option on the controller card. I have no idea if the scsi adapter you mention is currently supported. On Mon, 24 Jun 2002, ANTOINE Pierre wrote: > Hi, > > My Alpha 2100A perfectly boot with FreeBSD 4.6, > my problem (previous mail) was: "Put the VGA PCI card in first PCI block"! > > I've surf a while before founding how to configure RAID on the mylex > controller, but it's finaly done. > > Now, I'm seeking informations about a Digital StorageWorks 300AA > hooked to a PCI card: KZPSA SCSI Controller. > > Is this StorageWorks Arrays supported on FreeBSD ? Has anyone an StorageWorks > working with his alpha server ? Can you see disks in SRM or you needs > to access it via a special driver ? > > On the server, I can see the SCSI interface KZPSA as pkb, doing show FRU, > and show CONFIG, but no disks. > > I've hook a serial terminal to the Digital StorageWorks 300AA, playing at > 9600 bauds and get a prompt. Any command fail and suggest to do a "SHOW > THIS_CONTROLLER" so i give you the result: > > HSZ40C>SHOW THIS_CONTROLLER > Controller: > HSZ40 ZG61200481 Firmware V34Z-0, Hardware A02 > Not configured for dual-redundancy > SCSI address 7 > Time: NOT SET > Host port: > SCSI target(s) (0), Preferred target(s) (0) > TRANSFER_RATE_REQUESTED = 10MHZ > Cache: > 32 megabyte write cache, version 2 > Cache is INVALID. Cache containing unflushed data > has been removed from this controller > Battery is FAILED > Unknown unflushed data in cache > CACHE_FLUSH_TIMER = DEFAULT (10 seconds) > CACHE_POLICY = A > NOCACHE_UPS > Host Functionality Mode = A > This controller has an invalid cache module > Invalid cache -- CLI command set reduced. Type SHOW THIS_CONTROLLER. Please- > see user guide to determine corrective action > HSZ40C> > > Thanks for your tips. > > ---------------- > ANTOINE Pierre > > nunux@free.fr > --------------- > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-alpha" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-alpha" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20020624153857.O218-100000>