Date: Tue, 26 Aug 1997 22:21:29 GMT From: wjw@digi.digiware.nl (Willem Jan Withagen) To: flexfax@sgi.com Cc: questions@freebsd.org Subject: Problems with FreeBSD 2.2.1 and Hylafax Message-ID: <199708262221.WAA29326@digi.digiware.nl>
next in thread | raw e-mail | index | archive | help
Well that the point where I'm at, at the moment. My old situation: Running FreeBSD 2.1.7 on a lowly 486 with nothing fancy, Fax: HylaFax v3.?? with a basic rockwell 28k8 modem This configuration has worked in various modes for more than a year. Until I upgraded to: FreeBSD 2.2.1 And then trouble started, so first I blamed the modem. And swapped it with a Zyxel 1496E, firmware 6.01. But the results stayed the same. Then I upgraded HylaFax to 4.0p1 (with a lot of hassle, like tiff and jpeg) But still with te same affect: When receiving a fax, the receiver terminates communication after 1 page. I've tried setting several of the options to be less sensitive to errors. But everything has failed thusfar. Looking at the log, which is everytime identical other than the number of error-lines. HylaFax Logfile and configuration are appended. The prize question is of course: Has somebody solved this problem? Is this a FreeBSD 2.2.x problem, or is HylaFax the cullpit? Thnx, Willem Jan Aug 26 23:00:45.98: [26093]: SESSION BEGIN 00000002 31402910774 Aug 26 23:00:45.98: [26093]: <-- [4:ATA\r] Aug 26 23:01:05.97: [26093]: --> [11:CONNECT FAX] Aug 26 23:01:05.99: [26093]: ANSWER: FAX CONNECTION Aug 26 23:01:06.01: [26093]: RECV FAX: begin Aug 26 23:01:06.13: [26093]: --> [5:+FCON] Aug 26 23:01:09.67: [26093]: --> [27:+FTSI: +31 40 2439062 ] Aug 26 23:01:09.67: [26093]: REMOTE TSI "+31 40 2439062" Aug 26 23:01:09.67: [26093]: --> [21:+FDCS:0,5,0,2,1,0,0,0] Aug 26 23:01:09.68: [26093]: REMOTE wants 14400 bit/s Aug 26 23:01:09.68: [26093]: REMOTE wants page width 1728 pixels in 215 mm Aug 26 23:01:09.68: [26093]: REMOTE wants unlimited page length Aug 26 23:01:09.68: [26093]: REMOTE wants 3.85 line/mm Aug 26 23:01:09.68: [26093]: REMOTE wants 2-D MR Aug 26 23:01:09.68: [26093]: --> [2:OK] Aug 26 23:01:09.68: [26093]: <-- [7:AT+FDR\r] Aug 26 23:01:11.29: [26093]: --> [5:+FCFR] Aug 26 23:01:11.29: [26093]: --> [27:+FTSI: +31 40 2439062 ] Aug 26 23:01:11.29: [26093]: REMOTE TSI "+31 40 2439062" Aug 26 23:01:11.29: [26093]: --> [21:+FDCS:0,5,0,2,1,0,0,0] Aug 26 23:01:11.30: [26093]: REMOTE wants 14400 bit/s Aug 26 23:01:11.30: [26093]: REMOTE wants page width 1728 pixels in 215 mm Aug 26 23:01:11.30: [26093]: REMOTE wants unlimited page length Aug 26 23:01:11.30: [26093]: REMOTE wants 3.85 line/mm Aug 26 23:01:11.30: [26093]: REMOTE wants 2-D MR Aug 26 23:01:11.97: [26093]: --> [7:CONNECT] Aug 26 23:01:11.97: [26093]: RECV: begin page Aug 26 23:01:12.02: [26093]: RECV: send trigger 022 Aug 26 23:01:12.02: [26093]: <-- data [1] Aug 26 23:01:56.88: [26093]: RECV: 423 total lines, 0 bad lines, 1 consecutive bad lines Aug 26 23:01:56.89: [26093]: --> [7:+FPTS:1] Aug 26 23:02:04.04: [26093]: --> [9:+FHNG:100] Aug 26 23:02:04.08: [26093]: REMOTE HANGUP: Unspecified Phase D error (code 100) Aug 26 23:02:04.08: [26093]: --> [2:OK] Aug 26 23:02:04.09: [26093]: RECV FAX (00000002): recvq/fax00002.tif from +31 40 2439062, route to <unspecified>, 0 pages in 0:58 Aug 26 23:02:04.12: [26093]: RECV FAX: Unspecified Phase D error Aug 26 23:02:04.17: [26093]: RECV FAX (00000002): session with +31 40 2439062 terminated abnormally: Unspecified Phase D error Aug 26 23:02:04.17: [26093]: RECV FAX: bin/faxrcvd "recvq/fax00002.tif" "ttyd0" "00000002" "Unspecified Phase D error" Aug 26 23:02:05.24: [26093]: RECV FAX: end Aug 26 23:02:05.25: [26093]: SESSION END The configuration file used is: # $Id: zyxel-1496e,v 1.31 1996/06/24 02:58:43 sam Rel $ CountryCode: 31 AreaCode: 40 FAXNumber: +31.40.2910774 LongDistancePrefix: 0 InternationalPrefix: 00 DialStringRules: etc/dialrules.europe ServerTracing: 1 SessionTracing: 11 RecvFileMode: 0600 LogFileMode: 0600 DeviceMode: 0600 RingsBeforeAnswer: 1 SpeakerVolume: off GettyArgs: "-h %l dx_%s" LocalIdentifier: "Digiware/Medusa" TagLineFont: etc/lutRS18.pcf TagLineFormat: "From %%l|%c|Page %%p of %%t" NoCarrierRetrys: 3 PercentGoodLines: 90 MaxConsecutiveBadLines: 25 MaxRecvPages: 25 # # # Modem-related stuff: should reflect modem command interface # and hardware connection/cabling (e.g. flow control). # ModemType: Class2 # use class 2 interface ModemRate: 38400 # 38.4 works fine ModemFlowControl: rtscts # default # ModemNoFlowCmd: AT&H0 # disable flow control ModemHardFlowCmd: AT&H3 # hardware flow control ModemSoftFlowCmd: AT&H4 # software flow control ModemSetupDTRCmd: AT&D2 # DTR off causes modem to hang up ModemSetupDCDCmd: AT&C1 # DCD tracks carrier ModemSetupAACmd: AT+FAA=1 # enable in current class # ModemSendFillOrder: LSB2MSB # as expected ModemRecvFillOrder: MSB2LSB # opposite of what makes sense Class2RecvDataTrigger: "\022" # a la 2388-B # ModemResetCmds: AT&B1&N0&S0*F0S18=2S38.3=1S39=0 # ModemDialCmd: ATDT%s # no '@' 'cuz then busy not recognized NoCarrierRetrys: 3 # retry 3 times on no carrier # ModemSetVolumeCmd: "ATM0 ATM1L1 ATM1L3 ATM1L5 ATM1L7" # PagerSetupCmds: AT&K0&N15 # use V.22 at 1200 bps (PageNet) # # Rev 6.1x firmware have a bug in the ECM support so # explicitly disable it's use. To re-enable its use just # comment out the following line. # Class2DCCQueryCmd: "!(0,1),(0-5),(0-4),(0-2),(0,1),(0),(0),(0-7)"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199708262221.WAA29326>