Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 18 Oct 2002 10:11:59 +0100
From:      "local.freebsd.stable" <freebsd-stable-local@insignia.com>
To:        "'freebsd-stable@freebsd.org'" <freebsd-stable@freebsd.org>
Subject:   A couple of problems going from 4.5 to 4.7
Message-ID:  <2F03DF3DDE57D411AFF4009027B8C3670289D3FF@exchange-uk.isltd.insignia.com>

next in thread | raw e-mail | index | archive | help
I did an upgrade from 4.5 to 4.7 on an Asus
Terminator Tualatin. Now, dmesg shows me:

>pcm0: <SiS 7018> port 0xd000-0xd0ff mem 0xea000000-0xea000fff irq 10 at
device 1
>.4 on pci0
>codec timeout writing 0, data 0
>codec timeout during read of register 26
>codec timeout during read of register 26
>codec timeout during read of register 26

after a few hundred of these I get:

>pcm0: AC97 reset timed out.codec timeout writing 26, data 0
>codec timeout during read of register 0
>codec timeout during read of register 7c
>codec timeout during read of register 7e

This goes on for a bit, then:

>codec timeout during read of register 26
>pcm0: ac97 codec reports dac not ready
>codec timeout writing 1c, data 8000
>codec timeout writing 1a, data 0

This is not a problem since the machine is used as a
router/firewall and sound is unimportant, so for a
workaround I'll remove pcm from the kernel (I can't
recall now why I added it in the first place).

I couldn't find anything obvious in /usr/src/UPDATING
or the LINT kernel config file.

The other problem is that the adsl.sh script which 
fires up ppp with the pppoa daemon for DSL access
via an Alcatel USB modem fails when run during
bootup, but works if run a few minutes later. I'm
still investigating this.

jim

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?2F03DF3DDE57D411AFF4009027B8C3670289D3FF>