Date: Sun, 19 Jan 2003 18:25:10 -0700 From: "Russell L. Carter" <rcarter@pinyon.org> To: freebsd-current@freebsd.org Subject: Re: STABLE->CURRENT rl fails Message-ID: <20030120012510.ED890319@pinyon.org> In-Reply-To: Message from "Russell L. Carter" <rcarter@pinyon.org> of "Sat, 18 Jan 2003 11:29:40 MST." <20030118182940.D9B87147@pinyon.org>
next in thread | previous in thread | raw e-mail | index | archive | help
Ok-dokey, over to linux it goes. Rats. Russell : : : Perhaps there's a nice search string that will cough up what : to do, if there's hope? This laptop is perfectly stable with : STABLE. (But no sound or acpi...) : : Thanks, : Russell : : : : : Trial upgrade from a laptop running stable just fine for the last : : six months to current (GENERIC) is still failing with the same symptoms: : : : : On board rl0 comes up just fine, but a transfer hangs : : after about 150KB or so. After a minute or two, the laptop reboots. : : : : That's at 100BaseTX, plus the various mediaopts. At 10BaseT, : : it takes longer during a file transfer to trigger the problem, but : : it gets there after a megabyte or so. : : : : I've attached a dmesg, interesting "lock order reversal" item in it. : : : : I'm willing to dedicate a week or so to get this thing up because it's : : one of those ACPI only laptops. : : : : Tell me what to do to get better info... : : : : Thank you, : : Russell : : : : : : Copyright (c) 1992-2003 The FreeBSD Project. : : Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 : : The Regents of the University of California. All rights reserved. : : FreeBSD 5.0-CURRENT #0: Fri Jan 17 08:55:47 MST 2003 : : root@chomsky.hq.pinyon.org:/usr/obj/usr/src-current/src/sys/GENERIC : : Preloaded elf kernel "/boot/kernel/kernel" at 0xc06c3000. : : Preloaded elf module "/boot/kernel/acpi.ko" at 0xc06c30a8. : : Timecounter "i8254" frequency 1193182 Hz : : Timecounter "TSC" frequency 1991920132 Hz : : CPU: Intel(R) Pentium(R) 4 CPU 2.00GHz (1991.92-MHz 686-class CPU) : : Origin = "GenuineIntel" Id = 0xf24 Stepping = 4 : : Features=0x3febf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV, : : PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM> : : real memory = 520093696 (496 MB) : : avail memory = 497917952 (474 MB) : : Initializing GEOMetry subsystem : : Pentium Pro MTRR support enabled : : npx0: <math processor> on motherboard : : npx0: INT 16 interface : : acpi0: <PTLTD RSDT > on motherboard : : ACPI-0625: *** Info: GPE Block0 defined as GPE0 to GPE15 : : ACPI-0625: *** Info: GPE Block1 defined as GPE16 to GPE31 : : Using $PIR table, 7 entries at 0xc00fdf50 : : Timecounter "ACPI-fast" frequency 3579545 Hz : : acpi_timer0: <24-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0 : : acpi_cpu0: <CPU> on acpi0 : : acpi_tz0: <thermal zone> on acpi0 : : pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 : : pci0: <ACPI PCI bus> on pcib0 : : agp0: <SIS Generic host to PCI bridge> mem 0xe8000000-0xe8ffffff at device 0.0 : : on pci0 : : pcib1: <PCIBIOS PCI-PCI bridge> at device 1.0 on pci0 : : pci1: <PCI bus> on pcib1 : : pci1: <display, VGA> at device 0.0 (no driver attached) : : isab0: <PCI-ISA bridge> at device 2.0 on pci0 : : isa0: <ISA bus> on isab0 : : ohci0: <SiS 5571 USB controller> mem 0xe9000000-0xe9000fff irq 11 at device : : 2.2 on pci0 : : usb0: OHCI version 1.0, legacy support : : usb0: SMM does not respond, resetting : : usb0: <SiS 5571 USB controller> on ohci0 : : usb0: USB revision 1.0 : : uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 : : uhub0: 2 ports with 2 removable, self powered : : ums0: Mitsumi Mitsumi Quick Scroll Mouse (USB), rev 1.00/1.05, addr 2, iclass : : 3/1 : : ums0: 3 buttons and Z dir. : : ohci1: <SiS 5571 USB controller> mem 0xe9001000-0xe9001fff irq 10 at device : : 2.3 on pci0 : : usb1: OHCI version 1.0, legacy support : : usb1: <SiS 5571 USB controller> on ohci1 : : usb1: USB revision 1.0 : : uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 : : uhub1: 2 ports with 2 removable, self powered : : atapci0: <SiS 5591 ATA100 controller> port 0x1000-0x100f at device 2.5 on pci0 : : ata0: at 0x1f0 irq 14 on atapci0 : : ata1: at 0x170 irq 15 on atapci0 : : pci0: <multimedia, audio> at device 2.7 (no driver attached) : : rl0: <RealTek 8139 10/100BaseTX> port 0x1400-0x14ff mem 0x6004800-0x60048ff : : irq 11 at device 10.0 on pci0 : : rl0: Realtek 8139B detected. Warning, this may be unstable in autoselect mode : : rl0: Ethernet address: 00:90:f5:12:59:3b : : miibus0: <MII bus> on rl0 : : rlphy0: <RealTek internal media interface> on miibus0 : : rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto : : pci0: <serial bus, FireWire> at device 11.0 (no driver attached) : : cbb0: <TI1410 PCI-CardBus Bridge> mem 0x88000000-0x88000fff irq 5 at device : : 12.0 on pci0 : : cardbus0: <CardBus bus> on cbb0 : : pccard0: <16-bit PCCard bus> on cbb0 : : acpi_button0: <Power Button> on acpi0 : : acpi_button1: <Sleep Button> on acpi0 : : acpi_acad0: <AC adapter> on acpi0 : : acpi_cmbat0: <Control method Battery> on acpi0 : : acpi_lid0: <Control Method Lid Switch> on acpi0 : : atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 : : atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 : : kbd0 at atkbd0 : : psm0: <PS/2 Mouse> irq 12 on atkbdc0 : : psm0: model Generic PS/2 mouse, device ID 0 : : sio0 port 0x3f8-0x3ff irq 4 on acpi0 : : sio0: type 16550A : : acpi_ec0: <embedded controller> port 0x66,0x62 on acpi0 : : orm0: <Option ROMs> at iomem 0xdc000-0xdffff,0xc0000-0xcbfff on isa0 : : pmtimer0 on isa0 : : fdc0: cannot reserve I/O port range (6 ports) : : ppc0: parallel port not found. : : sc0: <System console> at flags 0x100 on isa0 : : sc0: VGA <16 virtual consoles, flags=0x300> : : sio1: configured irq 3 not in bitmap of probed irqs 0 : : sio1: port may not be enabled : : vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 : : Timecounters tick every 10.000 msec : : acpi_cpu: CPU throttling available, 8 steps from 100% to 12.5% : : ad0: 28615MB <TOSHIBA MK3017GAP> [58140/16/63] at ata0-master UDMA100 : : acd0: CD-RW <DW-28E> at ata1-master PIO4 : : Mounting root from ufs:/dev/ad0s1a : : lock order reversal : : 1st 0xc4013068 process lock (process lock) @ /usr/src-current/src/sys/kern/ker : : n_descrip.c:2100 : : 2nd 0xc4030134 filedesc structure (filedesc structure) @ : : /usr/src-current/src/sys/kern/kern_descrip.c:2107 : : rl0: discard oversize frame (ether type fbf7 flags 3 len 2992 > max 1514) : : rl0: discard oversize frame (ether type fbf7 flags 3 len 2992 > max 1514) : : rl0: discard oversize frame (ether type 2e3d flags 3 len 55442 > max 1514) : : rl0: discard oversize frame (ether type 904 flags 3 len 36106 > max 1514) : : : : Fatal trap 12: page fault while in kernel mode : : fault virtual address = 0x46 : : fault code = supervisor read, page not present : : instruction pointer = 0x8:0xc02f19c0 : : stack pointer = 0x10:0xd9344ca4 : : frame pointer = 0x10:0xd9344cbc : : code segment = base 0x0, limit 0xfffff, type 0x1b : : = DPL 0, pres 1, def32 1, gran 1 : : processor eflags = interrupt enabled, resume, IOPL = 0 : : current process = 832 (reboot) : : trap number = 12 : : panic: page fault : : : : : : : : To Unsubscribe: send mail to majordomo@FreeBSD.org : : with "unsubscribe freebsd-current" in the body of the message : : : : To Unsubscribe: send mail to majordomo@FreeBSD.org : with "unsubscribe freebsd-current" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030120012510.ED890319>